Products in CASE Ingredients: Calcium Salts

HALOX® 430 JM is a non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 JM is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

HALOX® 430 is a non-toxic, heavy metal-free anticorrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

HIFILL® 1 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 15 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 2 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® Air Floated Clay Filler 15 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® Air Floated Clay Filler 18 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 18 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 10 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 5 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® Air Floated Clay Filler 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 3 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

VANSIL® W-50 Wollastonite is the finest of the low aspect ratio grades of VANSIL (6+ Hegman fineness). This grade is suitable for liquid industrial and corrosion resistant coatings, powder coatings and semi-gloss architectural coatings. In powder coatings, this grade is desirable for smoother films and improved gloss. The naturally high pH of wollastonite helps to buffer latex paints and coatings, which contributes to improved corrosion resistance and weathering. This also extends in-can stability and prolongs the lifetime of the coating.

McNAMEE® Clay is a low cost air-floated kaolin reinforcer and inert filler. It is also used in crack fillers, caulking compounds, and elastomers.

VANSIL® W-30 Wollastonite is a medium fineness (4 Hegman fineness) low aspect ratio grade of wollastonite that can be used as a general-purpose mineral filler in a wide range of liquid coatings and powder coatings. It is used as a TiO2 spacer and extender. The naturally high pH of wollastonite helps to buffer latex paints and coatings, which contributes to improved corrosion resistance and weathering. This also extends in-can stability and prolongs the lifetime of the coating.

VANSIL® WG Wollastonite is a high aspect ratio, long needle grade of wollastonite. It is used principally as a mineral filler and reinforcing agent to enhance mechanical strength properties in high build coatings, texture paint, and block fillers. In high film build coatings, the needle-like shape of VANSIL WG improves mud crack resistance and sag resistance, while also contributing to peak retention in texture coatings. The naturally high pH of wollastonite helps to buffer latex paints and coatings, which contributes to improved corrosion resistance and weathering. This also extends in-can stability and prolongs the lifetime of the coating. In calcium silicate board and fiber cement, VANSIL WG increases flexural and compressive strength, reduces shrinkage, and reduces cracking. It is recommended that high aspect ratio grades of VANSIL be added late in process to avoid possible damage to the needle structure from high shear mixing.

VANSIL® W-40 Wollastonite is a fine particle (5 Hegman fineness) low aspect ratio grade of wollastonite that can be used as a general-purpose mineral filler in a wide range of paint and coatings. It is used as a TiO2 spacer and extender. The naturally high pH of wollastonite helps to buffer latex paints and coatings, which contributes to improved corrosion resistance and weathering. This also extends in-can stability and prolongs the lifetime of the coating.

VANSIL® W-20 Wollastonite is a relatively coarse (1 Hegman fineness) low aspect ratio grade of wollastonite that can be used as a general purpose extender pigment where ultra-fineness is not required such as texture paints and block fillers. The naturally high pH of wollastonite helps to buffer latex paints and coatings, which contributes to improved corrosion resistance and weathering. This also extends in-can stability and prolongs the lifetime of the coating.

BILT-PLATES® 156 Filler is a fine particle size (4 Hegman fineness) air-floated kaolin clay. It is used as a reinforcing filler in all types of coatings, adhesives, elastomers and latexes. It can be used as a TiO2 spacer in coatings that do not require a high brightness filler.

Acti-Min® PG is a carefully produced, high quality, kaolin clay designed for the paint industry. It is also well suited to adhesives, sealants, and white rubber applications. Strict attention to the clay source and to process control assures a consistently high brightness and suitable particle size for the use in the contractor-grade paints. The naturally fine particle size of Acti-Min® PG keeps the +325 Mesh low and has a higher percentage of particles less than 0.5 microns compared to coarser clays. This size distribution allows the paint formulator to maximize the hiding power of titanium dioxide (TiO2), while reducing overall formulation cost.

HeBoFill® LL-SP 120 is a Boron Nitride powder of high purity. Its high crystallinity results in excellent lubrication. The powder is also characterised by a narrow grain size distribution. The high crystallinity results in a relatively low specific surface area. This property enables a low increase in viscosity at high filler loadings.

Nanoflake™ ECR GLASSFLAKE UNMILLED GF750nm by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace. It is available in Flakes form.

Coarse kaolin, milled powder, with the lowest oil absorption, for extending without thickening.

ECR GLASSFLAKE™ UNMILLED GF500 by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace. It is available in Flakes form.

Nanoflake™ ECR GLASSFLAKE UNMILLED GF850nm by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace. It is available in Flakes form.

HeBoFill® BL-PC 060 is a technical recycling quality which is produced during the machining of sintered boron nitride components. Composition and particle size distribution are adjusted by means of targeted processing. Due to the raw materials used, this powder also contains admixtures of valuable refractory zirconium and silicon compounds. Boron nitride is resistant up to 900°C in air and up to 2000°C under vacuum/inert conditions.

Glazex 5 HB kaolin is an ultra-fine particle-size grade that contains high brightness.

ECR GLASSFLAKE™ UNMILLED GF200 by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace. It is available in Flakes form.

AMSil™ 668 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Nanoflake™ ECR Glassflake MICRONISED GF005 by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace. It is available in Flakes form.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Nanoflake™ ECR GLASSFLAKE MICRONISED GF005-20 by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace. It is available in Flakes form.

OceanCal™ 8U Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High brightness. High microporosity. High chemical purity. Offered in a range of controlled particle sizes. Approved for use in organic production in accordance with the USDA National Organic Standards. Can be offered with stearic acid surface treatment (please see "OceanCal 8S" product). Applications include, but are not limited to: agriculture, paints, coatings, adhesives, sealants, PVC, plastics, rubber, pharmaceuticals, nutraceuticals, cosmetics, and water treatment.