Products in Resins & Binders: Other Cure Method

Tunasresin 3151-70 is Good gloss & gloss retention, good hardness, low yellowing, good adhes•cyl

BECKOSOL® 12054-E2 is a short oil TOFA alkyd supplied in tertiary butyl acetate and Aromatic 100 solvents. This is the same polymer as Beckosol® 12-054 (xylene).

Araldite® GT 6099 N is an unmodified high molecular weight epoxy resin based on Bisphenol A.

Razeen® SL 6071X75 is a medium molecular weight epoxy resin based on Bisphenol A as solvent cut 75% in Xylene. Razeen® SL 6071 X 75 yields similar performance to Razeen® SL 4171 X 75 but due to lower molecular weight the compatibility with insoluble, acrylics and alkyd-amino combinations is improved.

Razeen® SL 4071X75 is a medium molecular weight epoxy resin based on Bisphenol A as solvent cut 75% in Xylene.

AROLON® 880 is an acrylic emulsion designed for wood sealer and topcoat applications. When crosslinked with aminoplast resins, AROLON® 880 gives hard rapid curing chemical resistant films. Clear coatings containing AROLON® 880 cure rapidly under low heat conditions - even at ambient temperatures (72°F) cure conditions. Catalyzed clears are sandable in less than 30 minutes. Whether cured under heat or at ambient temperatures, AROLON® 880 coatings pass KCMA ANSI 161.1 tests. Clear formulations made from AROLON® 880 have lower odor than competitive offerings.

Tunasresin 3401-70 is Fast cure, good gloss & gloss retention, flow properties, good hardness, gcx»d adhesion

NEVCHEM® 130 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

Araldite® GT 7014 N is a solid, unmodified epoxy resin based on Bisphenol A.

AROPLAZ® 6126-Z-65 is a linear saturated polyester for flexible melamine crosslinked baking enamels.

LX®-1144 LV is a thermoplastic low molecular weight, hydrocarbon resin produced by thermal polymerization of mixed DCPD and aromatic styrenic monomers derived from petroleum feedstocks.

Razeen® SR 5004 is a solid medium molecular weight epoxy resin based on Bisphenol A.

CUMAR® 105 is a thermoplastic low molecular weight, hydrocarbon resin produced by catalytic polymerization of predominantly indene and other aromatic monomers.

Araldite® GT 7004 is a solid medium molecular weight epoxy resin based on Bisphenol A.

Razeen® SR 5198 is a high melt viscosity, unmodified epoxy resin based on bisphenol A, designed for high quality industrial coatings.

Razeen® SR 5199 is an unmodified high molecular weight epoxy resin based on Bisphenol A.

Araldite® GT 6609 N is a high melt viscosity, unmodified epoxy resin based on bisphenol A, designed for high quality industrial coatings.