Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Composite Materials
Surface Finishes
Products in Surface Finishes
409 Products found in Surface Finishes
Browse
Applications
Show All 4 Categories
Filters
Suppliers
Applications
End Uses
Chemical Family
Functions
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Polynt Group
POLYCOR® 944 NEUTRAL BASE
Chemical Family:
Unsaturated Polyester (UPE), Isophthalics
Functions:
Surface Finish
Color:
Off White, White
Polycor® 944 Neutral Base isophthalic gel coats are high quality coatings developed for the fiberglass industry. These gel coats provide quality finishes, which deliver good chemical/water resistance, gloss retention, weatherability, and resiliency. These gel coats are formulated to meet the rigid requirements of transportation, boating, and sanitary applications. They have enabled customers to meet and surpass all requirements of the American national standard for plastic bath tubs, shower receptors and shower stalls, ANSI Z124.1, .2 -1995, sec. 6.1.1. 944 gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Polycor® 944 isophthalic gel coats are available in a wide range of eye-appealing colors. Customer color matching is available on request. See polynt’s 944-W-005 data sheet for standard White isophthalic gel coat.
DUGALAK
DEPOL IN 900 TG FIRE RETARDANT GELCOAT
Applications:
Housewares, Industrial & Transport Packaging, Rail & Mass Transit
Product Families:
Gelcoats & Topcoats, Surface Finishes
End Uses:
Automotive Interior Trim, Industrial Containers, Ducts
Depol in 900 TG Fire Retardant Gelcoat is a high quality pre-accelerated fire retardant gelcoat on the basis of the resin, produced with chlorendic anhydride. The variant for hand lay-up as well as for spray application is commercially available.
MARTE SpA
Ares® P200 NGSL
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resin, Resins, Binders & Matrix Materials
Chemical Family:
Isophthalics, Polyesters, Unsaturated Polyester (UPE)
Ares P200 NGSL isophthalic resin of medium reactivity. Excellent resistance to chemical agents. Excellent color stability, UV stabilized. Good compatibility with fillers and pigments.
KarpatSmoly
KarpatSmoly MUF Resin
Functions:
Resin, Surface Finish, Adhesive
KarpatSmoly MUF Resin is an aqueous suspension, non-flammable, non-explosive. The finished product contains 10% – 24%of melamine by weight.
P & P Technology
P & P Technology AS-SCS001 CONDUCTIVE SILICONE CAULK
Chemical Family:
Silicones
Functions:
Surface Finish, Adhesive
P & P Technology AS-SCS001 CONDUCTIVE SILICONE CAULK is an electrically conductive composite material comprising of silicone elastomer and silver plated copper particles. It is designed to be easily applied to panel joints &seams and/or the small clearances that result from non-continuous mechanical fixing in sheet metal enclosures. On application it cures at room temperature to form a highly conductive elastomeric section / joint that has good adhesion to most commonly used metals &substrates. When fully cured it will prevent water ingress and improve the EMI shielding performance of panel joints &overlaps.
Polycryl
Polycryl Y-602HT Orange
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Vinyl Esters
Functions:
Surface Finish
Color:
Orange
Features:
Faster Cure, Chemical Resistance, High Gloss, High Heat Distortion Temperature
Polycryl Y-602HT Orange is a high temperature vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent high temperature specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.
Polynt Group
POLYCOR® M1 SP
Functions:
Surface Finish
Color:
Custom
POLYCOR® M1 SP - Fire retardant gel coat. Fire & smoke properties (NF P 92-507): M1F3 (Official approval - Available upon request) Available in a wide range of colors and may be color matched on request.
Nord Composites
Nord Composites GC 595
Chemical Family:
Isophthalics, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
End Uses:
Showers
Features:
Thixotropic, UV Resistant, High Hydrolysis Resistance, Good Non-Yellowing Properties
Nord Composites GC 595 is a GC 595 is formulated with iso-NPG polyester resin. Specially formulated for the sanitary industry. thixotropic and pre-accelerated. UV and yellowing resistant. Good covering power. Good resistance to hydrolysis.
Sogel Inc
Sogel Inc General Purpose Laminating Resin
Chemical Family:
Polyesters
Functions:
Surface Finish
Processing Methods:
Spray Lay-up, Continuous Lamination, Hand Lay-up
Features:
Good Mechanical Properties, General Purpose, Tack-free, Medium Viscosity
Our General Purpose Laminating Resin has been developed from a polyester resin providing very good mechanic properties. Given their low to medium viscosity, they offer very good wetting of fiber glass. In addition Sogel’s General Purpose Laminating Resins have very good crosslinking and short “Tack Free Time”.
Polynt Group
POLYCOR® TOOLING BR CLEAR 0200
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
Orange, Black, Green
Features:
Chemical Resistant, High Impact Resistance, Chemical Resistance, Flame Retardant
POLYCOR® TOOLING BR CLEAR 0200 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.
