Products in Monomers

Deltech Vinyl Toluene (VT) is a mixture of methylstyrene isomers, with approximately 55% meta and 45% para isomer distribution. This reactive monomer readily polymerizes to form a high-clarity, colorless polymer with excellent electrical and physical properties. In many applications, VT demonstrates superior properties compared to styrene monomer.

VISIOMER® PEG 8000 DMA W (polyethylene glycol 8000 dimethacrylate) is a long-chain hydrophilic crosslinking monomer. It is commonly utilized as a co-monomer in formulations for joint sealants, specifically to seal construction gaps in concrete slabs, decks, and similar structures. This particular compound finds applications in the adhesives and sealants, coatings, and construction industries.

VISIOMER® Terra C17,4-MA (methacrylic ester 17.4) is a methacrylate monomer with a long alkyl chain, resulting in a low glass transition temperature (Tg). This monomer is commonly used to enhance the hydrophobicity of resins, making them more resistant to water and other polar substances. In addition to its role as a hydrophobicity enhancer, VISIOMER® Terra C17,4-MA is also employed as a flexibilizer and internal plasticizer in coatings and reactive resins applications. By incorporating this monomer into formulations, manufacturers can achieve improved flexibility and enhanced performance of their coatings and reactive resins.

VISIOMER® MPEG 750 MA W is a highly polar monomer with excellent water solubility. It is composed of methoxy polyethylene glycol 750 methacrylate, with a concentration of 50% in water. This monomer is commonly used as a co-polymerizable emulsifier to stabilize latex polymer systems, particularly emulsions. Industries such as coatings, oil and gas, personal care, and pharma and healthcare can benefit from its properties.

VISIOMER® ETMA (ethyltriglycol methacrylate) is a hydrophilic methacrylate monomer known for its ability to enhance adhesion, flexibility, and minimize shrinkage in polymers. It exhibits low volatility and serves as a reactive diluent in reactive systems. This versatile compound finds applications in industries such as adhesives and sealants, as well as coatings.

VISIOMER® Terra IBOMA is a bulky side-chain alkyl methacrylate monomer known for its exceptionally high glass transition temperature (Tg). It offers the advantage of lowering viscosity in polymers, enabling the formulation of high solids content. This monomer finds applications in various industries, including adhesives and sealants, coatings, and composites.

VISIOMER® N-MMAA is a versatile bifunctional monomer that possesses both vinyl and hydroxymethyl groups. This monomer finds applications in various industries, including papermaking, textiles, and non-wovens, where it is utilized in adhesives, binders, and coatings resins. Additionally, VISIOMER® N-MMAA is used in the production of surface coatings, varnishes, films, and sizing, providing a wide range of possibilities for enhancing materials and creating resilient resins.

VISIOMER® GDMA (1,3-glycerol dimethacrylate) is a hydrophilic dimethacrylate monomer specifically utilized as a crosslinker in adhesive and sealant formulations. It offers efficient adhesion properties, thanks to its additional OH functionality. This versatile monomer finds applications in the adhesives and sealants, as well as coatings industry.

VISIOMER® IDMA (Isodecyl methacrylate) is a hydrophobic monomer known for its low shrinkage and low glass transition temperature (Tg). It exhibits excellent dilution power, resulting in low viscosity when used in polymer formulations. The low Tg of IDMA imparts extreme softness to the resulting polymers. This versatile monomer finds applications in various industries including adhesives and sealants, coatings, oil and gas, personal care, healthcare, and textile and leather.

VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer widely used as a crosslinker. It serves as an excellent replacement for styrene in composite resin, functioning as an adhesion promoter and a hardener for PVC plastisols. Additionally, it acts as a coagent for peroxide crosslinking of elastomers. This versatile compound finds applications in industries such as adhesives and sealants, composites, construction, and plastics and rubber.

VISIOMER® IBOA (isobornyl acrylate) is a monofunctional acrylate monomer known for its good reactivity and high glass transition temperature. It finds application in the reduction of viscosity within UV/EB curing formulations. This versatile compound is widely employed in the adhesives and sealants industry.

VISIOMER® MPEG 500 MA is a pure and water-free methoxy polyethylene glycol methacrylate monomer, available in liquid form for easy handling. It is soluble in water and consists of approximately 12 ethylene oxide (EO) units in its chain. Industries such as coatings, healthcare, and personal care can utilize this monomer for various applications.

