Products in Monomers & Intermediates

VISIOMER® HEMA-P 70 M is a monofunctional methacrylate with a phosphate group in the side chain. It is supplied in 30% methyl methacrylate, which gives it a low viscosity and makes it easy to handle. This monomer provides superior adhesion to polar surfaces such as metals, glass, ceramics, and concrete. In direct-to-metal coatings, it enhances corrosion resistance and improves film strength. Visiomer® HEMA-P 70M can be used as a functional co-monomer in acrylic emulsions for coating resins, as well as an adhesion promoter in adhesive formulations.

VISIOMER® MEEU 50 W is a water-based solution containing 50% ureido methacrylate. This product is specifically formulated to enhance the wet adhesion properties of emulsion polymers and improve the wet scrub resistance of the final products. It finds applications in industries such as adhesives and sealants, coatings, and textile and leather. By incorporating VISIOMER® MEEU 50 W into formulations, manufacturers can achieve improved performance and durability in their products, particularly in wet conditions.

VISIOMER® MPEG 5005 MA W is a highly polar monomer with excellent water solubility. It consists of methoxy polyethylene glycol 5000 methacrylate, with a concentration of 50% in water. This monomer finds applications in various industries including coatings, adhesives, composites, construction, plastics, textiles, leather, oil & gas, paper, water, personal care, health care, and synthesis.

VISIOMER® TRGDMA (triethylene glycol dimethacrylate) is a dimethacrylate monomer with low viscosity, making it well-suited for use as a crosslinking agent in free radical polymerization. Additionally, it serves as an adhesion promoter and hardener for PVC plastisols, as well as a component in reactive resins. This versatile compound finds applications in a wide range of industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.

VISIOMER® c-HMA (Cyclohexyl methacrylate) is a cycloaliphatic monomer characterized by its low viscosity. It serves as a fundamental component in the formulation of polymers that exhibit excellent weathering resistance and chemical resistance. This monomer is widely utilized in industries such as adhesives, sealants, coatings, and composites to enhance the performance and durability of the resulting products. By incorporating VISIOMER® c-HMA, manufacturers can develop polymers with superior resistance to environmental factors and various chemicals, ensuring long-lasting and reliable applications in diverse settings.

VISIOMER® MAPTAC (3-Trimethylammoniumpropyl methacrylamide chloride - aqueous solution-) is a quaternized aminofunctional monomer specifically designed for the preparation of water-soluble cationic polymers. It finds applications in various industries including adhesives and sealants, oil and gas, paper, personal care, pharmaceuticals, and healthcare. By utilizing VISIOMER® MAPTAC, water-soluble cationic polymers can be synthesized, offering advantages such as enhanced adhesion, and flocculation. This versatile monomer contributes to the development of innovative products in a wide range of applications.

T-Mulz® HP is the phosphate ester of 2-hydroxyethyl methacrylate. It is a reactive monomer that copolymerizes with a wide variety of monomer systems. This product is inhibited with 400 ppm of hydroquinone. It is used to improve latex stability, promote polymer adhesion to various metal substrates, improve film tensile strength, impart antistatic properties to polymers, and improve corrosion resistance.

Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization and it is inhibited with 400ppm of added hydroquinone.

Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethyl methacrylate). It is predominantly composed of the monoalkyl phosphate ester, making it easy to incorporate into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. In addition, it is inhibited by the addition of 400 ppm hydroquinone.

Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems, and its polarity provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings, and it is inhibited with 100ppm of added MeHQ.

NORYL™ SA110A resin is a low molecular weight polymer based on polyphenylene ether (PPE). Miscibility of NORYL SA110A resin in polystyrene may allow use as a styrene endblock reinforcing resin in a variety of materials like styrene-based rubbers and styrene block copolymers. Adding NORYL SA110A resin to these systems may improve heat resistance (adhesion at elevated temperatures) while maintaining peel strength. The viscosity profile of NORYL SA110A resin makes it a good potential candidate for melt extrusion tape processes.

NORYL™ AP2001G polyol is a low molecular weight di-functional hydroxyl-terminated polyol based on polyphenylene ether (PPE). The incorporation of NORYL AP2001G polyol into a solid elastomer matrix may demonstrate structure-property benefits in traditional CAST polyurethane material formulations. Incorporating NORYL AP2001G polyol into these systems may: - Improve toughness and reduce abrasion - Increase tensile strength - Improve strain modulus and elongation - Maintain physical properties at elevated temperatures and after humid aging - Improve resistance to alkaline, acid, water and oil - Improve adhesion to steel This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Naxol® cyclohexanol is a versatile solvent and intermediate suitable for use in and/or production of agricultural and CASE (Coatings Adhesives Sealants and Elastomers) products, rubbers, plasticizers, and fragrance compounds. Naxol® cyclohexanol offers low toxicity and is produced to low moisture standards. Naxol® cyclohexanol may be used to provide extra freeze protection at temperatures as low as -5°C (23°C). High purity Naxol® cyclohexanol is used in the Building & Construction market for infrastructure, roads and paving applications. Also, high purity Naxol® cyclohexanol is used in the Electrical & Electronics market for the production of printed circuit boards and other semiconductor manufacturing applications. Additionally, high purity Naxol® cyclohexanol is used in the Home & Personal Care market as a solvent for fragrance compound.

BioPTMG 2000 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 2000 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

BioPTMG 3000 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 3000 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

BioPTMG 650 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 650 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

BioPTMG 1000 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 1000 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

WACKER® L 655 is a crosslinking aminoalkyl functional polydimethylsiloxane. Unlike conventional polydimethylsiloxanes in the WACKER® AK series, WACKER® L 655 demonstrates exceptional affinity to various surfaces. When exposed to atmospheric humidity or reactive polish actives like acid waxes, WACKER® L 655 undergoes crosslinking, resulting in the formation of a stable and insoluble polymer film. This film exhibits outstanding substrate affinity and resistance to detergents.