L&L Products
L & L Products L-9060 Part A
Chemical Family:
Epoxy & Epoxy Derivatives
Functions:
Fairing Filler, Surface Finish
End Uses:
Pump Parts
L & L Products L-9060 Part A is a fire, smoke, and toxicity (FST) compliant, two-component light weight epoxy formulation designed for panel finishing and reinforcement of aircraft interiors.
Polynt Group
Polynt Group 50, 50X
Functions:
Surface Finish
Polynt Group 50, 50X - easy to sand and polish; excellent resistance to yellowing and fading due to sun exposure; resistance to thermal change and weathering; higher gloss recovery when polishing back aged or from lower gloss mold; excellent blister resistance. Main applications areas are building and construction, composites etc.
Polynt Group
POLYCOR® LP BR WHITE 9199
Chemical Family:
Isophthalics
Functions:
Surface Finish
Color:
Custom, Off White, White
POLYCOR® LP BR WHITE 9199 - A pre-accelerated gel coat based on modified Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This product is formulated for use in a variety of industrials composite parts.
Polynt Group
ARMORFLEX® 945
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Features:
High Durability
Armorflex® 945 - polyester and vinyl ester tooling gel goats; formulated specifically for mold making; high gloss and hard, durable surfaces. Main applications areas are composites, industrial sector etc.
Polynt Group
POLYCOR® 943 NEUTRAL BASE
Chemical Family:
Diols, Isophthalics, Glycols, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
White
Features:
Chemical Resistant, Chemical Resistance, High Durability
Polycor® 943 Neutral Base are high performance gel coats formulated for use in sanitary and marine applications or any FRP application where resistance to water and blistering are needed. Use of Polycor® 943 gel coats has enabled customers to meet and surpass all requirements of the American national standard for plastic bath tubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 1995, sec. 6.1.1. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Polycor® 943 gel coats are available in whites and a wide range of colors.
LAVESAN
Lavecoat OR
Chemical Family:
Orthophthalics, Polyesters
Functions:
Surface Finish
End Uses:
Industrial Containers, FRP Boats, Tanks, Marine Applications
Features:
Good Hiding Power, Good Weather Stability
Lavecoat OR is an orthoPhtalic gelcoat for general purposes. Easy to apply and with very good hiding power. It is suitable for parts with moderate external weather ability requirements.
Sogel Inc
Sogel Inc Repairing Gel coats
Chemical Family:
Polyesters
Functions:
Surface Finish
Features:
Excellent Surface Finish, Good UV Protection, Good Bright Luster, UV Protection, High Durability, Improved Flexibility, Good Surface Finish, Excellent Gloss Retention, Blush Resistant, Good UV Resistance, Excellent Chalk Resistance, Crack Resistant, Low Blistering
The formulation of our high performance Marine ISO/NPG Gel coats are based on a special ISO/NPG polyester resin. These products were developed to provide good durability and superior flexibility, while keeping high quality finish and minimal maintenance. Additionally, their excellent Air Dry times make them suitable for repairs and repainting. The combination of neopentylglycol and isophtalic acid provides excellent resistance, not only to water blistering and osmosis, but also to the UV light.
Polynt Group
POLYCOR® LP PA WHITE 9199
Chemical Family:
Isophthalics
Functions:
Surface Finish
Color:
Custom, Off White, White
POLYCOR® LP PA WHITE 9199 - A pre-accelerated gel coat based on modified Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This product is formulated for use in a variety of industrials composite parts.
Polynt Group
POLYCOR® MESMERIC
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Features:
UV Protection, Chemical Resistant, Good UV Protection, Chemical Resistance
Polycor® Mesmeric is the most recognizable fiberglass swimming-pool finishes range in australia: it is unbeatable in terms of performance, practicality and value for money, as well as esthetically beautiful. Formulated on Polycor® 943 gel coats, Polycor® mesmeric pool finishes offer exceptional water and chemical resistance, as well as long lasting UV stability. Available in three distinct styles, there is a color and texture combination that will co-ordinate with any architectural or exterior setting. Mesmeric stargaze has a brilliant deep sparkling lustrous finish that looks fabulous from a distance. The tiny sparkles change color as the direction of light changes. A fantastic effect as wave action changes the sparkle in sunlight or by pool light at night. Mesmeric granitea has a slightly more restrained finish, still with a beautiful lustrous gloss, but with a fascinating stone texture enhancement, giving a subtle natural look. Mesmeric silken has a deep, lustrous gloss finish but without any texture effects – designed to blend into more traditional architectural surroundings. It is generally used in composites applicatons.
