Products in Fluids & Lubricants: Oxidation Resistant

K-CORR® G-1360 is a proprietary zinc based rust inhibitor system developed for specialty grease applications as a replacement for zinc naphthenate.

Biocea™ I deliver superior lubricity, film strength, biostability, hydrolytic stability, oxidation stability, and increased polarity on both ferrous and non-ferrous alloys. They are derived from natural oils and improve the overall quality of formulated metalworking fluid while being sustainable and environmentally friendly. Biocea additives are known to increase productivity, reduced waste and down time, and lower cost in your overall manufacturing operation.

VBASE® 68S base oil provides exceptional hydrolytic stability, efficiency, and compatibility to enable the formulation of high-performance Environmentally Acceptable Lubricants (EALs). VBASE Oil is based on new Secondary Polyol Ester™ technology.Increased System Efficiency - High Viscosity Index and High Shear Stability Enable Reduced Flow Losses and Viscous Drag Enhanced Fluid Lifetime and Reliability - Excellent Thermo-Oxidative Stability, Varnish Resistance, and Hydrolytic StabilitySuperior Compatibility - Compatible with all major base oils and sealsEnvironmentally Acceptable - Biobased, Biodegradable, Non-Toxic, Non-bioaccumulatingUSDA Certified Biobased, NSF HX-1: Safe for food contact

CALSOL™ 5550 is an ideal choice whenever the balance of hardness and color stability is critical. For example: thermoplastics, radial and styrene elastomers.

LUBIMAX® PIB 4200 is a member of the LUBIMAX® PIB series of polyisobutenes. LUBIMAX® PIB 4200 is colorless, chemically inert, nondrying and highly resistant to oxidation and photo-degradation. This range of products is non-toxic and will not leave residue post volatilization or thermal decomposition.

LUBIMAX® 5524 is a shear stable amorphous olefin copolymer intended to be used as a Viscosity Index Improver when formulating multi-grade crankcase and industrial oils. This viscosity modifier combines excellent viscometric effectiveness with high oxidation stability. LUBIMAX® 5524 has very good low temperature properties when combined with a suitable pour point depressant.

NA-LUBE® KR-029 FG is a specialty Food Grade base oil modifier for high performance lubricants and greases offering excellent hydrolytic, thermo-oxidative stability, and solubility. It is recommended for higher temperature applications.

LUBIMAX® PIB 1700 is a member of the LUBIMAX® Polyisobutene Series. LUBIMAX® PIB 1700 is colorless, chemically inert, non-drying and highly resistant to oxidation and photodegradation. This product range is non-toxic and will not leave residue post volatilization or thermal decomposition.

LUBIMAX® PIB 2400SA is a member of LUBIMAX® Polyisobutene Series. LUBIMAX® PIB 2400SA is colorless, chemically inert, non-toxic, non-drying and highly resistant to oxidation and photodegradation. This product range is non-toxic and will not leave residue post volatilization or thermal decomposition.

LUBIMAX® AW 1188 is a C8 Primary Zinc Dialkyldithiophosphate (ZDDP) anti-wear additive toformulate diesel and gasoline crankcase lubricant oils with suitable base stocks. It has an excellent protection against corrosion, oxidation and wear in internal combustion engine components. LUBIMAX® AW 1188 additive is also recommended for use in industrial fluids and greases.

NA-LUBE® KR-006FG is a specialty HX-1 approved food grade base oil modifier for high performance lubricants and greases offering outstanding solubility plus excellent hydrolytic and thermo-oxidative stability.

Finechem Technology FC6110 Nano-boron Rare Earth Gear Oil Complex Agent for Super-heavy Load Vehicles is synthesized from nano-boron rare earth multi-effect agent, Sulfur-phosphorus extreme pressure anti-wear agent, nano-boron ceramic friction modifier, phenol amine high-temperature antioxidant, metal deactivator and carboxylic ester compound antirust agent. It is a kind of S-P-N-B fourth generation of energy-saving, emission-reduction and super-heavy load gear oil complex agent. The largest shortcoming of the third generation of S-P gear oil complex agent is that the sulfur content must be increase if the sintering load is to be improved; the higher the value of PD is, the higher the amount of sulfur will be; the more the active sulfur is, the more serious the gear surface pitting will be; and the more concentrated the odor of the sulfur oxides is, the more serious the harm to the human health and the environment will be.

