Products in Paints & Coatings: Polyols

Bakelite® PF 9640 LG resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

Girnar Industries Blown Castor Oil is a honey-golden vicious liquid derived after oxidative polymerization and due to this fact, it is also known as oxidized castor oil or polymerized castor oil. It is prepared by blowing air or oxygen into castor oil at various temperatures of 80-1300C.

Polem A JS is a solvent free high viscos two-component Polyurethane system.

Swisloyd Linseed Stand Oil is obtained from the dried, ripened seeds of the flax plant (Linum usitatissimum). The Linseed is broken and heated up to 70 C. With this temperature the oil can be crushed more easily out of the seed and the best quality oil for technical purpose can be reached. It is Drying oil with polymer-forming properties.

Bakelite® PF 9435 LA resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

PETOL® 400-3 is a propoxylated glycerol, low viscosity polyether polyol triol with an average molecular weight of 440.

Avox® 380 PS is an aromatic highly functional polyester polyol. This material is made from recycled and renewable resources.

Korea PTG PTMEG-1400 consistently produces high quality PTMEG products in continuous process. As a compound of THF, it is transparent liquid with viscosity at a temperature higher than ambient temperature. The PTMEG is mainly used as a raw material of polyurethane, elastomer, polyester elastomer and spandex fabric.

Nivapol Polycoat CFM is a solvent free, two component, colored waterproofing membrane. It is reactive and can only be applied by special, two component spray equipment.

Bakelite® PF 6292 LA resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

Drokryl™ 7863 is a hydroxyl functional acrylic polyol resin formulated for cross linking with polyisocynates at ambient temperature.

Genesee Polymers’GP-690 ABA SILICONE POLYOL COPOLYMER is a 100% active non-ionic silicone polyol block copolymer with the following structure: P-690 contains polyoxyethylene blocks and dimethyl silicone polymer blocks, which are joined through non-hydrolyzable silicon to carbon bonds.GP-690 ABA SILICONE POLYOL COPOLYMER is designed to function as an emulsifier, wetting agent and profoaming additive for a variety of applications including: polyurethane foams, hard surface cleaners and polishes, and cosmetic formulations.GP-690 contains a primary hydroxyl group at each end of the molecule, allowing for reaction with isocyanates in polyurethane resin systems. This is expected to improve flow and leveling of polyurethane coatings and impart non-stick characteristics to the cured coatings.In textile applications, GP-690 is suggested as a fiber lubricant where more thermal stability is needed than is provided by organic lubricants such as stearates or mineral oils.GP-690is soluble in lower alcohols (EtOH, IPA) and dispersible in water, along with aliphatic and aromatic hydrocarbons.

Bakelite® PF 0746 LA resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

RESILAC 570 is a Modified acrylic polyol represent a special group of amorphous polyols, obtained by radical copolymerisation of acrylic monomers such as acrylic or methacrylic acids and esters. The source of hydroxyl groups in these acrylic polyols is the utilization in the radical copolymerisation reaction of hydroxyalkyl acrylates or hydroxyalkyl methacrylates as comonomers. The acrylic polyols are used in high-performance polyurethane (PU) coatings mainly for automotive and marine coatings.C&E offers a range of high performance, high solids and low VOC acrylic polyols. specialty chemical manufatcurer.

Sehotech SH-526 is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in freezer and internal insulation.

AFEX™ SB20C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

PETOL® 250-3 is a propoxylated glycerol, polyether polyol triol with an average molecular weight of 670.

Korea PTG PTMEG-1800 consistently produces high quality PTMEG products in continuous process. As a compound of THF, it is transparent liquid with viscosity at a temperature higher than ambient temperature. The PTMEG is mainly used as a raw material of polyurethane, elastomer, polyester elastomer and spandex fabric.

Sehotech SH-510W is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in water-blown flexible foam.

Purol® R-09 has Phthalic Andydride base used adhesives, PU coatings, PU rigid foam, Elastomers.

CARPOL® GSP-355 is a glycerine/sucrose initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of 4.5 and a typical hydroxyl number of 355. Due to this polyol’s high functional nature, it is typically used in rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to low degrees of crosslinking. In addition, Carpol® GSP-355 is a neutral material, which presents the formulator with complete catalytic control over a system.

Puranol D 210 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

Polem A 1160 is a branched, castor oil-based polyol.

Polem A MC is a two component, clear aliphatic polyurethane coating. It provides excellent abrasion resistance, improved scratch resistance and a clear, mat finish.

Pentaerythritol 86 grade is used to produce Alkyd resin, paint, ink, rosin, tall oil, dry oil, explosives, plasticizer, stabilizer, cosmetics.

Bakelite® PF 6535 LB resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

Changshu Yitong Polyurethane Product YT-310 is case polyether polyols which is used in PU crossing liking and PU coatings.

Pentaerythritol 95 gradeis used to produce Alkyd resin, paint, ink, rosin, tall oil, dry oil, explosives, plasticizer, stabilizer, cosmetics.

CARPOL® PGP-2012 s a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 2000. This diol is polymerized with propylene oxide and then capped with 12% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart Carpol® PGP-2000. Main applications include C.A.S.E., however, Carpol® PGP-2012 may also be included as a component in other urethane products and formulations.

Genesee Polymers' GP-226 SILICONE POLYOL COPOLYMER is a 100% active polyoxyethylene modified dimethylpolysiloxane block copolymer.GP-226 is water-dispersible and resistantto breakdown by hydrolysis due to the presence of stable ≡ Si –C ≡ bonds between silicone and polyol block sections. GP-226 SILICONE POLYOL COPOLYMER is recommended for use as a wetting agent oremulsifier in water-based coatings, inks, polishes and hard surface cleaners. Additionally, GP-226 may be used as a dispersing agent for the incorporation of clays, pigments and other powders in water.

Sehotech SP-330AP is mainly applied in metal panels, spray foams, appliances and pour-in-place. It also has characteristics that improves green strength and thermal resistance.

Bakelite® PF 0733 LG resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.

Pentaerythritol 90 grade is used to produce Alkyd resin, paint, ink, rosin, tall oil, dry oil, explosives, plasticizer, stabilizer, cosmetics.

Girnar Industries Castor Oil Commercial Grade is obtained from the seeds of Ricinus Communis, which is a pale yellow, viscous, oily liquid insoluble in water. It contains more than 87% of a unique hydroxy fatty acid viz. Ricinoleic acid.

Jurong Ningwu New Material Development NJ-204A can be used to produce coatings, adhesives, sealants, elastomers, etc.

Bakelite® PF 8995 LG resins serve as excellent crosslinking agents for epoxy, polyester, alkyd and other resin systems to form coatings with good adhesion and chemical resistance properties. Crosslinking takes place either under high temperature (-180°C) or via acid catalysts. They are used with epoxy and polyester resins to produce chemically resistant coatings for food contact and anti-corrosion coatings.