Polynt Group
ARMORFLEX® 953 BASE WHITE
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Color:
White
Armorflex® 953 Base White gel coats are high performance, iso/npg products that display desirable high gloss buffback® qualities. Buffback® qualities of these gel coats are demonstrated as:easier, quicker gloss recovery less buffing time to achieve gloss .Higher gloss recovery when polishing back aged or exposed gel coat surfaces.Higher gloss in the repair patch and surrounding refinished area.Higher gloss recoverability from lower gloss molds. Higher gloss can be perceived as a deeper, richer color, providing an enhanced cosmetic appearance to the gel coated part. While offering these benefits, the Armorflex® 953 series gel coats have retained the important construction application qualities expected from ccp gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. All of these properties contribute to the high quality appeal in FRP parts made from ccp high gloss Armorflex® buffback® gel coats. Gel coats in this series resist weathering and blistering because they are formulated to give high performance against water and certain chemicals, although blister resistance is best with gel coats in the 943 series. Gel coats in the 953 series are made with neopentyl glycol Npg and were primarily developed for sanitary and quality marine applications; however, they should be used in any FRP application where high performance characteristics are desired. 953 gel coats utilize this unique glycol to provide a gel coat that surpasses previous commercial gel coats in its resistance to blistering. They also contain isophthalic acid iso as a cocomponent rather than orthophthalic acid. The isophthalic functionality is used, rather than the orthophthalic to complement the NPG for better end use properties. These gel coats provide durable, reduced maintenance products. These gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 –1995, sec. 6.1.1.
Polynt Group
IMEDGE® PCT 110 NEUTRAL BASE
Functions:
Surface Finish
Features:
Excellent Toughness, High Impact Resistance, Good Color Stability, High Toughness
Imedge® PCT 110 Neutral Base are advanced polymer coating technology PCT products that have been formulated to be used as in-mold, exterior coatings for reinforced plastic parts.
Nils Malmgren AB
Nils Malmgren AB NM Gelcoat 095 C
Chemical Family:
Epoxy & Epoxy Derivatives
Functions:
Surface Finish
End Uses:
Mold Making
NM Gelcoat 095C with NM Hardener 101 is a metal powder filled epoxy resin with a low coefficient offriction. NM Gelcoat 095C is designed as a surface resin for molds where there are high demands on durability and lack of pores.
Polynt Group
POLYGEL 35
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Features:
High Durability
Polynt Group Polygel 35 - polyester and vinyl ester tooling gel coats; formulated specifically for mold making; high gloss and hard, durable surfaces. Main applications areas are building and construction, composites, industrial sector, marine, railway sector etc.
Polynt Group
Polynt Group 22-00
Functions:
Surface Finish
Features:
Excellent Toughness, High Impact Resistance, High Toughness
Polynt Group 22-00 series gelcoat is formulated from high quality polyester resin, which cures to form a tough, glossy finish with superior gloss and water resistance. 22-series gelcoat does not contain filler.
Polynt Group
Polynt Group 24X
Functions:
Surface Finish
Color:
Custom
Features:
Flame Retardant, Faster Cure, Fast Curing
Polynt Group 24X series gelcoats are enamel like coatings developed for the composites and fiberglass industry. These gelcoats are used as an enamel coating, similar to paint and are often used to hide any fiberglass pattern inside the part. This series is suitable for water immersion and can be used if high blister resistance is not a major concern. The 24X series gelcoat can also be used to protect the laminate against u.V. Rays. 24X series gelcoat is more like a polyester paint and offers improved cosmetic surface of fiberglass. 24X series gel coats are sag resistant and have a fast curing system.Formulated for spray and roll application.Fast gel time and cure time that provide a good cure.Require only the addition of a proper amount of mekp to cure.Easy to spray and rollgood hiding abilities. These gelcoats are available in a wide range of appealing colors. Color matching is available on request. The numbers following: 24x…indicate the product color code. For parts in contact with water, severe conditions we recommend an npg/iso base gelcoat. For fire retardant properties, we recommend a specific fire retardant base gelcoat. Parts that have to be assembled should be sanded before, to obtain a good adherence. 24 series gelcoat may be applied by brush, roller or spray.
Schmelzer Industries
Schmelzer Industries PEARLVEIL 10 mil
Reinforcement Material:
Glass Fibers
Reinforcement Form:
Veil
Functions:
Surface Finish
Processing Methods:
Vacuum Infusion Processing (VIP), Compression Molding, Continuous Lamination, Resin Transfer Molding (RTM), Filament Winding
Schmelzer Industries PEARLVEIL 10 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).
Polynt Group
ARMORCOTE® SP
Chemical Family:
Isophthalics, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Features:
Good UV Protection, Chemical Resistant, Chemical Resistance, UV Protection, Flame Retardant
ARMORCOTE® SP - Light stabilized accelerated isophthalic gel coat base with medium reactivity and superior weather resistance.
