Products in Other Specialty Elastomers

DLR Elastomer Engineering Ltd Polyacrylic 70 is known for its resistance to hot hydraulic oil and oxidation. It is also resistant to ozone and weathering and in these respects it is much superior to nitrile rubber. Polyacrylic has very low resilience below 70°C and has found use in vibration damping.Acid ResistantAlkali ResistantGood Weather StabilityLow ResilienceOil ResistantOxidation ResistantOzone ResistantVibration DampingWater Resistant

Jilin Xingyun Chemical (Jilin Chemical Group) CSM-45 Grade I is chiefly applied in making of high rigidity products, such as plastic carpet, waterproof roof, shoe sole and sponge insole.

Jilin Xingyun Chemical (Jilin Chemical Group) CSM-20 Grade I finds a good application in coatings of soft materials and adhesive products, and the best one is of gum latex.

Brandonite® 1310-70A contains features such as Excellent lubricity and run-dry capacity for 15 minutes.

Poolkemie POLIMOLD HRP 40 is a Complex mold used in Serial reproduction of cement, plaster large sized products.

Poolkemie POLIMOLD HR 40 is a two component room temperature vulcanising fluid rubber which cures after addition and mixing with the appropriate catalyst: it produces an elastic and tenacious mass, free from bubbles and imperfections; it has a good stability to hydrolysis, very good mechanical resistance, is easy to demould and has a percent shrinkage approx. = 0. Poly-urethane rubbers of POLIMOLD HR series, once cured, have a light superficial greasiness caused by proper release agents in order to favor demoulding operations.

HY60 is a csm rubber sheet.

Ecopower Chemical CSM45 is Chlorosulfonated Polyethylene is a kind of white or yellowish elastomer in round chip with not only the same properties as base polymer but also special properties of itself. It’s soluble in aromatic hydrocarbon and hydrochloric ether, insoluble in fatty hydrocarbon and alcohol, only swells but not be soluble in ketone and ether. It has excellent ozone resistance, atmospheric aging resistance, chemical resistance, etc., also has better physical mechanical features, heat aging resistance, heat endurance, subzero resistance, fuel resistance, abrasion resistance and electrical insulation.

Dynacast Industrial Products Epichlorhydrin Rubber - CSM has good oil, low temperature resistance. ECO also has good resistance to hydrocarbon solvents combined with moderate low temperature flexibility, poor abrasion resistance and electrical properties.

Jilin Xingyun Chemical (Jilin Chemical Group) CSM-30 Grade I is primely applied in coatings of ebonite compounds, in addition to anti-corrosion coatings of inside and outside walls of plants and equipment under acidic and alkali conditions, because of its anti weather and aging characteristics and acid-proof, alkali-proof and solvent-proof properties.

SYNTHETIC RUBBER MCSM® is a modified chlorosulfonated polyethylene rubber, its airtightness is equivalent to halogenated butyl rubber, oil resistance is better than nitrile rubber, and has excellent aging resistance and high temperature resistance, and various types of rubber Olefin rubber has excellent compatibility. Mainly used for tire sealing layer and rubber products such as oil resistance, high temperature resistance and weather resistance. When used in tire sealing layer, it can be substituted for bromobutyl rubber. Due to its slow curing speed, it is generally recommended to replace 5-10 parts. The combined use of modified chlorosulfonated polyethylene rubber can significantly improve the processing performance of the rubber material and increase the air tightness of the rubber material.

Dynacast Industrial Products Chlorosulfonated Polyethylene Rubber - CSM has good heat, weather and ozone resistance with low gas permeability. CSM is used often for protective coatings.

Poolkemie POLIMOLD HF 35 is a Complex mold used in Serial reproduction of cement, plaster medium/large sized products.

Airex Rubber Products A-4733 is an FDA-Approved grit blast elastomer formulation that meets the requirements of CFR 177.2600 for rubber articles that are intended for repeated use. In addition, this compound has proven to be non-toxic in cytotoxicity testing. It is a 70-durometer compound with a minimum tensile strength of 3200 PSI and a minimum elongation of 400%. Intended for the medical industry where high abrasion resistant masking is required.

KRAIBURG CO / ECO is a epichlorhydrin rubber is used applications such as seals, membranes, hoses and roller coatings. Used primarily in applications requiring good resistance to mineral oils and heat in combination with low gas permeability or good low temperature flexibility.

Poolkemie POLIMOLD TR 55 is a two component room temperature vulcanising poly-urethane rubber which cures with addition of the appropriate hardener. Once cured, this rubber becomes flexible and resistant, free from air bubbles and imperfections. It is suitable in the manufacture of molds for production of articles made of plaster and cement thanks to its accurate reproduction of fine details and due to its extremely low linear shrinkage.

Poolkemie POLIMOLD TR 40 is a two component room temperature vulcanising poly-urethane rubber which cures with addition of the appropriate hardener. Once cured, this rubber becomes flexible and resistant, free from air bubbles and imperfections. It is suitable in the manufacture of molds for production of articles made of plaster and cement thanks to its accurate reproduction of fine details and due to its extremely low linear shrinkage.

Poolkemie POLIMOLD HRP 25 is a two component room temperature vulcanising fluid rubber which cures after addition and mixing with the appropriate catalyst: it produces an elastic and tenacious mass, free from bubbles and imperfections; it has a good stability to hydrolysis, very good mechanical resistance, is easy to demould and has a percent shrinkage approx. = 0. Poly-urethane rubbers of POLIMOLD HR series, once cured, have a light superficial greasiness caused by proper release agents in order to favor demoulding operations.

