Products in CASE Ingredients: Esters

AltroColor PAS 7000 Color Pastes are based on a polyaspartic ester and have been developed particularly for the coloring of polyaspartics. As our AltroColor PAS 7000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyaspartics is ensured. The AltroColor Color Pastes thus have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PAS 7013 is green colored.

SYLVALITE RE 80HP rosin ester is a low odor, light-colored ester of Tall Oil Rosin that has been stabilized to provide excellent performance and aging properties. The stability and polymer compatibility of this tackifier make it useful in a wide variety of adhesives, especially PSAs.

Kanatol 4M (DBM) is clear, colorless and almost odorless liquid. also used in co-monomers such as the vinyl acetate, vinyl chloride, vinylidene chloride and so on, having the effect of increasing the bindability and internal plasticization; also can be used as the plasticizer of the PVC resin and methacrylic acid resins; as the solvent, it can be used for prepareing the chromophotograph emulsion and special type ink, etc.; it also can be used as the gelation accelerator, adhesive, vapor-phase chromatography fixing solution, anticorrosive additive, insecticide, bactericide and surfactant.

Cationic wetting and dispersing additive to improve the wetting of pigment surfaces especially carbon black and organically treated Bentonites

US Polymers - Accurez LLC Epi-Tex 611-S is VOC compliant latex modifier which imparts epoxy characteristics to latex coatings and provides the best possible penetration into concrete. The polymer is typically used 20% on resin solids as a modifier to add epoxy fortification to a latex top coat, improves the adhesion to concrete, provides efflorescence resistance and upgrades chemical resistance.

FCABA 2 is a blend of silicone and organic acid esters. Designed for use in most non aqueous based coating systems, adhesives and inks. Prevents bubbles, and foam in flow coat, curtain coater, dip, roller coater, conventional and airless spray applications.

Kanatol 9M (DINM) is clear, colorless oily liquid with characteristic ''ester'' odor, It is not miscible with water but soluble in organic solvents. K-9M is an unsaturated reactive este.r It readily copolymerizes with vinyl acetate, vinyl chloride, acrylates ant styrene. The Size of the DOM molecule reduces crystallinity and provide permanent internal plasticization.

ANTIOX ASX is a synergistic blend of three non-staining antioxidants, including a primary phenolic stabilizer, a thio-ester for the long term stability, and finally a phosphite, for the high temperature protection.

Kanatol DGB (DEGDB) a glycol benzoate ester, is a clear liquid with chemically stable properties and high boiling point. It is slight soluble in water and very soluble in polymers.

West Tech Chemical Ltd WR 3095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.

Protex 70100 is Glycerol Modifyed Rosin Ester for hot melt road marking

LUREFOR 125 is a pentaester ester of stabilized resin acids

EcoPrint® 5002 is a phenolic modified rosin ester. It is specially manufactured to be used in heatset and sheetfed.

RESIESTER T 3 is a Triethylene glycol ester of stabilizedgum resin

Tributyl phosphate (TBP) is soluble in ethanol and other common organic solvents, and slightly soluble in water. The solubility of water in this product is 7% (25°C). But as the temperature rises, it will gradually hydrolyze. It is widely used as a plasticizer for nitrocellulose, cellulose acetate, chlorinated rubber, and polyvinyl chloride; as a solvent, defoamer and antistatic agent for coatings, adhesives, and inks; it can also be used as a rare Metal extractant. However, this product has low boiling point and large volatilization loss, and its application in plasticizers is relatively limited.

AQUATAC 6085 resin dispersion is an unique rosin ester dispersion for use in waterborne pressure sensitive adhesives. Formulations with AQUATAC 6085 will have aggressive tack and peel, as well as excellent shear properties.

SYLVATAC RE 95 rosin ester provides broad polymer compatibility and excellent adhesive performance. This rosin ester improves the functional performance and value-in-use of woodworking, packaging and pressure sensitive adhesives.

TERGUM 42 is a liquid rosin triethylglycol ester, to be added to water based adhesive or to hot-melt formulations in order to increase tack properties.

EcoPrint® 5005 is a phenolic modified rosin ester.

SYLVALITE ENDURA 99 rosin ester is an ester of stabilized Tall Oil Rosin. This innovative, light colored product has been formulated to provide excellent resistance to oxidation. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives, it provides notably improved color stability as compared to other tackifiers.

ADDAPTOL™ DB is a non-VOC oxygenated solvent for use as a coalescing agent in waterborne systems and tail solvent in Solvent borne systems. It is a proprietary mixture of branched esters of dibasic acids.