Polynt Group
Polynt Group 224X
Functions:
Surface Finish
Features:
Faster Cure, Fast Curing
Polynt Group 224X series clear gelcoats are enamel like coatings developed for the composites and fiberglass industry. These gelcoats are used as an enamel coating, similar to paint and are often used as a translucent coating. The 224X series gelcoat can also be used to protect the laminate against u.V. Rays. 224X series gel coats are sag resistant and have a fast curing system. This coating system is ready to spray, requiring only the proper addition of an appropriate methyl ethyl ketone peroxide to cure.Formulated for spray and roll application.Fast gel time and cure time that provide a good cure.Require only the addition of a proper amount of mekp to cure.Resistant to thermal change and weathering for parts in contact with water, severe conditions we recommend an iso/npg base gelcoat for marine applications. Parts that have to be assembled should be sanded and cleaned, to obtain a good adherence.
Sika
Sika GC2 070
Chemical Family:
Epoxy & Epoxy Derivatives
Functions:
Surface Finish
Color:
Blue
Features:
Abrasion Resistance, Abrasion Resistant, Temperature Resistance
Shelf life of Sika GC2 070 Resin is 12 months in a dry place and in their original unopened containers at a temperature between 15 and 25°C.
Nord Composites
Nord Composites GC 511
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics
Functions:
Surface Finish
Features:
Thixotropic, Rapid Drying Properties, Non-porous, Good Sanding Properties
Nord Composites GC 511 is a gel coat based on orthophthalic resin, thixotropic and pre-accelerated product, gel coat for the production of parts to be sanded and repainted, Easy sanding - quick drying - no microporosities,.
Polynt Group
ARMORFLEX® 953 NEUTRAL BASE
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Color:
White
Features:
Chemical Resistant, Chemical Resistance
Armorflex® 953 Neutral Base gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications, but should be used in any application where water and chemical resistance are needed. Armorflex® 953 series also have exceptional gloss and buffing characteristics. While offering these benefits, the Armorflex® 953 series gel coats have retained the important construction application qualities expected from polynt composites gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from polynt’s Armorflex® high gloss buffback® gel coats. Armorflex® 953 series gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 –1995, sec. 6.1.1. Gel coats in the 953 series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. Armorflex® high gloss buffback® gel coats are available in the same wide range of Colors as other Polycor® gel coats. Refer to polynt’s Polycor® color card for color selection. Standard Base White Armorflex® is 953wj340.
Sogel Inc
Sogel Inc General Purpose DCPD Laminating Resin
Functions:
Surface Finish
Processing Methods:
Spray Lay-up, Continuous Lamination, Hand Lay-up
Features:
Good Mechanical Properties, Good UV Resistance, General Purpose, Low Shrinkage
Our General Purpose DCPD Laminating Resin has been developed from a special ORTHO/DCPD resin This, in combination with high quality additives, allow optimal performance for the manufacture of open-mold glass fiber reinforced parts with highly esthetique finish. Given their low volume shrinkage, they exhibit minimal glass print. They present excellent application and wet-out properties and have an excellent follow-through cure.
Polynt Group
POLYGEL 32
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Polynt Group Polygel 32 - orthophthalic gel coat; good wettability; also suitable for transportation market. Main applications areas are composites, industrial sector, mass transports etc.
Polynt Group
POLYCOR® TOOLING VE PA NEUTRAL 0000
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Vinyl Esters
Functions:
Surface Finish
Color:
Orange, Black, Green
Features:
Chemical Resistant, High Impact Resistance, Chemical Resistance, Flame Retardant
POLYCOR® TOOLING VE PA NEUTRAL 0000 - A pre-accelerated gel coat based on Vinyl Ester unsaturated polyester resin. Cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.
Sogel Inc
Sogel Inc Clear Gel coats
Functions:
Surface Finish
End Uses:
Sinks
Color:
Transparent
Features:
Excellent Chalk Resistance, Crack Resistant, Low Blistering, Excellent Surface Finish, Good Stain Resistance, Good UV Protection, Excellent Surface Properties, Good Bright Luster, UV Protection, Abrasion Resistant, Improved Flexibility, Good Surface Finish, Excellent Gloss Retention, Excellent Transparency Properties, Blush Resistant, Good UV Resistance
Sogel Clear Gel coats have been formulated from ISO / NPG resin to provide a clear finish with very good long-term abrasion and stain resistance. These gel coats have very good application properties and surface finish.
Nord Composites
Nord Composites GP 795
Chemical Family:
Isophthalics, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
Custom
Features:
Fast Setting, Low Styrene Content, High Hydrolysis Resistance
Nord Composites GP 795 is a Maritime gel coat based on Iso / NPG resin. pre-accelerated product. Low styrene gel coat with fast setting time. Good resistance to hydrolysis. The use of this gel coat in dark shades is not recommended in this field of application.
Show
36
of 409 results
Go to page
1
2
3
4
5
6
7
8
9
10