Products in Reinforcements

Composite Materials Reinforcement B is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weightpowerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weight

MultiTech MultiFunctional K is a natural raw cellulose. MultiTech MultiFunctional K is a beige colored softwood product with a cubic structure. The main particle range is 70-150 µm. It is a sustainable material for various applications as reinforcement and functional filler.

DiTech Reinforcement is an ultrafine mat of polyacrylonitrile produced by electrospinning. This product is a free standing flexible sheet with microstructural features not available from a bulk material. The fine scale of fiber diameters produces a membrane material with an inherently high surface area to volume ratio. The interconnected irregular shape pores within the fibers largely increases the pore volume (porosity) and accessible surface area.

Composite Materials Reinforcement A is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

MultiTech Fiber Reinforcement is right from the stalk of the hemp plant. Its known as the bast or outer bark fiber of the hemp stalk.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

USA Long Hemp Fiber 5" is right from the stalk of the hemp plant. It’s known as the bast or outer bark fiber of the hemp stalk.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Electrospun PAN is an ultrafine mat of polyacrylonitrile produced by electrospinning. This product is a free standing flexible sheet with microstructural features not available from a bulk material. The fine scale of fiber diameters produces a membrane material with an inherently high surface area to volume ratio. The interconnected irregular shape pores within the fibers largely increases the pore volume (porosity) and accessible surface area.

Hemp Hurd Powder 2mm can be used in many applications from plastics, to wood products, paper products and so much more.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Hemp Hurd Powder 0.6mm is used as a filler in plastics, alternative to wood dust products, used for paper products, absorbent materials and more.

Electrospun PVA is an ultrafine mat of polyvinyl alcohol produced by electrospinning. This product is a free standing flexible sheet with microstructural features not available from a bulk material. The fine scale of fiber diameters produces a membrane material with an inherently high surface area to volume ratio. The interconnected irregular shape pores within the fibers largely increases the pore volume (porosity) and accessible surface area.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Hemp Seed Hulls (Shells) is an alternative to other seed shell products like buckwheat hulls. Great for meditation cushions, crafts, and other applications.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Hemp hurd fiber are the inner-core fiber of the hemp stalk. This is the woody, soft part of the hemp stalk. It’s what’s left over when the bark fiber is removed.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Degummed hemp fiber is raw hemp fiber which has been processed to remove the lignins making the natural hemp fibers softer and easier to turn into yarn or other products.Lignin is a compound in the hemp plant fibers that holds the fibers together and gives the hemp stalks their strength and rigidity.We do offer a few other types of fiber, but if you think this might work for you application or product, we are happy to answer any questions you might have.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Hemp Hurd 1/2 inch is perfect for building applications such as hempcrete. This is the fiber that produces non-woven items.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.