2 - Phenyl 3,3' Bis (4-Hydroxy Phenyl) Phthalimide: SABIC PPPBP-1000 is available globally and at commercial scale. With a unique property profile, including reactivity, chemical functionality and high purity, potential uses include building blocks for epoxies and other phenolic chemistries. Compared to other common bisphenols, it can significantly enhance glass transition temperatures and lower shrinkage.

SILRES® SY 300 is a reactive, silanol-functional phenyl-propyl polysiloxane that serves as a solventless solid resin for modifying organic resins. It is specifically recommended for the production of air-drying silicone alkyds that comply with U.S. Federal Specifications TT-E-490 E/3 and TT-E-1593B.

WACKER® Crosslinker V 88 is a solvent-free hydrogenpolysiloxane that contains reactive Si-H groups. This crosslinker is renowned for its fast curing properties, good release stability, and excellent anchorage to various substrates. It is specifically used for curing crosslinking solvent-based and solvent-free DEHESIVE®-systems. It offers fast curing, good release stability, and excellent anchorage on a wide variety of substrates.

WACKER® Crosslinker V 24 is a solvent-free hydrogenpolysiloxane that contains reactive Si-H groups. It offers a good cure, ensuring the effective curing of coatings. This crosslinker provides low release properties, making it suitable for applications where minimal release is desired. It also exhibits good release stability, maintaining its performance over time. Additionally, WACKER® Crosslinker V 24 demonstrates excellent anchorage to paper and film substrates.

WACKER® Crosslinker NM 25 is a clear to light yellow liquid crosslinker that contains no MEKO (methyl ethyl ketoxime). This product undergoes rapid hydrolysis upon exposure to moisture. It is commonly used as the primary crosslinker in oxime silicone sealants with no MEKO content.

WACKER® Crosslinker V 68 is an emulsified hydrogenpolysiloxane that contains reactive Si-H groups. This product is specifically designed as a part of an emulsion-release coating system for a variety of substrates. Its superior curing properties enable low platinum formulations, resulting in cost efficiency. The formulation of this crosslinker allows for easy mixing and metering, facilitating the manufacturing process. Additionally, it provides good release stability.

SILRES® HP 2020 is a low-viscosity, reactive aminofunctional methyl phenyl silicone resin. The product is typically used as a curing agent or crosslinker for cycloaliphatic epoxy resins in 2-pack high-solids coatings. It significantly improves the weathering resistance of the coating compared to organic amine curing agents. Such 2-pack epoxypolysiloxane coatings are an isocyanate-free alternative to 2-pack polyurethanes as weathering-resistant topcoats.

WACKER® L 653 is an aminoalkyl functional polydimethylsiloxane. Unlike other curable amino silicone fluids, it offers improved storage stability both in its pure form and in ready-to-use formulations. WACKER® L 653 finds application in paint conditioners and paint polishes, delivering enhanced gloss and detergent resistance. Compared to conventional polydimethylsiloxanes like the WACKER® AK series, the aminoalkyl functional WACKER® L 653 demonstrates excellent affinity to a variety of substrates, ensuring long-lasting gloss and color depth.

WACKER® eco Crosslinker V 90 is a solvent-free hydrogenpolysiloxane that contains reactive Si-H groups. This product is formulated using renewable raw materials in accordance with the "Standard REDcert²." It offers fast curing, good release stability, and excellent anchorage on a wide variety of substrates. The fast-curing properties of WACKER® eco Crosslinker V 90 allow for a low platinum concentration requirement.

WACKER® Crosslinker ME 63 is a blend of alkoxysilane and aminofunctional siloxane, presenting as a colorless to yellow liquid that can be clear or slightly turbid. It demonstrates partial miscibility with water, and upon contact with water or moisture, it undergoes decomposition, resulting in the formation of methanol and a silicone resin. WACKER® Crosslinker ME 63 finds application as a crucial component in the manufacturing of alkoxy-cured RTV-1 silicone rubbers.

WACKER® Crosslinker ES 23 is a colorless to yellow liquid that is not miscible with water. When exposed to water or moisture, it decomposes and forms acetic acid. WACKER® Crosslinker ES 23 is utilized as a raw material for acetoxy crosslinking RTV-1 silicone rubbers.

Wacker Chemie 3,5-Dimethylpyrazole (3,5-DMP) is a heterocyclic compound. It is a white solid with a pleasant odor. Also known as 3,5-dimethyl-1H-pyrazole, it is used as a reagent for blocking isocyanates in the paint industry. It serves as a building block for the synthesis of organic fine chemicals.

WACKER® Elastomer 6 N is a clear, colorless polydimethylsiloxane fluid that features silanole groups in the α,ω-position. This functionalization of the polydimethylsiloxane chains results in products with a functionality of 2. The silanole groups in WACKER® Elastomer 6 N enable it to undergo condensation reactions with itself or with functional silanes. Additionally, these silicone fluids can react with fluids containing Si-H groups, leading to the evolution of hydrogen. OH-terminated fluids are available in a wide range of viscosities to suit different application requirements.

SILRES® HP 2000 is a reactive aminofunctional methyl phenyl silicone resin supplied as an approximately 90 wt.% solution in xylene. The product is typically used as a curing agent or crosslinker for cycloaliphatic epoxy resins in 2-pack high-solids coatings. It significantly improves the weathering resistance of the coating compared to organic amine curing agents. Such 2-pack epoxypolysiloxane coatings are an isocyanate-free alternative to 2K-polyurethanes as weathering-resistant topcoats.