VISIOMER® 1,6-HDDMA (1,6-hexanediol dimethacrylate) is a hydrophobic dimethacrylate monomer highly suitable as a crosslinker for reactive systems. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, as well as plastics and rubber.

VISIOMER® MEEU 25 M is an ureido methacrylate solution containing 25% ureido methacrylate in MMA (methyl methacrylate). It is specifically designed for enhancing wet adhesion and wet scrub resistance in various polymer applications. This versatile product finds utility in industries such as adhesives and sealants, coatings, as well as textile and leather. VISIOMER® MEEU 25 M provides improved performance in terms of adhesion and durability, making it a valuable additive for achieving high-quality results in polymer formulations.

VISIOMER® PEG 200 DMA (polyethylene glycol 200 dimethacrylate) is an aliphatic dimethacrylate monomer with low viscosity, making it an excellent choice as a co-monomer to enhance the mechanical properties and chemical resistance of resins. This label-free monomer finds applications in a variety of industries, including 3D printing, adhesives and sealants, coatings, composites, construction and, personal care.

VISIOMER® MAAH is a highly reactive material that is well-suited for the production of specialty monomers. It finds application in the synthesis of intermediates for various industries. With its exceptional reactivity, VISIOMER® MAAH serves as a valuable component in the manufacturing process, enabling the creation of specialized monomers tailored to specific industrial needs.

VISIOMER® EGDMA (ethylene glycol dimethacrylate) is a hydrophilic dimethacrylate monomer renowned for its low viscosity. It is an excellent choice as a crosslinking agent, effectively enhancing the resistance properties of polymers and elastomers. This versatile compound finds applications in various industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.

VISIOMER® MADAME is a monofunctional methacrylate with a tertiary amino group in the side chain. It is an ideal ingredient for improving the adhesion of formulations. This monomer is widely used in the preparation of cationic polymers, particularly quaternary ammonium polymers and flocculants. Industries such as coatings, oil and gas, paper, and personal care can benefit from the unique properties of VISIOMER® MADAME.

VISIOMER® TMPTMA (trimethylol propane trimethacrylate) is a trifunctional methacrylate monomer renowned for its ability to serve as a crosslinking agent. It imparts cohesive strength and high temperature resistance to polymers and elastomers by forming dense networks. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, construction, as well as plastics and rubber.

VISIOMER® Terra C13-MA (methacrylic ester 13.0) is a specialty monomer that offers enhanced water repellency and improved resistance against polar solvents. It is commonly employed to increase the hydrophobicity of resins, making them more resistant to water and other polar substances. This particular monomer is derived from raw materials obtained from natural oils, highlighting its environmentally friendly nature. VISIOMER® Terra C13-MA finds applications in various industries including adhesives and sealants, coatings, construction, oil and gas, paper, personal care, and healthcare.

VISIOMER® C18 PEG 1105 MA W is a polar methacrylate monomer in water and GMAA, consisting of a hydrophilic polyethylene glycol side chain with a C16-C18 hydrophobic tail. This monomer is well-suited for use as an associative polymeric thickener in emulsion polymers. Industries such as coatings, healthcare, oil and gas, paper, personal care, and water treatment can benefit from its properties.

VISIOMER® EHMA (2-Ethylhexyl methacrylate) is a hydrophobic monomer with a low glass transition temperature (Tg), minimal shrinkage, and low viscosity. This monomer offers flexibility and exhibits excellent dilution and solvency power. It is widely used in the production of various polymers for diverse applications across industries such as adhesives and sealants, coatings, oil and gas, personal care, and healthcare. Its unique properties make it a valuable component in the formulation of materials that require flexibility, low shrinkage, and efficient solvency capabilities.

VISIOMER® MPEG 1005 MA W is a highly polar monomer with excellent water solubility. It consists of methoxy polyethylene glycol 1000 methacrylate, with a concentration of 50% in water. This monomer finds applications in industries such as construction, oil and gas, and personal care.

VISIOMER® BDGMA (butyl diglycol methacrylate) is a monofunctional and label-free methacrylate monomer that contains ether functionality. It possesses a very low glass transition temperature (Tg), making it an excellent plasticizing monomer. This compound is utilized in the formulation of polymers, copolymers, and light-curing systems. Industries such as adhesives and sealants, coatings, and construction benefit from the versatile properties of VISIOMER® BDGMA.

