Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Specific Features
- Addition Curing
- BfR compliant
- FDA compliant
- Flowable
- Food-contact
- Low viscosity
- No chemical shrinkage
- Two-component
Applications & Uses
- Markets
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- Prototype Molding
- Reproduction Molding
- Application Details
Due to its resistance to all common reproduction materials. e.g. casting resins, concrete, plaster, as well as the mechanical properties, ELASTOSIL® VARIO 15 is especially suitable for all molds. As a low Shore A addition silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® VARIO 15 is also suitable if absolutely accurate copies of models are required.
Properties
- Color
- Physical Form
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- Two base components, two catalysts
- Easy to process because of low viscosity
- Fast and non-shrink cure at room temperature, adjustable over a wide range
- Low hardness 15 Shore A
- High elongation, outstanding tensile strength
- Excellent tear strength
- Cured rubber is translucent and colorless
- Can be pigmented with 1 - 4 % ELASTOSIL®
- Pigment Pastes FL
Value | Units | Test Method / Conditions | |
Demoldable with ELASTOSIL® Catalyst VARIO (at 23°C) | 6 | hours | — |
Demoldable with ELASTOSIL® Catalyst VARIO F (at 23°C) | 15 | minutes | — |
Dynamic Viscosity (at 23°C) | 3 | mPa·s | ISO 3219 |
Mix Ratio (with ELASTOSIL® Catalyst Vario or Catalyst Vario F) | 10:1 | parts by weight | — |
Pot Life (at 23°C, up to 100000 mPa.s, Catalyst Vario F) | 2 | minutes | DIN EN ISO 2555 |
Pot Life (at 23°C, up to 100000 mPa.s, Catalyst Vario) | 150 | minutes | DIN EN ISO 2555 |
Value | Units | Test Method / Conditions | |
Density (in water, at 23°C) | 1.06 | g/cm³ | DIN EN ISO 1183-1 A |
Elongation (at break) | 900 | % | ISO 37 Type 1 |
Shore Hardness A | 15 | — | DIN ISO 48-4 |
Tear Strength | 15 | — | ASTM D 624 B |
Tensile Strength | 6.5 | N/mm² | ISO 37 Type 1 |
Value | Units | Test Method / Conditions | |
Density (at 23°C) | 1.06 | g/cm³ | DIN EN ISO 2811-1 |
Dynamic Viscosity (at 23°C, stirred) | 5 | mPa·s | ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Notes
ELASTOSIL® VARIO 15 contain only constituents that over many years have proved to be neither toxic nor aggressive. Special handling precautions are therefore not required, i.e., only the general industrial hygiene regulations apply.
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
- 15, 5 KG CANISTER
- 15, 20 KG HOBBOCK PE
- 15, 200 KG DRUM SB
Storage & Handling
- Storage Information
ELASTOSIL® VARIO 15 should be stored between 5 °C and 25 °C in the tightly closed original container. The 'Best use before end' date of each batch appears on the product label.