Poolkemie POLIMOLD HRP 30 is a Complex mold used in Serial reproduction of cement, plaster medium/large sized products, PU rubbers molds and Concrete rubbers mold.

CSM 40 rubber is a kind of white material which turns to light yellow or brown, tasteless evenly rubber-shape, and it has the mutual character with rubber which also has its own property. 2. It is non-toxic, non-explosive, open flame burning, auto-extinction after remove. 3. It has excellent ozone resistance, resistance to atmospheric aging, chemical resistance, better physical mechanical, thermal aging resistance and low temperature resistance (-20℃-12℃), oil resistance, flame resistance, abrasion resistance and electrical insulation etc.

Airex Rubber Products A-2620 Water Resistant Rubber is specially formulated for use in applications involving continuous and periodic immersion in both hot and cold water.

A red/brown high performance polymer containing a unique self- reinforcing polymer structure, developed specifically for aggressive semiconductor applications. The high purity of the polymer combined with the absence of any fillers makes this polymer suitable for processes involving lower feature sizes. This material has a low coefficient of thermal expansion, low compression set and has an extremely low etch rate in aggressive plasma environments.Key Attributes Exceptionally pure - does not contain any fillers which may cause particulation problems. Outstanding plasma resistance - ideal for Chlorine, Fluorine & Oxygen chemistries. Exceptionally low plasma etch rate Low thermal expansion Retro-fits existing O-ring grooves (including FKM & FFKM grooves) Low permeation Low out-gassing Low adhesion (reduced sticking) Typical Applications Dynamic seals Static seals Wafer-handling products

Jilin Xingyun Chemical (Jilin Chemical Group) CSM-40 Grade I is mainly applied in cables’ insulating sheathes and cables’ jackets, surpassing CSM-20 in aspects of grease-proof, deformation-proof, anti-breaking, anti-abrasion and acid-proof.

Poolkemie POLIMOLD HR 30 is a two component room temperature vulcanising fluid rubber which cures after addition and mixing with the appropriate catalyst: it produces an elastic and tenacious mass, free from bubbles and imperfections; it has a good stability to hydrolysis, very good mechanical resistance, is easy to demould and has a percent shrinkage approx. = 0. Poly-urethane rubbers of POLIMOLD HR series, once cured, have a light superficial greasiness caused by proper release agents in order to favor demoulding operations.

Poolkemie POLIMOLD HF 25 is a Complex mold used in Serial reproduction of cement, plaster medium sized products. High fluidity, elasticity and mechanical strength, low specific gravity, very small linear shrinkage. Suitable for realization of molds to produce cement and plaster products, decorative garden articles, rosettes, cornices, religious and decorative goods.

Poolkemie ELASTOPUR E 70 is a Mold Subjected to High Mechanical Strength, it's used in Production case mold for ceramic and sanitary fixtures.

Poolkemie POLIMOLD HR 25 is a two component room temperature vulcanising fluid rubber which cures after addition and mixing with the appropriate catalyst: it produces an elastic and tenacious mass, free from bubbles and imperfections; it has a good stability to hydrolysis, very good mechanical resistance, is easy to demould and has a percent shrinkage approx. = 0. Poly-urethane rubbers of POLIMOLD HR series, once cured, have a light superficial greasiness caused by proper release agents in order to favor demoulding operations.

Poolkemie ELASTOPUR E 90 is a Mold Subjected to High Mechanical Strength, it's used in Production case mold for ceramic and sanitary fixtures.

Poolkemie POLIMOLD NT 25 is used in Polyurethane rubber for mold making.and it's Complex mold have applications in Serial reproduction of rubber Technical Articles, cement, plaster medium sized products.

KRAIBURG CSM is a chlorosulfonated polyethylene used applications such as cable sheathings, linings, seals, membranes, floor coverings, roofing felts, rubber-coated fabrics.

M2 Polymer Technologies SAP Cubes (Super Absorbent Polymer) are these amazing little growing water cubes of super-absorbent polymer swell up to the size of clear ice cubes when soaked in distilled water overnight.

Precision Associates inc. 14540 is 50 durometer black Chlorosulfonated Polyethylene elastomer for general purpose.

A brown colored high performance polymer containing a unique self- reinforcing polymer structure, developed specifically for aggressive semiconductor applications. The high purity of the polymer combined with the absence of any fillers makes this polymer suitable for processes involving lower feature sizes. This material has a low coefficient of thermal expansion, low compression set and has an extremely low etch rate in aggressive plasma environments.Kimura® K23X can be fully molded into custom shapes and O-rings (from 6.07mm/0.24" ID & 1.78mm/0.07" CS up to 600mm/23.6" ID & 10mm/0.39" CS).Key Attributes Exceptionally pure - does not contain any fillers which may cause particulation problems. Low modulus ensures excellent sealing characteristics Outstanding plasma resistance - ideal for Chlorine, Fluorine & Oxygen chemistries. Exceptionally low plasma etch rate Low thermal expansion Retro-fits existing O-ring grooves (including FKM & FFKM grooves) Low permeation Low out-gassing Low adhesion (reduced sticking) Typical Applications Dynamic seals Static seals Wafer-handling products

Poolkemie POLIMOLD NT 40 is used in Polyurethane rubber for mold making and it's Complex mold have applcations in Serial reproduction of rubber Technical Articles, cement, plaster medium - large sized products.

The chemical structure of Chlorosulfonated Polyethylene is a fully saturated backbone. CSM has excellent ozone resistance, atmospheric aging resistance chemical resistance, ionizing radiation resistance and color stability, good mechanical properties, thermal aging resistance, low temperature resistance, flame resistance, abrasion resistance and electrical insulation function.