Products in Other Printing & Packaging Applications

Huai’an Feiyang White Titanium A Size TiO2 has a mesh Size 8-150.

Briture Chlorinated EVA (CEVA) is soluble in toluene and xylene. It has elasticity like rubber, good solubility and fluidity at room temperature. In addition, it has good weather resistance, chemical resistance, oil resistance, ozone resistance and flame resistance property.

Foral 85 resin is the glycerol ester of highly hydrogenated wood rosin. It is an exceptionally pale thermoplastic resin that has outstanding resistance to oxidation and to discoloration caused by heat and aging.

Gold Reef Speciality Chemicals GR 1102 is polymer composed of crosslinked and polyvinyl acetate copolymer emulsion.

B. Schoenberg BSC 50-100 Polyethylene Concentrate is suitable for tubing, profile, sheet, blow molding and injected molding applications. For best results, use in polyethylene injection molded or extruded polyethylene parts.

ZE512364 is a Poly-Vinyl Acetochloride (PVC).

Neelanjana Polymers Ready To Mix Pigments find wide use in household.

Disparlon AQ-330 is a solvent free wetting and dispersing agent based on polymer with phosphoric acid group ester, designed for metallic pigments (i.e. aluminum paste, pearlescent pigments etc.) pre-dispersion in water-borne coating systems.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

Karntner Montanindustrie Submicro 4-15 is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

Iron Oxide Black CI 3950 is used in Paint, Plastic, Rubber, Construction

SS-SIL 290 is micronized Silica (Gel Type). It used as matting agent, anti-blocking agent and anti-cake agent.

Kwik Set Cyan is a duct-fresh used in fast-setting of all-round process ink series. It is ideal for straight-line printing on any multicolor printing equipment. The advantages of Kwik Set include good print clarity, nice gloss, and rapid setting.

ADD-PA m 2401 is flow aids that has been developed specifically for use in transparent products.This product series has been developed for use in transparent applications such. B. films. Here are the major factors an excellent distribution and the optimal transparency of the final products.

Phthalo Blue BNF-02 is used as aqueous in printing ink.

Karntner Montanindustrie HAR 50 is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

DuClear® QR80A is a polypropylene random copolymer (produced with a phthalate-free catalyst), suitable for injection molding applications. The product is clarified and contains an anti-electro static agent. Duclear® qr80a features a very good transparencyandaestheticappearance,a good balance of stiffnessand impact strength, good organoleptics, low blooming,and energy & cycle time savings.

HFW00346 High Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers medium molecular weight material with broad molecular weight distribution copolymer which has been specifically designed for the production of high strength blown film of various thicknesses even down to below 10 micron. It can be easily processed on normal HDPE blown film lines, using melt temperatures between 200 and 220°C.

Colquimica Adhesives M-40 is a material that is used in flat lamination and profile wrapping.

Spredox® D-953 is used for organic blue / green and carbon black pigments in the water-based and alcohol-based systems.Spredox® is a dispersing agents which is developed to disperse and stabilize pigments in coating, ink, and plastics.

Dynax DX4005N is a highly effective and efficient fluorosurfactant, especially designed to provide rapid spreading, wetting and leveling performance to various water-based coating systems, such as paints, inks, floor polishes, etc., on low surface tension substrates that are difficult to wet out. DX4005N provides both superior dynamic and equilibrium surface tensions compared to conventional surfactants including fluorochemical and silicone surfactants: it quickly lowers the surface tension of aqueous solutions down to 16 dynes/cm at a very low concentration. DX4005N can be used without a de-foaming agent because of its low foaming tendency.

A daylight fluorescent pigment for paper coatings, gravure and textile printing and all low film weight applications requiring optimum strength. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoplastic copolymer.

Ulmer Weiss 2-3 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 2-3 is similar to sand or gravel in appearance with a characteristic odor and grain size of 2.0-3.0. This product does not flash and is non flammable.

New Color Chemical Fluorescent Pigment Red is composed by tiny and opaque thermosetting micro- spherical particles with excellent dispersity and light scattering ability (opacity).It has strong coloring capacity to give out pure and intense color. Its impermeable property makes it suitable for use in many kinds of solvents, especially vinyl plastics and plastics. Fluorescent pigment can thus be mixed with colors in various medium.

T Nova Red 2 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Origo Chemical Pigment Red 170 is a classic economic red for industrial finishes.

Fixatti AG EPO PES SP 100 FC is a Epoxy-Polyester Starpow.

Epoxy Acrylate Oligomers

TITANIUM DIOXIDE ANATASE A-12 are formulated applicable to PVC, film laminating, latex paints, rubber, masterbatch, plastic, and etc.

ZE14A959 is a Nitrocellulose E (plasticized citrate).

Chemguard S-764P is a short chain, phosphate ester type fluorosurfactant. It is water based and free from volatile organic compounds (VOC). It provides surface tensions as low as 17 dyn/cm in water at very low concentrations. ChemguardS-764P imparts enhanced wetting, spreading, leveling, and flow control properties on various types of water based coatings for architectural paints and stains, concrete coatings, industrial coatings, and aqueous hydrocarbon surfactant solutions. ChemguardS-764P has excellent dynamic surface tension properties which allow for the rapid attainment of low equilibrium surface tensions. It is low foaming and provides dirt pick-up resistance to exterior paints and interior low-gloss paints, sealers, and stains.

EVERSTAB P is a strong absorber of UV radiation. It has excellent photostability to polymers against UV light exposure in many ways i.e. retarding color yellowing, preventing embrittlement, maintaining of mechanical properties etc. EVERSTAB P is particularly effective in styrenic polymers, PVC, unsaturated polyesters, polyurethane, acrylic polymers adhesives

Versal® YELLOW 8GN is Disazocond pigment. Used in flexografic, gravure, offset, letter inks and water based paints.

Foamazol™ 60 is recommended for applications where relatively high temperatures are used in the range of 205-275° C (401-527° F).

avenia B61472.1 is slight color variations may occur with adhesives, depending on the raw materials and processes used. low-odor avenia hot-melt adhesive with medium setting time and very good oxidation stability in the melt, as well as good low-temperature flexibility. the avenia b61472.1 is suitable for painted and laminated surfaces, subject to individual testing. the raw materials used comply with fda guideline 175.105 for the outer packaging of food.