Products in Elastomers

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

POLYSORB® PA is a high purity grade of isosorbide grade under pellets form (POLYSORB® PA). It offers valuable solutions to performance materials markets: polyesters, composites and coatings, polyurethanes, etc.   Key benefits Temperature resistance Optical properties Surface hardness

ZELEC® A081 is an alcohol phosphate that can be used to help decrease the viscosity of high-pressure compounds. It can also be used to reduce and stabilize viscosity and act as a color stabilizer in rubber. It also plays the role of a lubricant additive for plastic materials and provides antistatic properties in fiber lubricating oils. It can also be used as a spreading agent for oils and waxes and as an internal demolding agent for molding plastic and pultrusion. It is an additive that inhibits deposits of a corrosive nature during the soldering of light metals (aluminum and magnesium) and can be used in construction as a concrete additive. It is also used as a dispersing agent in ink formulations.

MERPOL® SH constitutes a nonionic surfactant solution, offering effective wetting and emulsification properties. It's used as a detergent for hard surface cleaning and as a lubricating agent during rubber part assembly. Its classification belongs to the specialty ethoxylates chemical group.

ZELEC® A130 can be used as a wetting agent in the paint and coating industries. In this application, it could also contribute to the improvement of corrosion resistance, gloss, color acceptance, wet scrub resistance, and the hiding power of the film. It can also be used as an antistatic agent in textile and leather finishing and processing and in rubber, plastic, and composite processing. It can also act as an emulsifier and corrosion inhibitor in metalworking fluid, printing pressrooms, and oil fields. It can also be used as a demolding agent in a construction area and in rubber, plastic, or composite processing. It also has lubrication properties for metalworking fluids and textile and leather finishing and processing, including extreme-pressure and anti-wear properties.

SILPURAN® 6400/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 3852/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3852 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

ELASTOSIL® LR 3066/40 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® R Plus 4360/60 MH is a two-component, high consistency silicone rubber specifically designed for the manufacture of extruded articles. The vulcanizates produced using this silicone rubber exhibit excellent elasticity (rebound resilience) and demonstrate good tear resistance. In comparison to other platinum curing grades like the ELASTOSIL® R plus 4305 series, ELASTOSIL® R Plus 4360/60 MH showcases improved physical resistance.

SILMIX® M40 White is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® M40 White is designed for fabricating molded articles. Furthermore, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."

POWERSIL® 730 A/B is a low-viscosity two-component compound known for its excellent processing properties, high tracking and erosion resistance, as well as outstanding mechanical and electrical properties. It is a ready-to-use system that is very easy to process due to its low viscosity. Additionally, it exhibits excellent dielectric properties and high arcing resistance.

ELASTOSIL® LR 3003/85 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 6289 A/B is a commercial-grade two-component system that cures rapidly upon heating to a silicone rubber. It has been formulated as a moderate-viscosity, high-performance liquid rubber with good heat resistance. The cure is accomplished by simply mixing equal parts (1:1) by weight of parts A and B.

ELASTOSIL® R 401/70 OH US is a colorless, translucent silicone rubber base noted for its flexibility, high transparency, and good mechanical properties. Its vulcanizing characteristics make it possible to achieve rubber moldings by compression, transfer, and injection molding. Post-cured vulcanizates can be used for applications in the health care and food handling industries.

ELASTOSIL® LR 3162 A/B is an electrically conductive liquid silicone rubber. It is a paste-like, two-component compound with short curing times. The vulcanizates are noted for good mechanical as well as electrical properties and for good heat resistance within a temperature range of -55°C to +210°C.

ELASTOSIL® LR 3856/20 A/B is a high-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3856 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

SILMIX® E40 Black is a compound used for fabricating vulcanizates with a distinctive set of characteristics. These vulcanizates are recognized for their excellent flexibility and mechanical properties. Specifically designed for the production of extruded articles, SILMIX® E40 Black enables the manufacturing of high-quality parts. Additionally, when post-cured, these parts can be safely employed in food contact applications, adhering to the recommendation "XV."

ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

POWERSIL® 460 MH is a ready-to-use electrically conductive silicone rubber grade specifically designed for compression molding. It already incorporates curing agent C1. This material is electrically conductive and is suitable for applications such as stress cones for cable accessories and cold shrink accessories.

