Products in CASE Ingredients: 2K (2 component) Coating

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.

ELASTOSIL® LR 6200 A/B is a liquid silicone rubber (LSR) that is solvent-free and free-flowing. It utilizes additive curing and consists of two components. This grade is specifically designed for textile coatings. ELASTOSIL® LR 6200 A/B has a very low viscosity, allowing for good penetration into the substrate and a dry surface touch. It is particularly well suited for textile coating applications that require enhanced flame retardancy.

DEHESIVE® 955 is a solvent-based, addition-crosslinkable, two-component silicone system recommended for release coatings. It offers excellent release stability, excellent anchorage to polyester films, and a good bath life. DEHESIVE® 955 can be used for coating PE-laminated paper, polyester films (PET), and papers.

ELASTOSIL® LR 6240 A/B is a solvent-free, free-flowing, addition-curing two-component silicone rubber for textile coatings (e.g. electrical sleevings). This low-viscosity compound is used to produce flexible textile coatings. It is especially suitable for the manufacture of conveyor belts and electrical insulation tubing.

VINNOL® H 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It is primarily employed as a binder in surface coating compounds and printing inks. VINNOL® H 15/45 M functions as a thermoplastic, physically drying binder that undergoes film formation as the solvent within the formulation evaporates.

SILRES® MSE 100 is the methyl ester of a mixture of different oligomeric methylsilicates. It is a methoxyfunctional methyl polysiloxane. SILRES® MSE 100 is specifically recommended as an ambient-temperature moisture-curing binder for heat-resistant paints. When combined with suitable catalysts, temperature-stable pigments, and fillers, SILRES® MSE 100 becomes the optimal binder for ambient-curing, heat-resistant paints.

ELASTOSIL® LR 6260 A/B is a solvent-free, free-flowing, addition-curing two-component silicone rubber for textile coatings (e.g. electrical sleevings). It is a liquid silicone rubber with low viscosity used to produce textile coatings. It is especially well suited for the manufacturing of electrical sleeves.

VINNOL® E 18/38 is a copolymer consisting of approximately 82 wt.% vinyl chloride (VC) and 18 wt.% vinyl acetate (VAc). It is primarily utilized as a binder in printing inks and surface coating compounds. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

WACKER® Silicate TES 28 is a monomeric ethyl silicate, also known as tetraethoxysilane or tetraethyl orthosilicate. It is a colorless, low-viscosity liquid with an SiO2 content of approximately 28 wt.%. This product is commonly used in the formulation of anti-corrosive coatings, marine and protective coatings, as well as industrial coatings.

ELASTOSIL® LR 6250 F Transparent is a solvent-free, free-flowing liquid silicone rubber designed for textile coatings. It undergoes additive curing and is specifically formulated for coating applications in the textile industry. This product features low viscosity, making it suitable for a wide range of general-purpose coating applications. Additionally, it offers a long pot life for ready-to-use mixtures.

VINNOL® E 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It functions primarily as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNOL® E 15/45 is a copolymer composed of approximately 85 wt.% vinyl chloride (VC) and 15 wt.% vinyl acetate (VAc). It serves as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

KOSMOS® MB 16 is a catalyst composed of bismuth carboxylate. It finds applications in the production of 2K polyurethane elastomers, sealants, coatings, or adhesives. Compared to DABCO® MB 20, KOSMOS® MB 16 exhibits reduced sensitivity to residual moisture, resulting in shorter gel times and tack-free times. Additionally, it offers improved curing times and has a lower viscosity compared to standard bismuth grades.

VERSALINK® 740 M is a high-performance diamine curative designed for mixed isomer liquid polyurethane prepolymers. It has also demonstrated its effectiveness as a curative for epoxy resins. This versatile product finds applications in a wide range of industries, including coatings, adhesives, sealants, and elastomers.

VERSALINK® P 250 is an oligomeric diamine curative that exists as a waxy solid at room temperature. It can be easily mixed, cast, and cured at ambient temperatures. This product serves as a curative for different diisocyanates and their prepolymers. Furthermore, it can function as a modifier for amine or anhydride-cured epoxies, enhancing their flexibility.

VERSALINK® P 650 is a liquid oligomeric diamine curative that remains in liquid form at room temperature. It can be easily mixed, cast, and cured at ambient temperatures. This product serves as a curative for different diisocyanates and their prepolymers. Additionally, it can be used as a modifier for amine or anhydride-cured epoxies, enhancing their flexibility.

VINNAPAS® 550 ED is a multi-purpose construction dispersion, specifically suited for cement admixtures, the formulation of two-component cementitious waterproofing membranes, as well as the production of primers. The dispersion is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® ED, which means that it enhances the adhesion and flexibility of mortars.

SILRES® HP 2020 is a low-viscosity, reactive aminofunctional methyl phenyl silicone resin. The product is typically used as a curing agent or crosslinker for cycloaliphatic epoxy resins in 2-pack high-solids coatings. It significantly improves the weathering resistance of the coating compared to organic amine curing agents. Such 2-pack epoxypolysiloxane coatings are an isocyanate-free alternative to 2-pack polyurethanes as weathering-resistant topcoats.

