Products in Specialty Coatings: Filler

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ NP-30 is a non-porous, heat-treated silica particle. Belonging to the NP-series, it has a very high hardness, so it is often used as a filler for increasing resin hardness. The high refractiveness of these grades offers good transparency when added to resins and films. It is also used for anti-blocking in film applications. The NP-series has excellent heat resistance and is very dimensionally stable at various temperature ranges.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ NP-200 is a non-porous, heat-treated silica particle. Belonging to the NP-series, it has a very high hardness, so it is often used as a filler for increasing resin hardness. The high refractiveness of these grades offers good transparency when added to resins and films. It is also used for anti-blocking in film applications. The NP-series has excellent heat resistance and is very dimensionally stable at various temperature ranges.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ NP-100 is a non-porous, heat-treated silica particle. Belonging to the NP-series, it has a very high hardness, so it is often used as a filler for increasing resin hardness. The high refractiveness of these grades offers good transparency when added to resins and films. It is also used for anti-blocking in film applications. The NP-series has excellent heat resistance and is very dimensionally stable at various temperature ranges.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Novacite® L-337 is finer than L-207A Novacite®. Normally the product will disperse to a 7 Hegman Grind. All particles are individually platey with few clusters. 98% of the particles will fall between one and ten microns. L-337 as fine as it is still has the uniqueness of low binder demand with superior flow properties.

FUMISIL® 380 is a fluffy white-blue fine amorphous powder with extremely small particle size, enormous surface area and high purity, without taste and odor.

BRIOMICA® 212 is a dry-ground ultra-white mica powder.

HALTEX® 310 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

Novakup® 1250 is a surface modified or silane treated lamellar quartz. This is 100% passing 44 microns. 1250 Novakup® is preferred for its’ added mechanical strength and barrier protection within chemical and corrosion resistant applications. Novakup® is the only silane treated, lamellar quartz offered within the industry.

MICA-SOFT® 15/12 W is a wet-ground silky pure mica fine powder.

HALTEX® 302 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

BRIOMICA® 82 is a dry-ground ultra-white fine mica powder.

Novacite® 1250 is a premium 325 mesh product. Normally, it is 100% finer than 44µ. This outstanding product has been preferred for over 35 years in thermoset molding compounds. We would not hesitate to recommend 1250 Novacite® for almost any application in the polymer field in its range of fineness.

MICA-SOFT® 30 is a wet-ground silky pure mica small flakes.

BRIOMICA® 262 is a dry-ground ultra-white small mica flakes.

HALTEX® 304 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

HALTEX® 315 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.