Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Elastomers
Specialty Elastomers
Products in Specialty Elastomers
1,645 Products found in Specialty Elastomers
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
Physical Properties
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
SILPURAN® 6000/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Medical/Healthcare Applications, Gaskets, Valves, Medical Devices, Connectors
Features:
Fast Curing, Excellent Surface Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Good Electrical Properties, Good Mechanical Properties, Excellent Mechanical Strength, Food Contact Acceptable, Low Volatility
Tear Strength:
30.0 - 30.0 kN/m
SILPURAN® 6000/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® R Plus 4020/60 MH
Polymer Name:
Silicone Elastomer
Features:
Excellent Transparency Properties, Tear Resistance, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency
Tear Strength:
48.0 - 48.0 kN/m
ELASTOSIL® R Plus 4020/60 MH is a one-component, high consistency silicone rubber specifically formulated for the manufacture of molded articles. The cured articles are known for their high transparency and excellent tear resistance. This fast-curing silicone rubber also exhibits remarkable tear resistance properties. The addition cure process enables a significantly faster vulcanization reaction compared to peroxide curing materials.
Wacker Chemie AG
ELASTOSIL® LR 3070/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals
Features:
Cost Effective, Good Electrical Properties, Fast Curing, Good Mechanical Properties, Good Adhesion, Pigmentable
Tear Strength:
20.0 - 20.0 kN/m
ELASTOSIL® LR 3070/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3070 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3003/05 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, General Purpose
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:
8.0 - 8.0 kN/m
ELASTOSIL® LR 3003/05 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® R Plus 4305/40
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Heat Stabilized, Food Contact Acceptable, Fast Curing, Good Mechanical Properties, High Consistency, Low Compression Set, Excellent Transparency Properties
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® R Plus 4305/40 is a two-component, high-consistency silicone rubber designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
LUMISIL® LR 7601/80 A/B
Processing Methods:
Injection Molding
End Uses:
Lighting Applications, Lighting Fixtures, Automotive Components
Features:
Low VOC, Excellent Transparency Properties, Heat Resistance, Good Electrical Properties, Low Fogging, Excellent Dimensional Accuracy, Good Mechanical Properties, Medium Viscosity, Low Shrinkage, Consistent High Quality, Food Contact Acceptable, UV Resistant, Low Volatility, Fast Curing, High Optical Transparency
Tear Strength:
9.0 - 9.0 kN/m
LUMISIL® LR 7601/80 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The vulcanizates obtained from this material are known for their exceptionally high optical transparency, as well as their outstanding mechanical and electrical properties.
Wacker Chemie AG
SILMIX® M70 White
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
Tear Strength:
29.75 - 29.75 kN/m
SILMIX® M70 White is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are recognized for their good flexibility and mechanical properties. SILMIX® M70 White is designed for fabricating molded articles. Moreover, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
Wacker Chemie AG
ELASTOSIL® LR 3092/65 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals, Gaskets
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Very Good Heat Resistance, Low Compression Set, Low VOC, Cost Effective, Heat Resistance, Heat Stabilized
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® LR 3092/65 A/B is a paste-like, two-component liquid silicone rubber with short curing times. The vulcanizates are noted for good mechanical properties and excellent heat resistance within a temperature range of -55°C to +210°C, and for a short time up to 300°C. Low compression sets can be achieved after post-curing.
Wacker Chemie AG
ELASTOSIL® LR 3066/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
31.0 - 31.0 kN/m
ELASTOSIL® LR 3066/50 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3071/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Good Mechanical Properties
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® LR 3071/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3071 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3841/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized, Low Volatility
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® LR 3841/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3841 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
SILPURAN® 6760/50 A/B
Processing Methods:
Injection Molding
End Uses:
Medical/Healthcare Applications, Medical Devices
Features:
Pigmentable, Low VOC, Good Electrical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Low Coefficient of Friction, Excellent Surface Properties, Good Mechanical Properties
Tear Strength:
27.0 - 27.0 kN/m
SILPURAN® 6760/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties to various substrates combined with a low coefficient of friction. SILPURAN® 6760/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® LR 5040/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Bathroom Accessories, Medical Devices
Features:
Low Volatility, Fast Curing, Excellent Productivity, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Food Contact Acceptable
Tear Strength:
13.0 - 13.0 kN/m
ELASTOSIL® LR 5040/50 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/50 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
Wacker Chemie AG
ELASTOSIL® LR 3071/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Good Mechanical Properties
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® LR 3071/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3071 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3846/20 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized
Tear Strength:
16.0 - 16.0 kN/m
ELASTOSIL® LR 3846/20 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.