VISIOMER® BNMA (benzyl methacrylate) is an aromatic monofunctional methacrylate known for its low viscosity. It serves as a reactive diluent, offering excellent solvency in adhesive, ink, and coating formulations. This versatile compound finds applications in various industries, including adhesives and sealants, coatings, composites, and electronics.

VISIOMER® N-iPMAA (N-isopropyl methacrylamide) is an alkylated methacrylamide widely employed as a building block in the creation of polymers specifically designed for applications in various industries. These industries include health care, oil and gas, paper, personal care, textile and leather, as well as water treatment. In the oil and gas sector, VISIOMER® N-iPMAA serves as a crucial component for developing polymers that can withstand the demanding conditions of this industry.

VISIOMER® HEMATMDI (diurethane dimethacrylate) is a difunctional methacrylate monomer featuring a urethane group. It is characterized by its low volatility and high reactivity. This compound finds extensive use in radiation curing formulations for varnishes, inks, adhesives, as well as dental compounds. Industries such as 3D printing, adhesives and sealants, coatings, personal care, and healthcare benefit from its versatile properties.

VISIOMER® 1,3-BDDMA (1,3-butanediol dimethacrylate) is a dimethacrylate monomer with low viscosity. It is well-suited for use as a crosslinking agent, providing cohesive strength to polymers. This versatile compound finds applications in various industries, including adhesives and sealants, composites, construction, as well as plastics and rubber.

VISIOMER® THFMA is a low viscosity and low odor monomethacrylate monomer that significantly enhances flexibility and adhesion in adhesive applications. Its low volatility makes it suitable as a reactive diluent for reactive systems, particularly in adhesives. Industries such as adhesives and sealants, coatings, and construction benefit from the diverse applications of VISIOMER® THFMA.

VISIOMER® TMAEMC (2-Trimethylammoniumethyl methacrylate chloride - aqueous solution-) is a quaternized aminofunctional monomer specifically designed for the preparation of water-soluble cationic polymers. It finds applications in various industries such as oil and gas, paper, personal care, pharmaceuticals and healthcare, and water treatment. By utilizing VISIOMER® TMAEMC, polymers with desirable cationic properties can be created, offering benefits in areas such as emulsion stabilization, flocculation, and antimicrobial activity.

VISIOMER® DMAPMA (3-Dimethylamino propyl methacrylamide) is an amino functional methacrylamide monomer. Its methacrylamide structure provides increased hydrolytic stability compared to methacrylic esters. This monomer is commonly used to enhance pigment wetting and improve substrate adhesion to polymers. Industries such as coatings, oil and gas, paper, personal care, and healthcare can benefit from the unique properties of VISIOMER® DMAPMA.

VISIOMER® MPEG 2005 MA W is a highly polar monomer with excellent water solubility. It consists of methoxy polyethylene glycol 2000 methacrylate, with a concentration of 50% in water. This monomer finds applications in industries such as construction, oil and gas, and personal care.

VISIOMER® AMA (allyl methacrylate) showcases exceptional performance due to its two double bonds with different reactivity, enabling graft copolymerization in emulsions. It serves as a crosslinker and co-monomer for graft polymers and serves as a base product for the production of silanes. This versatile compound finds application in industries such as intermediates for synthesis, as well as plastics.

VISIOMER® MPEG 5005 MA W is a highly polar monomer with excellent water solubility. It consists of methoxy polyethylene glycol 5000 methacrylate, with a concentration of 50% in water. This monomer finds applications in various industries including coatings, adhesives, composites, construction, plastics, textiles, leather, oil & gas, paper, water, personal care, health care, and synthesis.

VISIOMER® UHP-HEMA is a specialized ingredient that facilitates the production of dimensionally stable soft contact lenses. It offers excellent oxygen permeability and water uptake properties, ensuring optimal comfort for wearers. This product is particularly well-suited for applications in the healthcare and personal care industries. With VISIOMER® UHP-HEMA, manufacturers can achieve high-quality soft contact lenses that provide both dimensional stability and enhanced wearer comfort. Its unique properties make it a valuable component for producing lenses that offer superior performance and meet the demands of users in terms of comfort and functionality.

VISIOMER® TRGDMA (triethylene glycol dimethacrylate) is a dimethacrylate monomer with low viscosity, making it well-suited for use as a crosslinking agent in free radical polymerization. Additionally, it serves as an adhesion promoter and hardener for PVC plastisols, as well as a component in reactive resins. This versatile compound finds applications in a wide range of industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.