Products in Composite Materials: Surface Finish

Lavecoat IO is based on IsoPhtalic resin, provide very protection and good mechanical performance in external applications with exposure to water and sunlight.

NM Gelcoat 230 is a white solvent free epoxy system designed for surface coats on molds.

Schmelzer Industries PEARLVEIL 3 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

Lavecoat FT Represents an evolution in the flame retardant gelcoat range since thanks to its intumescent properties it provides high fire protection combined with a very low smoke emission. In combination with Lerpol RS61, it enables the manufacturing of parts rated class HL3 in R1 and R7 according to EN 45545 norms.

Sogel Aquaguard Gel coats are developed from a proprietary ISO/NPG resin with high quality pigments and special additives. These gel coats provide excellent resistance to chlorine, blush/blister resistance, weathering resistance, and gloss retention. They have very good flexibility and crack resistance at demold.

Nord Composites GF 921 is a op coat formulated with isophthalic resin, used to make floor coverings with or without the use of corundum as an anti-slip. Thixotropic, pre-accelerated. Gun or robot application. Contains a film-forming agent.

Schmelzer Industries PEARLVEIL 15 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

VTFA400 (DF034) toughened epoxy adhesive film is design to cure between 65°C and 120°C, allowing flexibility in component manufacture.

Armorguard® 967 Black have been formulated as barrier coats to reduce osmotic blistering, and as print blockers, to provide a smoother gel coat finish.

EPOVIA ORTHO SP - Orthophthalic,good workability,available in a range of white and or color. Main Applications areas are Agrochemical,Agrobusiness,Solvents etc.

SURFITEX™ EU 45 G NL is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.

Polycor® 969 Colors - sanding, MACT compliant gel coat for use in manufacture of FRP parts to be painted. Excellent sanding properties and good elongation. Can be used for room temperature and heated molding applications. Main applications areas are aeronautical, railway sector, textile industry etc.

Polycor® Tooling VE BR Neutral 0000 - speciality vinyl ester based gel coat formulated to provide our highest level of heat resistance. A high gloss durable surface, resilient to the repeated molding cycles of composite production. High levels of styrene and chemical resistance.

RECKLI Adhesive Paste EP is a slightly thixotropic, solvent-free, two-component adhesive resin for the adhesion of wood, paperboard, natural or synthetic stone, various metals and plastics. Its color is creamy-white.

Polynt Group 54X series gelcoat are formulated with a particular mix of polyester resins, for use in applications where sun exposure and weather conditions are a factor. They are suitable for boats, truck cabs, water slides and environments with humidity and direct sun exposure. This unique formulation is easier and quicker gloss recovery with less buffing time to achieve gloss.

POLYCOR® LSC NPG FLEX PA WHITE 9199 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

Polycor® iso NPG BR - isophthalicnpg, excellent water resistance, chemical resistance, good UV resistance, good gloss retention available in a range clear or color variants. Main applications areas are agrochemical, agrobusiness, building and construction, furniture etc.

Lavecoat IN is an industrial gelcoat designed as an ideal primer for further painting. It delivers a good surface quality at a very competitive price.

POLYCOR® M1 BR WHITE - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.Product is recommended for the manufacture of industrial pieces requiring additional fire retardence. The product was designed for INTERNAL pieces ONLY.

AeroWindTech AWTNPP 204 is designed for vacuum bag lay-up composites, metal-to-metal bonding structures, and resin infusion layup processes. It is a white nylon with red tracers to prevent material being left behind. This Heat Set and scoured finish material is a 100% Nylon 6, 6 fiber and melts at approximately 419° F (212° C). This product is not recommended for phenolic systems. The fabric leaves a rough surface impression for priming and secondary bonding and is available in precision slit widths.

Sogel Fire Retardant Gel coats have been developped with a propietary halogenated polyester resin Special additives provide superior fire resistance. Their exceptional formulation allow them to meet multiple international standards.

Polycor® 970 Series patchaid® resin and monomer-based solutions for spray patching. Patching thinners for marine clear and tooling gel coats. Polycor® wax solutions for addition to polyester gel coats.Main application areas are railway sector, textile industry etc.

Polycryl B-501 Black is a vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

Silicraft 111® is the first silicone RTV projectable 1/1 mixture without phase air bubble removal.

ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.

Hollingsworth & Vose Co. 8000020 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

POLYCOR® ISO NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed

RESOLCOAT 7060(S) COULEUR is an tintable epoxy gelcoat (RAL color chart). The RESOLCOAT 7060(S) COLOR / 7064 & 7067 epoxy system is a tinted gelcoat formulated for the production of molds & composite parts. It is available in WHITE & BLACK Nevertheless, a post-cure will make it possible to obtain optimal thermomechanical properties. The 7060S COLOR version is an accelerated version which offers greater responsiveness and reduced working time. Two hardeners are available: a slow (7064) & a fast (7067) depending on the desired reactivity. in standard. It is also possible to choose the desired RAL color by combining 7060 BASE with our PIG RAL xxxx epoxy pigment pastes. The gelcoat hardens at room temperature and can be unmolded without post-curing.

Nord Composites GC 514 is a gel coat based on orthophthalic resin. thixotropic and pre-accelerated product. gel coat for the production of parts to be sanded and repainted. Ease of sanding - quick drying - no microporosities.

Polycryl B-602HT Black is a high temperature vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent high temperature specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

KarpatSmoly UMF Resin Grade B is an aqueous suspension, non-flammable, non-explosive. The finished product contains 10% of melamine by weight.

Sogel ISO/NPG Balcony gel coats are developed from an ISO/NPG resin with high quality pigments and special additives to provide an excellent flexibility. These gel coats provide excellent weathering and osmosis resistance. These gel coats have been formulated to be easily sprayable and have good application properties.

GELCOATS TP1001 is a Orthophthalic based gelcoat.

Sogel Aquaguard Shimmer Gel coats are developed from a proprietary ISO/NPG resin with high quality pigments and special additives. These gel coats provide excellent resistance to chlorine, blush/blister resistance, weathering resistance, and gloss retention. They have very good flexibility and crack resistance at demold.

Hollingsworth & Vose Co. 8000195 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

Schmelzer Industries TRUMAT 1/4 Ounce is a non-woven, semi-continuous strand glass fiber mat designed for pultrusion and filament winding. Ideal for use in thin wall profiles or for resin rich surface finishes.