Products in Industrial Maintenance

Prasad International Pigment Orange 5 is recommended for decorative paints and general industrial paints.

VOXCO CHROME YELLOW VUAH-350 is suitable for use in Alkyd / Stoving, Industrial, Automotive /Refinish / Road Marking, Powder Coating

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Genable® 3001 dispersion consists of graphene nanoplatelets stabilized in epoxy resin (EEW = 250g/eq.). The graphene nanoplatelets are a synthesized form of graphene produced by a patented process. A formulation-ready Genable® epoxy resin, Genable® 3001 dispersion has been developed to enhance the anti-corrosion performance of coatings on steel substrates by the use of a patented active, non-metallic anti-corrosion additive.

Short-oil alkyd resin modified with phenolic resin

LIONOL BLUE ESP-S is an epsilon form phthalocyanine blue pigment with a very bright reddish shade, high color strength and excellent rheological properties.

Razeen® SL 4072X75 is a typical type 2 epoxy resin based on Bisphenol A as solvent cut 75% in Xylene. The resin is similar to solid resin Razeen® SR 5072 in performance.

Pudralac 2340 gives good flow and excellent mechanical properties. It is blooming free from 140°C. It is suitable for textured applications.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

SUSPENO 201-MS is a low viscosity agent for improving the brushability and leveling of architectural paints and maintenance coatings. It is an organic compound, specifically designed to provide rheological control for pigmented systems; improvement in brushing and leveling, pigment suspension and control of sagging.SUSPENO 201-MS is neutral, chemically non-reactive and does not require heat or activation. It is unaffected by the nature of the binder, oils, resins, varnishes or vehicles. It has no influence on gloss, color, color retention, drying time, flexibility, water and chemical resistance, adhesion or durability. Being moisture free, it will not cause rusting in containers and is safe for use with zinc dust.

Epilox T 19-36/1000 is a modified, low viscosity epoxy resin with reduced crystallization tendency. Crosslinking with suitable curing agents is preferably performed at room temperature.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Benda-Lutz Leafing 1051 exhibits high surface tension due to which the pigment migrates towards the surface of paint film. This enrichment at the boundary protects the paint film from weathering, radiation and corrosion. Provides a strong reflective metal layer at the paint surface giving high metallic brilliance and gloss. Preferred applications include corrosion protection, reflective, maintenance, marine, roof, high heat resistance, chrome effect, and aerosol paints and coatings.

NOVALKYD L1664-60ANWS is a special long oil alkyd for impregnations and paints on wood and porous substrates.

Aqueous styrene Acrylic emulsion

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Vibfast Red 4030-2 is a Organic Pigment.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Prasad International Pigment Yellow 1 is recommended for decorative paints but limited suitability to automotive paints and general industrial paints.

A moderate defoamer with Minimum side effects

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Prasad International Pigment Orange 13 is recommended for automotive paints, general industrial paints and powder coatings but limited suitability to decorative paints.

Asiafine Chemical Infinitra Pink 122BT is a Organic pigment used for industrial and automotive paints, decorative paints, printing inks, plastics and various special applications.

VOXCO CHROME YELLOW VSO-350 is suitable for use in Alkyd / Stoving, Industrial, Coil Coating, Automotive /Refinish / Road Marking, Powder Coating

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

Genesee Polymers' GP-422 SILICONE RESIN SOLUTION is a concentrated mixture of a reactive, further curable silicone resin in an octamethylcyclotetrasiloxane carrier. GP-422 forms a continuous solid resin film, when applied to substrates and allowed to air dry. Curing to a solvent resistant coating takes place over a prolonged time period at room temperature, but may be accelerated by heating at 200°C for one hour.GP-422 is suggested for use as a binder in coatings intended for application to substrates exposed to high temperatures, and as a component of masonry water-repellent formulations.

Ply-Guard AS is a fast-curing, two-component polyaspartic (aliphatic polyurea) coating system. Ply-Guard AS exhibits superior color and gloss retention, excellent abrasion resistance, good flexibility, and can be applied directly to properly prepared concrete or metal surfaces. In addition, Ply-Guard AS has very good corrosion, chemical, and UV resistance, and can achieve a uniform coating thickness of 2-8 mils DFT per coat that is free of bubbles and pinholes.

Vibfast Red 4027 is a Organic Pigment.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Razeen® SL 4171X75 is a typical type 1 epoxy resin based on Bisphenol A as solvent cut 75% in Xylene. The resin is similar to solid resin Razeen® SR 5071.

Asiafine Chemical Brown 5610 is a Organic pigment used for industrial and automotive paints, decorative paints, printing inks, plastics and various special applications.

DCL Corporation Brown 19 FDA is a yellow-brown powder produced by high temperature calcination. This pigment has good UV and visible opacity, high infrared reflection, is chemically inert, heat resistant, and stable to ultraviolet light. It is nonbleeding and non-migratory. It has low heat build-up and has exceptional durability and hiding power, and is generally used in applications where resistance to heat, light, and weather are needed. It is compatible with most resin systems and polymers, and is non-warping. Typical applications (non inclusive) are liquid and powder coatings, inks, dispersions, and other applications where equivalent pigment chemistry is used.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings