Products in CASE Ingredients: Calcium Salts

EXCAL® 325 processed from a high-purity buff colored limestone ore to exact specifications. Suitable for use in loss circulation drilling fluids, building materials and other industrial applications where lower economics are necessary.

CUMAR P-10 is a low molecular weight, liquid hydrocarbon tackifying resin produced by cata-lytic polymerization of predominantly indene and other aromatic monomers.

Shiraishi Kogyo Kaisha Homocal-D is a ultra-fine calcium carbonate which has 80 nm of particles as primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with vehicle or diluents. Homocal-D is commonly applied to paint application where high concentrate formulation is required. Homocal-D contributes to improve brushing feature at the painting, also contributes to create glossy but smooth paint surface. Homocal-D, at the blend use with TiO2, contributes to improve water resistance, better anti alkaline and anti-gasoline properties.

AKTISIL PF 777 is a SILLITIN Z 86 coated with alkyle silane.

The WhiteLite™ WL-32 Lightweight Mineral Powders are amorphous products obtained by the fusion of several inorganic substances mainly silica, alumina, boria, and sodium oxide, with minor amounts of calcia.

Calcit HydroPlex 95/78 is a natural, wet ground calcium carbonate. It is used as a coating pigment in the production of paper and board, improving their smoothness and glossiness.

Talc MP 40-27 is designed for use in interior and exterior architectural coatings as well as industrial primers and topcoats. Talc’s chemically inert nature improves the weatherability of coatings containing talc. The hydrophobic nature of talc contributes to the rheological properties (anti-sag, leveling, and brushability) and gloss of the coating as well as providing sheen control. In addition, the softness of talc reduces wear on processing equipment.

VERDOL D-400 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

Shanghai Tengmin Industry Barium Sulfate H10 is a white to fine powder, odorless and tasteless. Decomposes above 1600 ℃. Soluble in hot concentrated sulfuric acid, almost insoluble in water, ethanol and dilute acid. Barium sulfate has plate-like crystals, complete cleavage with close angle intersections, specific gravity 4.0-4.6 , foaming when exposed to hydrochloric acid cloth, strong chemical inertness, and good stability. Good barium sulfate has high reflectivity and can absorb harmful rays. , Is a kind of material with environmental protection function.

Ulmer Weiss 0,5-1,2 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 0.5-1.2 is similar to sand or gravel in appearance with a characteristic odor and grain size of 0.5-1.2. This product does not flash and is non flammable.

Geotex® 16-40 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. In applications needing high brightness material such as plaster and stuccos, Geotex has outstanding performance.

ASCOM 17 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

Talkron® NT 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® NT 10 is a magnesium hydrosilicate of lamellar structure, of high purity and lamellar structure, with a good grade of whiteness making it ideal for use in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 10µm

Hubercarb® Q2 is an ultra-fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, PVC pipe and profiles, rubber and plastics.

Juraperle 130 is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 130 is a solid powder in appearance with a characteristic odor and oil absorption of 10 g/100g.

Dolomite RF 240# is a double carbonate of Magnesium and Calcium (CaCO3. MgCO3) Theoretically, it contains 21.7 MgO and 30.4 % CaCO3 and the remaining being CO2. How ever in nature much variation takes place in the composition. It is sedimentary origin and is supposed to have been formed due to alteration of Calcium Carbonate sediments or rocks, by seawater rich in magnesia.

Geotex® 30-200 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. The controlled particle distribution allows G30-200 to be used as a texturizing agent, in plaster, EIFS, in abrasives, and PVC flooring.

Zetafil CST 3 is described on a very white, pure crystalline CaCO3. Zetafil CST 3 is coated by an organic agent which transforms the surface of the inorganic particles to an organic one, thus achieving full compatibility of the filler to an organic media. Due to its special particle size distribution, Zetafil CST3 is easily dispersed and can increase the % of fillers in the compound and coatings. Zetafil cst 3’s high brightness value assists the reduction of TiO2 in white compounds or coatings.