Finechem Technology FC6108 Universal Gear Oil Complex Agent is prepared with hydrolysis-resistant nano calcium borate multi-effect additive, half the usual amount of sulfurized olefin extreme pressure agent, nitrogen phosphorus anti-wear agent, nano ceramic friction modifier, phenol amine antioxidant, metal deactivator and antirust agent. It is a kind of half energy-saving and emission-reduction gear oil complex agent transitioning from SP third generation to SPNB fourth generation. Compared with traditional S-P agents, the product is of higher load capacity, smaller wear scar diameter, lower friction, higher convey efficiency, better thermal oxidation stability, longer pitting life and sealing material durability, and more significant fuel-efficient and energy-saving effect.

DAKOLUB® MB 9010 is a Decyloleate chemical compound

KVIS 200 is the trade name of Kothari’s polyisobutylene with molecular weight ranging from 2300 to 2500. KVIS 200 possesses high shear stability and oxidative stability, which makes it the most suitable grade for speciality lubricants and grease. Explore here to see how our KVIS 200 is ideally suited as a high molecular weight dispersant, oil additive, thickener or even tackifier.

Biobase Sweden AB BIO-BASE 10 is a renewable alternative to low viscosity mineral base oils. Solvency, oxidation stability, and evaporation loss equivalent to naphthenic base oils.

DAKOLUB® MB 9038 Is a 2-Hexyldecyloleate chemical compound

SungateKuvan 484 is a premium version of metal deactivator, it has excellent metal deactivating property and corrosion inhibiting property as well as good EP performance, it is widely used in engine oil, AW hydraulic pressure oil, industry gear oil, grease and compressor oil etc. It is light yellow transparent liquid. It has excellent AO and copper corrosion inhibiting properties, especially in AW hydraulic pressure, it can greatly decrease copper corrosion caused by ZDDP. It’s can also work as ashless EP and AO additive used in grease.

Finechem Technology FC6016 Tasteless Gear Oil Complex Agent product is a new generation of S-P-N-B energy-saving and environment-protection universal gear oil complex agent, it is prepared with hydrolysis-resistant nano calcium borate multi-effect additive, S-P extreme pressure anti-wear agent, nano-boron ceramic friction-reduction agent, phenol amine antioxidant and metal deactivator. Compared with the traditional S/P agents, the product is characterized with high load capacity, good wear resistance, low balance oil temperature, small friction resistance, long oil change mileage, energy saving and environmental protection. Because of the thick oil film and the elasticity, the product not only is resistant to high-speed impact load but also and adapts to the high torque working conditions. The addition of borate achieves better corrosion resistance, largely extends the life of gear surface pitting and the seal, and ensures low toxicity and zero odors.

Finechem Technology FC58116 High-grade diesel engine oil complexing agent is made of nano calcium borate multi-effect agent with hydrolytic resistance, nano boron ceramic, compound detergent, ash less dispersant, long chain ZDDP antioxidant anticorrosion agent, high temperature phenolic amine antioxidants, metal attenuated agent and organic boron anti-friction. It belong s to energy conservation and environmental protection wood oil compound having features of low phosphorus, low ash, low consumption and low emissions. Compared with traditional agent, it not only focuses on turbocharging, high-temperature oxidation caused by exhaust gas recirculation (ECR) and influence of wear corrosion on oil and engine, but also pays attention to nitric oxide for new emission standard, requirement of further reducing particulate matter and fuel consumption as well as valve wear caused by ultra-low-sulfur diesel. Therefore, nano boron ceramic having the function of being able to fine running-in and repair itself and organic boron anti-friction and fuel oil additive are added. Dispersed, high temperature oxidation resistance, anti wear and friction reducing friction and good corrosion resistance and seal adaptability with good detergency, effectively inhibit the engine deposit formation, control of high temperature oxidation and corrosion, reduce the temperature balance and prolong the machine oil and the service life of the components, and significantly reduce friction and energy saving, emission reduction effect of reducing pollution. The product performance can reach or exceed the level of the import compound agent, can significantly reduce the cost of the product.

LubBase® 4 cSt is a Group III oil that is refined from petroleum using advanced hydrocracking techniques. We transform crude oil molecules into water-white base oils that are almost completely free of aromatics, polar compounds, and sulfur. Some of the more advanced oils use a catalytic de-waxing process to create a highly pure product.

Coolsurf RCO-70 is an amide resulting from the reaction of diisopropanolamine and a vegetable oil rich in oleic acid.

DAKOLUB® MB 9001 is a Methyloleate chemical compound.