VINNOL® E 22/48 A is a copolymer composed of approximately 75 wt.% vinyl chloride (VC) and 25 wt.% carbon acid esters with hydroxyl functionality. It serves as a binder for surface coating compounds and printing inks. As a thermoplastic and physically drying binder, VINNOL® E 22/48 A undergoes film formation as the solvent within the formulation evaporates.

VINNOL® E 15/48 A is a hydroxyl-containing copolymer composed of approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. It serves as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNOL® E 15/40 A is a hydroxyl-containing copolymer comprising approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. Its primary application lies in serving as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNAPAS® 754 ED is a construction dispersion for two-component dry mix mortars, specifically suited for cement admixtures and two-component cementitious waterproofing membranes. VINNAPAS® 754 ED belongs to the product class VINNAPAS® ED. It is based on a highly flexible terpolymer of vinyl acetate, ethylene, and vinyl ester, enhancing the adhesion and flexibility of mortars.

SILRES® HP 2000 is a reactive aminofunctional methyl phenyl silicone resin supplied as an approximately 90 wt.% solution in xylene. The product is typically used as a curing agent or crosslinker for cycloaliphatic epoxy resins in 2-pack high-solids coatings. It significantly improves the weathering resistance of the coating compared to organic amine curing agents. Such 2-pack epoxypolysiloxane coatings are an isocyanate-free alternative to 2K-polyurethanes as weathering-resistant topcoats.

VINNAPAS® 760 ED is a construction dispersion for two-component dry mix mortars, specifically suited for cement admixtures and two-component cementitious waterproofing membranes. VINNAPAS® 760 ED belongs to the product class VINNAPAS® ED. It is based on a highly flexible terpolymer of vinyl acetate, ethylene, and vinyl ester, enhancing the adhesion and flexibility of mortars.

HALOX® 520 is a liquid organic corrosion inhibitor primarily designed for use in water-borne coating systems. It contains dual functionality as a corrosion inhibitor and an adhesion promoter. HALOX® 520 may be used in waterborne formulations such as 2 pack epoxy systems, 1 and 2 pack polyurethanes, acrylics (especially epoxy/amine-functionalized), and hybrid systems. It may also be used as a metal pretreatment additive.

HALOX® CW-314 is a heavy metal-free, non-toxic, anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is particularly suitable for systems where 21 CFR 175.300 approval or compliance with ANSI or NSF standards is required. HALOX® CW-314 is highly effective in improving the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It enhances the total solar reflectance (TSR) while maintaining dirt pick-up resistance (DPUR) and preventing mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints.

HALOX® CW-491 is a white, non-refractive, heavy metal-free pigment used as a corrosion inhibitor in protective coating systems. It is versatile and can be used with a variety of solvent and waterborne resin systems. The recommended loading levels for HALOX® CW-491 vary depending on the type of system used. For waterborne systems, the recommended loading levels range from 5–8% based on the total formula weight, while for solventborne systems, the recommended loading levels range from 7–12% based on the total formula weight.

HALOX® Z-PLEX 111 is a corrosion-inhibiting pigment used in protective coating systems that is highly versatile and more cost-effective than commercial zinc phosphate. HALOX® Z-PLEX 111 can provide a higher level of corrosion protection than commercial zinc phosphate when used as an equal-weight replacement.

HALOX® 570 is an organic corrosion inhibitor designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. HALOX® 570 is especially effective along weld seams and, in some cases, can also be used in solvent-based coatings and UV-cured systems. HALOX® 570 may be used in formulations based on waterborne acrylic latexes and co-polymers, styrene/acrylic latexes, acrylate epoxy esters, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2-pack polyurethane. HALOX® 570 may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 has a minimal effect on gloss reduction.

HALOX® CZ-170 is a versatile pigment used in protective coating systems to inhibit corrosion and tannin staining. It is a great replacement for zinc oxide and can be used in high-gloss and thin-film applications due to its finer particle size and narrow distribution. With a gloss of over 75 units at 60° and a film thickness of less than 1.0 mils, or 25 microns, HALOX® CZ-170 is a great option for a variety of coating needs. It can be used to protect both metal and wood substrates, making it a universal option for coating systems.

HALOX® 350 is a highly active organic corrosion inhibitor with 97–100% solids, specifically designed to prevent flash rust and in-can corrosion while also providing temporary corrosion protection. This product is an effective alternative to toxic nitrite-based flash rust inhibitors. It is in the form of a slightly yellow powder.

HALOX® 630 is a liquid organic corrosion inhibitor for solvent-borne protective coatings on metal surfaces. It may be used in solventborne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high-solids epoxy esters, alkyds, acrylic resins, and 2 pack polyurethane primers. However, in bake systems, the temperature should not exceed 150°C. It should be noted that yellowing may be observed with reactive isocyanates. HALOX® 630 provides superior corrosion resistance even over poorly prepared surfaces, such as adherent rust or oil contamination.

HALOX® 430 JM is a non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 JM is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

Dragonsorb® 5151 is a mixture of benzotriazole UVA with HALS light stabilizer. This liquid light stabilizer blend is developed specifically for coatings. Its high thermal stability and permanence make it suitable for coatings exposed to high bake temperatures and/or extreme environmental conditions. Its broad UV absorbance allows effective protection of light-sensitive substrates such as wood and plastics.

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor, HALOX® 570, which requires no dilution. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both water-based primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 LS has a minimal effect on gloss reduction.