Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Application Method
- Application Method
This gel coat is ready to be applied using airless spray equipment. Mix the product slowly but thoroughly for 10 minutes prior to each shift start up. Apply the correct film thickness. A wet film thickness between 300 to 600µm is required ideallyapplied in 3 even passes. Check that the correct level of MEKP is added. A level of 1,8% w/w is recommended. Do not use more than 3% w/w or lower than 1,2% w/w of MEKP catalyst. Minimum application temperature : 18°C This product is not designed for use with a roller or brush.
Properties
- Mechanical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Elongation at break | 3,0 | % | ISO 527 |
Tensile strength | 45 | MPa | — |
H.D.T (NFT ISO 75) (2h at 120°C) | 116 | °C | — |
Value | Units | Test Method / Conditions | |
Density | 1,11 - 1,15 | — | — |
Sag Resistance | 500 | μm - wet | — |
Color | Depends colour | — | — |
Thixotropic Index (2/20 rpm) | 6,0 - 7,5 | — | — |
Viscosity (25°C - Spindle 4-4 rpm) | 10000 - 14000 | dPa.s | — |
Solid Content (15mn at 150°C) | 56 - 60 | % | — |
Hide | 700 - 900 | μm - wet | — |
Value | Units | Test Method / Conditions | |
Film cure (500μ - 20°C - 2% MEKP) | 30 - 50 | mn | — |
Gel Time (200g - 25°C - 1,8% MEKP) | 12-18 | mn | — |
Peak Time (200g - 25°C - 1,8% MEKP) | 18 - 35 | mn | — |
Peak exotherm (°C) (200g - 25°C - 1,8% MEKP) | 180 - 220 | — | — |
Storage & Handling
- Storage and Shelf Life
Shelf-life :
4 Months .
Storage :
When the product is sealed in its original packing, stored indoors away from direct sunlight and direct heat sources and ideally at ambient temperature between 15°C and 25°C .