Finechem Technology FC58206 low-ash internal combustion engine oil complexing agent for gasoline engine is made of nano calcium borate multi-effect agent with hydrolytic resistance, metal detergent, ash less dispersant, a little of ZDDP antioxidant anticorrosion agent, high temperature phenolic amine antioxidants and metal deactivator etc. It belongs to engine oil compound for gasoline engine and diesel engine use featuring low phosphor, low sulfur, low ash, emissions reduction, energy conservation and environmental protection. Compared with traditional compound, it has the characteristics of greater low temperature dispersion, high temperature oxygen resistance, high and low temperature rust protection and excellent anti-wear friction antifriction. To reduce ash content of sulfate, though total base value is not high, it can effectively control formation of sludge with less crankcase sediments. At the same time can reduce the bearing corrosion, wear and tear, oil oxidation, improve the friction parts, oil, seal, the durability of the exhaust system. Can improve the compatibility with the catalyst, prevent the three effect conversion device and oxygen sensor poisoning failure, reduce toxic gas emissions, improve fuel economy.

SungateHighTechnology 529 compound additive is used for blending high pressure, low Zinc AW hydraulic oil. It have excellent AW, EP properties and oxidation stability. oil drain interval can be prolonged obviously. It is used for blending low Zinc AW hydraulic oil

RB Products manufactures and supplies an extensive line of additive componentry products, which provide performance enhancements when added to a chosen base oil mixture. As part of our additive componentry offerings, we provide Alkyl Phenol 90%. Alkylphenol (90% para) is derived from propylene tetramer and phenol. RB Alkylphenol 90% is particularly suited for applications where high para isomer content is desired such as an oxidation inhibitor and as an intermediate for the preparation of lubricating oil additives, inhibitors, etc.

DAKOLUB® MB 9206 is 1,6-Hexanediyl dioleate a chemical compound

Finechem Technology FC58310 Motorcycle oil complexing agent is made of nano calcium borate multi-effect agent, boric acid ester, ash less dispersant and high-temperature phenolic amine antioxidants according to JASOT903 standard, having good miscibility with various oil, which is not only detergent-dispersant, of good antioxidant and anti-wear property, but also features low ash content, strong load capacity, good shear-resistant property, moderate coefficient friction, very suitable for 4T engine oil for use.

Finechem Technology FC7618 Ashless Anti-wear Hydraulic Oil Complex Agent is synthesized from organic boron anti-wear agent, phenol amine high-temperature antioxidant, antirust agent, metal deactivator and advanced synthetic ester. It is a kind of ash less anti-wear hydraulic oil complex agent and is non-corrosive to the plunger pump and systems containing silver and copper. The product is characterized with excellent extreme pressure and wear resistance, rust and corrosion resistance, thermal oxidative stability, seal compatibility and filtration performance, and can extend the service life of vanes, pistons, gears, cams and screw pumps.

Sungate Aw hydraulic oil compound additive SGAWH12 additive is light brown transparent liquid, widely used for blending AW hydraulic oil. It’s composed by excellent AW, AO, corrosion and rust inhibitor additives. It has outstanding AW, AO, demulsification properties. It can extend oil drain interval obviously.

Sea-Land Chemical SeacoChem ProHear Oil is an excellent lubricant and slip agent for metalworking fluids. This oil has excellent oxidative stability and low evaporation loss, low toxicity and low irritation and allergenicity, rapid biodegradability and increased lubricity compared to other vegetable oils.

SIPADD ZM200 is commodity additives for an extensive range of applications. It is used for cost-effective formulation to enhance the performance of oils and greases.

DAKOLUB® MB 9600 is a 2,2-Dimethyl-1,3-propandiyldioleate chemical compound

Finechem Technology FC58117 Energy-saving diesel engine oil complexing agent of nano boride rare earth is made of nano calcium borate multi-effect agent, nano anti-friction and anti-wear agent boron ceramics, low ash detergent, ash less dispersant, a little of ZDDP antioxidant anticorrosion agent, high temperature phenolic amine antioxidants and metal deactivator as well as cetane number improver etc. It belongs to multiple effect wood oil complexing agent with low sulfur phosphorus ash and energy saving and emission reduction, which can meet requirements of ACEA2010C-10 and 2010 A/B-10 high-end engine oil and API standards. The product can greatly improve the performance of extreme pressure, abrasive resistance, anti-friction and antioxidant anticorrosive, reduce the damage of sulfur, phosphorus and ash on the engine and exhaust devices. New type of hexadecyl improver is used in lubricating oil, which is a technological innovation, through it works instantly in cylinder wall, but it has the outstanding effect on improving burning of diesel engine, preventing flame retardant, saving fuel and reducing emissions. The Nano boron ceramic can improve finish of cylinder barrel and sealing of piston ring to increase engine power, which can achieve the purpose of more powerful, longer oil change period and higher fuel economy. The product performance can reach or exceed the level of the import compound agent, can significantly reduce the cost of the product.

SIPADD ZS100 is commodity additives for an extensive range of applications. It is used for cost-effective formulation to enhance the performance of oils and greases.

Coolsurf 2105 is a modified 2:1 amide of diethanolamine and TOFA.