Sil-cell® 50 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

West System 410-7 Microlight, 5 oz is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan color. When West System® epoxy is thickened to a peanut butter consistency with Microlight™, the cured product sands and carves like basswood.

Guangzhou Hoten Chemical Barium Sulfate Modified HTM-A is a high precision innovative function filler of nanometer class, HTM is specially developed for electronic printing ink and writing ink industry. The use of complete and uniform film coating technology enables it to have highly efficient pigment dispersibility and to fully retain each pigment crystal grain around it and well distribute in resin and solvent so that the intrinsic hiding power and optical performance of each pigment crystal grain may be maximized to exhibit a purer color image and vividness. HTM further reduces its oil absorption by complete film coating treatment, thereby reducing the resign and solvent consumption in formulas. As a result, a better quick drying property is achieved and volatility be reduced.

ASCOM 25 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

VERDOL D-200 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

Hubercarb® M200 is a medium fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. The M200 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful

Calcite RF 240# is the most common form of natural calcium carbonate. Calcium carbonate minerals are the most important and abundant of all sedimentary rocks. It occurs in crystalline form in white color. It is many times associated with varying proportion of Magnesium Carbonate.

Hubercarb® M300 is an medium-fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. Carefully controlled particle distribution allows M300 to be used a wide range of applications including paints, coatings, adhesives, caulks, and concrete building products. Acid solubility above 92% and location make M300 ideal for use in oilfield drilling fluids.

Prakash Chemicals Calcium Octoate is an important auxiliary drier. It is used in combination with Lead and Cobalt octoate, mainly in alkyd finishes. Calcium Octoate prevents the formation of lead haze in clear medium.

ThermaFlex HRX(S) maintains superior delamination while providing an excellent balance of properties. Because their high purity, these micas maintain low abrasivity with elasticity and minimum attrition when exposed to the extreme mixing conditions of compounding and extrusion.

ADDAPT_x005F_x0001_ SILSTAB HL+ is a solvent free, Potassium Silicate solution optimized with a hydrophobic component for use in aqueous systems such as Renders (Putz), Textured Masonry Coatings and Interior Paints Stabilized Potassium Silicate solution with a hydrophobic component in water.

Nordkalk ENRICH C is an ultrafine precipitated calcium carbonate (PCC) product created to replace titanium dioxide and binder in paints and coatings. The multi-functional product innovation of Nordkalk Enrich has increasingly generated greater attention across the market, creating value in various fields of application in paints & coatings, adhesives, paper, inks and building materials.

Microblanc 3 is a very fine, extremely white and of high purity, crystalline Calcium Carbonate. The greatest advantage of Microblanc 3 is the re enforcement of the hiding power of paints, this is due to its unique particle size distribution.

Microcarb® designed to be used in the production of water based coatings and paints allow for matt to gloss finishes, offering a good balance between coverage, whiteness and stability (Low Binder Demand). In addition, ultrafine qualities allow for the reduced consumption of titanium dioxide and other expensive extenders like PCC and Aluminum silicate.

West System 404-B High-Density Adhesive Filler, 30 lb is an epoxy thickening additive. We developed it for maximum physical adhesive properties in hardware bonding, or anywhere that high-cyclic loads are anticipated. Blended with epoxy, it makes an excellent gap filler or structural filets. Use this filler wherever you need an especially strong bond. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.

Hubercarb® M6 is a fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. Carefully controlled particle distribution allows M6 to be used a wide range of applications including paints, coatings, adhesives, caulks, and oilfield drilling fluids.

Ulmer Weiss XM is a fine calcium carbonate powder with a yellow index of 7.6 that is designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, and polishing mixtures. Ulmer Weiss XM is a solid powder in appearance with a characteristic odor.

Ulmer Weiss 4-6 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 4-6 is similar to sand or gravel in appearance with a characteristic odor and grain size of 4.0-6.0. This product does not flash and is non flammable.