Wacker Chemie AG
ELASTOSIL® LR 3004/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Heat Stabilized, Food Contact Acceptable
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3004/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
POWERSIL® 732 CS A/B
Processing Methods:
Injection Molding
End Uses:
Cables, Cable Accessories, Wires
Features:
Tracking Resistant, Pigmentable, Good Weather Stability, Cold Shrinkable, Good Electrical Properties, Outdoor Durability, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Good Processability, UV Resistant, Excellent Dielectric Properties, Easier Processing
Tear Strength:
35.0 - 35.0 kN/m
POWERSIL® 732 CS A/B is a two-component, liquid silicone rubber that offers excellent processing properties. The resulting vulcanizates exhibit exceptional mechanical and electrical properties. This product is specifically designed for cold-shrink applications and provides excellent dielectric properties. It is highly suitable for outdoor applications, offering UV and weathering resistance as well as excellent hydrophobic properties.
Wacker Chemie AG
SILMIX® E40 Gray
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
SILMIX® E40 Gray is a compound used for fabricating vulcanizates that display a distinct combination of characteristics. These vulcanizates are well-regarded for their favorable flexibility and mechanical properties. SILMIX® E40 Gray is specifically formulated for the production of extruded articles. Furthermore, post cured parts made from this compound can be safely utilized in food contact applications and are deemed suitable for use under the recommendation "XV."
Wacker Chemie AG
ELASTOSIL® R Plus 4360/60 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Hoses, Tubes, Cables
Features:
Tear Resistance, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Elasticity, Good Mechanical Properties, High Consistency
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® R Plus 4360/60 MH is a two-component, high consistency silicone rubber specifically designed for the manufacture of extruded articles. The vulcanizates produced using this silicone rubber exhibit excellent elasticity (rebound resilience) and demonstrate good tear resistance. In comparison to other platinum curing grades like the ELASTOSIL® R plus 4305 series, ELASTOSIL® R Plus 4360/60 MH showcases improved physical resistance.
Wacker Chemie AG
ELASTOSIL® R Plus 4285/30
Polymer Name:
Silicone Elastomer
End Uses:
Catheter Balloons
Features:
High Consistency, High Elongation
ELASTOSIL® R Plus 4285/30 is designed for the production of molded articles, particularly catheter balloons, that exhibit high elongation and low tension set. This addition-curing, two-part compound is composed of HCR silicone rubber. The vulcanizates of ELASTOSIL® R Plus 4285/30 demonstrate excellent transparency and good to very good mechanical properties.
Wacker Chemie AG
ELASTOSIL® R Plus 4070/20 MH
Polymer Name:
Silicone Elastomer
End Uses:
Automotive Components
Features:
High Consistency, Heat Stabilized
Tear Strength:
35.0 - 35.0 kN/m
ELASTOSIL® R Plus 4070/20 MH is a one-component, addition-curing silicone rubber that is specifically designed for the manufacture of molded articles. It exhibits self-bonding properties, eliminating the need for additional adhesive agents. This silicone rubber is particularly suitable for applications that require vibration damping capabilities.
Wacker Chemie AG
ELASTOSIL® R Plus 4305/30
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Heat Stabilized, Food Contact Acceptable, Fast Curing, Good Mechanical Properties, High Consistency, Low Compression Set, Excellent Transparency Properties
Tear Strength:
43.0 - 43.0 kN/m
ELASTOSIL® R Plus 4305/30 is a two-component, high-consistency silicone rubber designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
ELASTOSIL® M 4503
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Good Flow, Room Temperature Vulcanizing, Low Hardness, Good Mechanical Properties, Excellent Flowability, Excellent Elasticity, Pourable, Long Potlife
Tear Strength:
20.0 - 20.0 kN/m
ELASTOSIL® M 4503 is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It possesses several key features, including good flow and high resistance to casting resins, particularly polyesters. The main application of ELASTOSIL® M 4503 is in making cost-effective molds, particularly well-suited for PE resins.
Wacker Chemie AG
ELASTOSIL® Vario 15
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Long Shelf Life, Room Temperature Vulcanizing, Translucent, Good Shrinkage Resistance, High Tensile Strength, Flexible, Good Mechanical Properties, Low Shrinkage, Food Contact Acceptable, Low Hardness, Good Tear Strength, Fast Curing, Easier Processing, Low Viscosity, Excellent Flowability, High Elongation, Pigmentable, Low Density
ELASTOSIL® Vario 15 is a pourable, two-component silicone rubber that vulcanizes at room temperature through addition-curing. It can be blended with ELASTOSIL® VARIO 40 to achieve a desired hardness ranging between 15 and 40 Shore A. This versatile silicone rubber finds applications in prototype molding and reproduction molding.
