Products in Elastomers: Potting

K-KAT® XK-604 is an effective catalyst for the production of urethane cast elastomers. It is designed as a mercury alternative catalyst that provides good workability and efficient snap cure profile. Good compatibility is seen with 1,4-butanediol.

InvisiSil™ IVS4542 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer.Key Features and Benefits Low viscosity allows for excellent flowability Excellent transparency Convenient 1:1 mix ratio by weight Cures fast with heat and adheres to parts Potential Applications Coating and potting of optical device.

InvisiSil™ IVS4312 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer.Key Features and Benefits Low viscosity allows for excellent flowability Excellent transparency Convenient 1:1 mix ratio by weight Cures fast with heat and adheres to parts Potential Applications Coating and potting of optical device.

HAPFLEX 1000 products are a series of tough, colorless, low Shore A durometer elastomers.HAPFLEX 1000 products are used in both: mechanical applications - i.e. parts, gaskets, molds, fixtures and …….. electrical insulation applications - i.e. potting and encapsulating.Colorless castings and high strength are key attributes of the HAPFLEX 1000 Series.

InvisiSil™ IVS4632 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer.Key Features and Benefits Low viscosity allows for excellent flowability Excellent transparency Convenient 1:1 mix ratio by weight Cures fast with heat and adheres to parts Potential Applications Coating and potting of optical device.

McLube® 1038 is a non-transferring, semi-permanent coating with cutting edge additives that make it ideal for epoxy molding and epoxy-bound composite manufacturing. Heat or air-cured.

McLube® 1212 is a water-based dispersion of fluoropolymers and proprietary binder technology formulated for effortless release of epoxies and other resins and binders. No cure required. Dilutable.

InvisiSil™ IVS4742 is a two-component, addition cure silicone rubber designed for optical device coating. This product cures with heat to an elastomer.Key Features and Benefits Low viscosity allows for excellent flowability Excellent transparency Cures fast with heat and adheres to parts Convenient 1:1 mix ratio by weight Excellent adhesion to Polyphthalamide (PPA) Potential Applications Coating and potting of optical device LED Encapsulant and Lens.

McLube® 799 is a water-based dispersion of finely divided fluoropolymers designed to provide excellent release of mandrel-built epoxy-bound composites. Chemically inert and durable enough to withstand harsh curing conditions.

HAPFLEX 1000 products are a series of tough, colorless, low Shore A durometer elastomers.HAPFLEX 1000 products are used in both: mechanical applications - i.e. parts, gaskets, molds, fixtures and …….. electrical insulation applications - i.e. potting and encapsulating.Colorless castings and high strength are key attributes of the HAPFLEX 1000 Series.

Silicones P-157 is a low viscosity, transparent silicone rubber used for potting or encapsulation of intricate parts where visual inspection is required. P-4 offers electrical stability, radiation resistance and will resist reversion when heated in confined spaces. Although it has high tensile strength, it can be easily cut and removed for part repair and then re-poured.

HAPFLEX 1000 products are a series of tough, colorless, low Shore A durometer elastomers.HAPFLEX 1000 products are used in both: mechanical applications - i.e. parts, gaskets, molds, fixtures and …….. electrical insulation applications - i.e. potting and encapsulating.Colorless castings and high strength are key attributes of the HAPFLEX 1000 Series.

BC8990 is a two-component urethane elastomer compound specifically designed for general purpose molding and casting of various shapes. This product is a safe, easy-to-handle, room temperature mixing and curing system that contains no TDI, MDA or MOCA. BC8990 may be used to provide abrasion resistant liners, pads and bumpers. The low shrinkage, low viscosity, superior toughness, and excellent detail reproduction of makes this system ideal for general purpose castings and quality tooling operations. It may also be used in potting and encapsulating applications.

Silicones P-429 is an extremely soft, tacky, transparent, resilient silicone rubber gel. It is a two component, addition cure material that is sensitive to cure inhibition when in contact with sulfur, nitrogen or organo-tin containing materials.

Silopren™ Gel 7206 is a kit matched easily pourable, solvent free, clear and colorless two-component fast curing silicone gel. After mixing the A and the B component at a mix ratio of 1:1 the material cures at room temperature by an addition reaction. Further acceleration of the cure is possible by heat.Key Features and Benefits Convenient 1:1 mixing by weight Low viscosity, free of solvents Fast cure at room temperature Soft gel with high elasticity Potential ApplicationsSilopren™ Gel 7206 was developed for potting of electrical cable joints.

