Products in Technical Salts & Inorganics

MultiTech Difunctional B is a product that is specially developed for the formation of active chlorine dioxide generated by mixing powdered inputs that are indicated for higher flows and systems of medium or high complexity. It is used in applications that demand safety, metering accuracy, and reliability. This product is a blend of water-soluble salts, making it 100% soluble, and easy to handle and apply. It also has a low operating cost.

MultiTech Lubricant A is a water-insoluble soap of commercial stearic acid.

BCI Stabilizer A is a high purity organic sodium salt. It can be used as an intermediate for a variety of industrial, manufacturing and HI&I applications. Benefits Non-corrosive Provides excellent performance and environmental benefits Features Monosodium salt of formic acid White crystalline material (also available in liquid versions) High purity (consistent 98% purity vs. industry average 95%) Low-water-content Fully soluble in water Heavy metal free Not classified as hazardous to health or the environment Applications Mineral acids Liquid laundry detergent Pulp and paper Textiles Leather tanning Airport runway de-icers Oil and gas exploration Gycol-free antifreeze Feed acidifier and antimicrobial agent (feed-grade) Heat transfer fluids, specialty lubricants, washing and cleaning products

MultiTech Flame Retardant A is a halogen-free, inorganic boron based multifunctional flame retardant. It is non-toxic, has excellent dispersibility in a number of different polymer systems and shows high thermal stability.

DiTech Processing Aid is a milled, hydrophobic (i.e., not wettable by water) silica, high methanol wettability and low surface. It is used in a great variety of technical defoamers due to its high effectiveness and ease of dispersion.

DiTech Multifunctional C is an economical form of reactive sulfur that is typically a light-yellow colored solution with the accompanying odor of rotten eggs. Hydrogen Sulfide (H‚‚S), a toxic gas, is evolved upon contact of Sodium Hydrosulfide with acids.

DiTech Activator is not only a raw material for organic zinc derivatives. In the rubber industry, it is also used in the production of transparent and translucent rubber items. A product with great potential: In the production of zinc carbonates too, DiTech Activator has many years of experience and offers maximum quality and efficiency for a wide variety of applications in the chemical, pharmaceutical, and cosmetics industries. In these sectors too, we develop specific and individual solutions in close communication with our customers formulations. In addition, we keep developing new application areas in the cosmetics and household sectors, but also in the chemical industry. Our direct and indirect so-called thermal zinc oxides serve a broad application spectrum. For instance, they are used in the rubber, glass/ceramics, pharmaceuticals/cosmetics, and paint/varnish industries. Additional product information: Can be used in zinc soaps and zinc salts, catalysts, cosmetics, and household cleaners, thanks to fungicidal and antiseptic active ingredientsHigh purity and reactivityActivator for sulfur and thiuram vulcanization in the rubber industry

MultiTech E is a finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. ZEOFREE® 80 can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

DiTech Fire Suppressant is a research-tested and field-proven source of readily-available sulfate sulfur and loss-resistant ammonium nitrogen.

DiTech Coagulant is widely accepted as the preferred polyaluminum chloride for cost-effective improvement of finished water quality. As a coagulant, it enhances filter performance, potentially eliminates the need for pH adjustment with alkalis, and decreases sludge residuals. It meets the specifications of American Water Works Association Standard B408-18 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum dosage of 250 mg/L.

BCI C is an inorganic, pale yellow crystalline solid used in chemical manufacturing.

Gelest O-ALLYLOXY(POLYETHYLENEOXY)TRIISOPROPOXYTITANATE, 95% (AKT841) functions as an intermediate. This product is commonly used in chemical production.

SIPERNAT® 50 S is a hydrophilic, finely milled silica. Besides its application as flow aid and highly effective anticaking agent it also may serve as carrier of especially high absorptive capacity in case particle fineness is required.

SIPERNAT® 50 is a hydrophilic, coarse silica with the highest absorptive capacity and a high surface area. It is capable of transforming any liquid solution, water- or oil-based systems into dry powder concentrates of up to 75%.

SIPERNAT® 823 is a finely milled, hydrophilic sodium aluminum silicate. It is primarily used as a free-flow agent in other applications.

SIPERNAT® 28 is a very finely milled, hydrophilic silica. It is primarily used as a thickening or free-flow agent in other applications.

SIPERNAT® 45 S is a carrier silica with high absorbency that finds typical applications in rubber and plastic additives, plant protection formulations, and feed additives. Its benefits include improved flow properties in fine particle applications, faster production rates, and increased capacity.