Wacker Chemie AG
ELASTOSIL® LR 3003/85 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, General Purpose
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 3003/85 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3011/50 FR A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Automobile Door Seals
Features:
Low Volatility, Fast Curing, Low Flammability, Flame Retardant, Low Compression Set, Low VOC, Cost Effective, Heat Resistance
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® LR 3011/50 FR A/B is a liquid silicone rubber. It is a paste-like, low-inflammable, two-component compound. The excellent flame retardancy is confirmed by UL94-V0 listings at 0.75 mm and 3 mm thickness. Good heat resistance, low compression set, short curing times, and non-abrasive behavior in the LIM process are further benefits of this material.
Wacker Chemie AG
ELASTOSIL® R Plus 4305/80 US
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Tear Resistance, Food Contact Acceptable, Good Mechanical Properties, High Consistency, Excellent Transparency Properties
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R Plus 4305/80 US HCR silicone rubbers are addition-curing, two-part compounds (batch grades). The vulcanizates of these silicone rubbers exhibit excellent transparency and good to very good mechanical properties. ELASTOSIL® R Plus 4305/80 US is specifically designed for the fabrication of extruded articles that require high transparency and very good tear resistance values.
Wacker Chemie AG
ELASTOSIL® R 401/30 OH US
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Injection Molding, Transfer Molding
End Uses:
Door Profiles, Profiles, Medical/Healthcare Applications
Features:
High Flexibility, Translucent, Good Mechanical Properties, Excellent Mechanical Strength, Good Moldability, High Clarity, High Consistency, Excellent Transparency Properties
Tear Strength:
22.75 - 22.75 kN/m
ELASTOSIL® R 401/30 OH US is a colorless, translucent silicone rubber base noted for its flexibility, high transparency, and good mechanical properties. Its vulcanizing characteristics make it possible to achieve rubber moldings by compression, transfer, and injection molding. Post-cured vulcanizates can be used for applications in the health care and food handling industries.
Wacker Chemie AG
ELASTOSIL® LR 3004/70 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Heat Stabilized, Food Contact Acceptable
Tear Strength:
23.0 - 23.0 kN/m
ELASTOSIL® LR 3004/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3843/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility
Tear Strength:
22.0 - 22.0 kN/m
ELASTOSIL® LR 3843/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
SILMIX® E40 Red
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
Tear Strength:
23.625 - 23.625 kN/m
SILMIX® E40 Red is a compound used for fabricating vulcanizates that exhibit a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® E40 Red is specifically designed for fabricating extruded articles. Moreover, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
Wacker Chemie AG
ELASTOSIL® LR 3093/65 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals
Features:
Fast Curing, Good Mechanical Properties, Very Good Heat Resistance, Low Compression Set, Low VOC, Heat Resistance, Heat Stabilized, Low Volatility
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3093/65 A/B is a paste-like, two-component compound of liquid silicone rubber with short curing times. The vulcanizates are noted for good mechanical properties and excellent heat resistance within a temperature range of -55°C to +225°C, and for a short time up to 300°C. Outstanding ultra-low compression sets can be achieved after post-curing for 4 hours at 210°C.
Wacker Chemie AG
ELASTOSIL® R 416/70 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Calendering
End Uses:
Turbocharger Hoses, Turbo Charger Hose, Tubes, Exhaust Duct Systems, Profiles, Hoses
Features:
Cost Effective, Non Stick, Dimensional Stability, Heat Stabilized, Good Green Strength, High Consistency
Tear Strength:
32.0 - 32.0 kN/m
ELASTOSIL® R 416/70 MH is a peroxide-curing, high-consistency silicone rubber with very high green strength, which enhances calendaring and extrusion performance significantly. Uncured extruded hoses show high dimension stability and a non-sticky surface. The addition of heat stabilizers at service temperatures of more than 180°C is recommended.
Wacker Chemie AG
SILPURAN® 6000/20 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Medical/Healthcare Applications, Gaskets, Valves, Medical Devices, Connectors
Features:
Fast Curing, Excellent Surface Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Good Electrical Properties, Good Mechanical Properties, Excellent Mechanical Strength, Food Contact Acceptable, Low Volatility
Tear Strength:
21.0 - 21.0 kN/m
SILPURAN® 6000/20 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/20 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® LR 3003/03 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, General Purpose
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:
3.0 - 3.0 kN/m
ELASTOSIL® LR 3003/03 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3070/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Bathroom Accessories, Automobile Door Seals
Features:
Cost Effective, Good Electrical Properties, Fast Curing, Good Mechanical Properties, Pigmentable
Tear Strength:
23.0 - 23.0 kN/m
ELASTOSIL® LR 3070/60 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3070 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.
Show
36
of 1,645 results
Go to page
1
2
3
4
5
6
7
8
9
10