LightSpan® LS2-6941 is a optically clear silicone elastomer.

McLube® 857 is a highly lubricious release emulsion in water. Ideal for epoxy and some polyurethane applications. Cured when dry at room temperature.

Silopren™ Gel 6209 is a kit matched easily pourable, solvent free, clear and colorless two-component silicone gel. After mixing the A and the B component at a mix ratio of 1:1 the material cures at room temperature by an addition reaction to a tacky silicone gel with excellent vibration dampening properties. The cure rate can be accelerated significantly by heat.Key Features and Benefits Convenient 1:1 mixing by weight Low Viscosity, free of solvents Room temperature cure Mechanical shock/ vibration damping properties Very soft gel, tacky to many substrates Potential Applications Silopren™ Gel 6209 is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and potting of cable joints. Silopren™ Gel 6209 can also be used for other applications that require a clear, tacky gel with good dampening properties.

HAPFLEX 1000 products are a series of tough, colorless, low Shore A durometer elastomers.HAPFLEX 1000 products are used in both: mechanical applications - i.e. parts, gaskets, molds, fixtures and …….. electrical insulation applications - i.e. potting and encapsulating.Colorless castings and high strength are key attributes of the HAPFLEX 1000 Series.

Silopren™ Gel 7212 is a kit matched easily pourable, solvent free, clear and colorless two-component silicone gel. After mixing the A and the B component at a mix ratio of 1:1 the material cures at room temperature by an addition reaction. Further acceleration of the cure is possible by heat.Key Features and Benefits Convenient 1:1 mixing by weight Low viscosity, free of solvents Cures at room temperature Soft gel with high elasticity Potential ApplicationsSilopren™ Gel 7212 was developed for potting of electrical cable joints.

Silopren™ Gel 6209FC is a kit matched easily pourable, solvent free, clear and colorless two-component silicone gel. After mixing the A and the B part at a mix ratio of 1:1 the material cures very fast at room temperature by an addition reaction to a tacky silicone gel with excellent vibration dampening properties.Key Features and Benefits Convenient 1: 1 mixing by weight Low viscosity, free of solvents Fast room temperature cure Soft, tacky gel, sticking to many substrates Mechanical shock and vibration damping properties Useful temperature range -50°C to 150 °C Potential ApplicationsSilopren™ Gel 6209FC is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and sensors when fast cure at room temperature is required.

SilTRUST™ TSE3664K is a two-component condensation cure silicone rubber designed for electric potting. TSE3664 K cures at room temperature to form an elastic flame retardant rubber and adheres various types of materials such as metal, plastics, glass and ceramics without the use of primers.Key Features and Benefits flame retardant: UL94V-0 recognized (File No. E56745) low viscosity allows for excellent flowability fast cure excellent deep section cure excellent adhesive properties: primerless adhesion to many types of substrates no cure inhibition Potential Applications potting of electric and communications parts moisture proof sealing of meters moisture proof coating of electric circuit boards.

HAPFLEX 1000 products are a series of tough, colorless, low Shore A durometer elastomers.HAPFLEX 1000 products are used in both: mechanical applications - i.e. parts, gaskets, molds, fixtures and …….. electrical insulation applications - i.e. potting and encapsulating.Colorless castings and high strength are key attributes of the HAPFLEX 1000 Series.

SilTRUST™ TSE3661 is a two-component condensation cure silicone rubber designed for electric potting. SilTRUST TSE3661 cures at room temperature to form an elastic rubber and adheres to various types of materials such as metal, plastics, glass and ceramics without the use of primers.Key Features and Benefits Low viscosity allows for excellent flowability Fast Cure Excellent deep section cure Excellent adhesive properties : primerless adhesion to many types of substrates No cure inhibition Flame retardant: UL94HB recognized (File No: E56745) Potential Applications Potting of electric and communications parts Moisture proof sealing of meters Moisture proof coating of electric circuit boards.

SilTRUST™ TSE3667 is a two-component condensation cure silicone rubber designed for electric potting. SilTRUST TSE3667 cures at room temperature to form an elastic flame retardant rubber and adheres to various types of materials such as metal, plastics, glass and ceramics without the use of primers.Key Features and Benefits Flame retardant : UL94V-0 recognized (File No.E56745) Low viscosity allows for excellent flowability Fast Cure Excellent deep section cure Excellent adhesive properties : primerless adhesion to many types of substrates No cure inhibition Potential Applications Potting of electric and communications parts Moisture proof sealing of meters Moisture proof coating of electric circuit boards.