ELASTOSIL® R Plus 4001/20 MH is a one-component, high-consistency silicone rubber designed for the production of molded articles. It utilizes an addition-cure process, resulting in cured articles that exhibit high transparency and good to very good mechanical properties. ELASTOSIL® R Plus 4001/20 MH is a fast-curing silicone rubber that demonstrates excellent mechanical properties. The addition-cure mechanism ensures a significantly faster vulcanization reaction compared to peroxide curing materials, without the formation of peroxide decomposition products during vulcanization.

ELASTOSIL® RT K is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is specifically designed for reproduction molding applications. This silicone rubber utilizes condensation-curing technology and has a low viscosity, making it easy to pour and work with. ELASTOSIL® RT K is a two-component product, ensuring proper curing and performance. It is well-suited for reproduction molding processes.

ELASTOSIL® LR 3043/40 A/B A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® R Plus 4070/30 MH is a one-component, addition-curing silicone rubber that is specifically designed for the manufacture of molded articles. It exhibits self-bonding properties, eliminating the need for additional adhesive agents. This high consistency silicone rubber is particularly suitable for applications that require vibration damping capabilities.

ELASTOSIL® AUX Stabilizer H0 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.

ELASTOSIL® M 4511 is a room-temperature-curing silicone rubber (RTV-2) that is pourable and condensation-curing. It consists of two components and vulcanizes at room temperature. This grade exhibits outstanding chemical resistance to attack by polyester and polyurethane resins, resulting in a significantly extended mold life. The main application of ELASTOSIL® M 4511 is in making cost-effective molds, particularly well-suited for casting PE (polyethylene) and PU (polyurethane) resins.

ELASTOSIL® LR 3002/35 A/B is a low-viscous, two-component liquid silicone rubber (LSR) compound with excellent processing properties. The material fits very well all requirements for the manufacturing of large articles with special dosing and metering equipment because of its low viscosity.

WACKER® Crosslinker W is a hydrogenpolysiloxane that contains a high percentage of reactive Si-H groups. It is specifically designed for the thermal curing of addition-crosslinking silicone rubbers, both solvent-based and solvent-free. The product exhibits high reactivity, allowing for good adhesion to the substrate. Additionally, it has low volatility and is free of solvents, halogens, and heavy metals.

ELASTOSIL® R Plus 4846/30 MH is a high-temperature vulcanizing (HTV) silicone rubber grade. It is a one-component compound that undergoes platinum-curing and is utilized in the production of molded articles. The vulcanizates generated from this compound develop a thin oil film with lubricating properties soon after the curing process. Since the crosslinking system relies on platinum cure, there are no peroxide decomposition products formed during the curing process.

ELASTOSIL® R Plus 4303/70 is a two-component high-consistency silicone rubber specifically formulated for the production of extruded articles, particularly those intended for contact with potable water. The cured articles exhibit excellent transparency and showcase good to very good mechanical properties. This silicone rubber cures rapidly through addition cure, resulting in a significantly faster vulcanization reaction compared to peroxide-based materials.

ELASTOSIL® LR 3675/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3675 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3070 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the low compression set, there is no need to post-cure finished parts.

LUMISIL® LR 7601/60 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The resulting vulcanizates exhibit exceptional optical transparency, along with excellent mechanical and electrical properties.

ELASTOSIL® R Plus 4020/40 MH is a one-component, high consistency silicone rubber designed for the manufacture of molded articles. When cured, these articles display high transparency and boast exceptional tear resistance. This fast-curing silicone rubber exhibits excellent tear resistance. Thanks to the addition cure process, the vulcanization reaction occurs significantly faster compared to peroxide curing materials. Importantly, no peroxide decomposition products are formed during vulcanization.

ELASTOSIL® LR 34004/50 A/B is a paste-like, white, two-component liquid silicone rubber with a very short curing time. Vulcaniates are noted for their radio-opaqueness. ELASTOSIL® LR 34004/50 A/B contains barium sulfate as a radio-opaque additive, which meets the requirements of the US and European Pharmacopeia.

ELASTOSIL® LR 3003/03 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® SUB C 2000 A/B is a two-component silicone rubber specifically developed for deep-sea applications. It is a pourable material that undergoes addition curing. This silicone rubber exhibits flexibility at both low temperatures (-40 °C) and high temperatures (+180 °C). It has a low viscosity, making it ideal for the manufacturing of various thermal insulating devices.