SIPERNAT® D 10 is a milled hydrophobic (i.e., not wettable by water) silica. It is used in a great variety of defoamers due to its high effectiveness and ease of dispersion.

AEROXIDE® Alu C is a fine-particulate, pure aluminum oxide (Al₂O₃) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

SIPERNAT® 26 is a very finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. SIPERNAT® 26 can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

SIPERNAT® 380 is an ultra-fine particle size precipitated silica with applicability in many markets. Its particle size and distribution are based on a unique process that results in a variety of effects. SIPERNAT® 380 provides excellent free flow and anti-caking properties in powdered foods.

SIPERNAT® 22 is a hydrophilic, coarse silica combining a high absorptive capacity with a good flowability. It is well suited to transform any type of liquid, including defoamers, into dry, free flowing powder concentrates.

ZEOFREE® 80 is a finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. ZEOFREE® 80 can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

SIPERNAT® 45 is a high-absorbency carrier silica that is capable of converting liquid active substances or solutions into powders. It has the ability to produce concentrates with up to 75% concentration. This carrier silica finds typical applications in rubber and plastic additives, plant protection formulations, and feed additives.

SIPERNAT® 22 S is a finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. SIPERNAT® 22 S can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

SIPERNAT® 22 LS is a very finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications.

SIPERNAT® 340 is a medium sized silica with spherical particles and high oil absorption capacity (DBP). Is less dusty than small particle size flow agents, yet still gives good free flow improvement performance.

SIPERNAT® D 13 is a milled, hydrophobic (i.e., not wettable by water) silica, high methanol wettability and low surface. It is used in a great variety of technical defoamers due to its high effectiveness and ease of dispersion.

SIPERNAT® 35 is a very finely milled, hydrophilic, slightly alkaline silica, used in dry roast hydrophobized defoamer formulations.

DelPAC® 1842 is an advanced formulation of basic polyaluminum chloride that has demonstrated exceptional effectiveness in the treatment of drinking water and the elimination of phosphorus in municipal and industrial wastewater systems. It conforms to the specifications outlined in the American Water Works Association Standard B408-18 and meets the criteria established in NSF/ANSI 60: Drinking Water Treatment Chemicals - Health Effects with a maximum dose of 250 mg/L.

USALCO Aluminum Chloride is a solution that is very effective in drinking water treatment, removal of phosphorus from municipal/industrial wastewater, and as an intermediate chemical in the manufacturing of various products. This product complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects at a maximum dosage of 250 mg/L.

USALCO Ferrous Sulfate (5%) is an effective liquid coagulant made from bivalent iron (Fe2+). It is produced through the reaction of high-purity iron ore and metallic iron with sulfuric acid. This solution can be efficiently used as a flocculant and coagulant in the treatment of municipal and industrial water and wastewater. Its applications include controlling hydrogen sulfide, reducing chromate and complexing cyanide, de-chlorination, conditioning sludge, and precipitating phosphate with aeration.

USALCO Sodium Aluminate Solution (45%) is an economical source of highly reactive alumina manufactured by dissolving alumina tri‐hydrate (ATH) into sodium hydroxide and water. USALCO 45 is also stabilized to prevent alumina from precipitating. The use of only stringently selected raw materials and state‐of‐the‐art manufacturing practices ensures that USALCO 45 is of the highest quality. USALCO 45 meets the specifications of the American Water Works Association Standard B405‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐Health Effects at a maximum dosage of 89 mg/L.

USALCO Sodium Aluminate Solution (38%) is an economical source of highly reactive alumina manufactured by dissolving alumina tri‐hydrate (ATH) into sodium hydroxide and water. USALCO 38 is also stabilized to prevent alumina from precipitating. The use of only stringently selected raw materials and state‐of‐the‐art manufacturing practices ensures that USALCO 38 is of the highest quality. USALCO 38 meets the specifications of the American Water Works Association Standard B405‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐Health Effects at a maximum dosage of 105 mg/L.

USALCO Dry Aluminum Sulfate (Rice Grind) is manufactured using state-of-the-art processes and high-quality raw materials to ensure that the product meets the highest quality standards. USALCO offers various grades of dry alum, including low-iron, iron-free, and FCC grades, as well as specialty granular sizes to meet a wide range of applications. This product is used in water treatment, dye production, leather tanning, and papermaking, among other industrial applications. It meets the specifications of the American Water Works Association Standard B403-16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum recommended dosage of 150 mg/L.