Products in Construction Chemicals: Wall Putty

VINNAPAS® 536 ED is a versatile polymer dispersion based on vinyl acetate and ethylene with a high solid content. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength combined with increased flexural strength and good compatibility with inorganic fillers like CaCO3.

VINNAPAS® 538 ED is a surfactant-stabilized polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, formaldehyde donors, or alkyl phenol ethoxylate (APEO)-containing compounds. VINNAPAS® 538 ED is a medium-viscosity product that exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNAPAS® 540 ED (ULS) is a medium-viscosity polymer dispersion based on vinyl acetate and ethylene. VINNAPAS® 540 ED (ULS) is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The dispersion is characterized by high bonding strength due to its high Mw PVOH content.

Texicryl® 13-620 is an APEO free pure acrylic copolymer emulsion designed for use in the building and construction industry. The polymer offers improved adhesion to various substrates and superior elasticity to relevant mixtures. It is designed for use in flexible mineral sealings, crack-bridging systems, waterproof coatings, fillers, putties, polymer-modified cement and mortar based mixtures of all kinds.

H - EAGLE (850/50) is Homopolymer for water-resistant general-purpose wood glues, paper adhesives, floor, wall and ceiling adhesives. Suitable for emulsion puttyExcellent water-resistant adhesives.

ACMA 20 Calcium Carbonate is a high brightness calcium carbonate powder manufactured from high purity, very white limestone.

H - EAGLE (400/50) is Homopolymer for emulsion putty, high heat resistant fast setting wood glues, edge bonding and laminations of Formica to chipboard and joinery gluesEmulsion putty & heat resistance adhesives.

C - EAGLE (VV 40/50) is Vam versatate with high mechanical stability makes it suitable in the formulation of smooth and sand textured coatings, emulsion putties and other coatings. Excellent gloss in silk, gloss and semi-gloss paints. Good washability in a wide PVC range. APEO freeEconomic, high sheen, excellent workability for putty and textured coatings.

C - EAGLE (VM 86/55) is Vinyl acetate maleinate ester suitable in the formulation of water-based paints,smooth and sand textured coatings,emulsion putties and other coatings where the dispersion may be introduced at let down and mill base stages.High mechanical stability,textured coatings and putties.

Linseed Oil is obtained from the mature seeds of the flax plant, which belongs to the Linaceae family.

BRIOMICA® 82 is a dry-ground ultra-white fine mica powder.

Sil-cell® 35 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

MAILOSE™ MP 200K is hydroxypropyl methyl cellulose ether(HPMC) with high viscosity. Could be soluble in water to form a transparent solution. Widely used in dry mix mortar industry.

Sil-cell® 43 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

MAILOSE™ ME 150K is methyl hydroxyethyl cellulose ether(MHEC) with high viscosity. Could be soluble in water to form a transparent solution. Widely used in dry mix mortar industry.

Aktisil VM 56 is a sillitin Z 86 coated with vinyl silane.

Extendospheres® TG is our most versatile, general purpose hollow sphere grade. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

Ziegler & Co. Naturprodukte Perlite Microspheres is the multicellular, closed hollow spheres are produced from a volcanic raw material which is formed to a white, intert material with high volume by a special expansion process.

Dolomite 500# is a double carbonate of Magnesium and Calcium (CaCO3. MgCO3) Theoretically, it contains 21.7 MgO and 30.4 % CaCO3 and the remaining being CO2. How ever in nature much variation takes place in the composition. It is sedimentary origin and is supposed to have been formed due to alteration of Calcium Carbonate sediments or rocks, by seawater rich in magnesia.

MAILOSE™ MP 75K is hydroxypropyl methyl cellulose ether(HPMC) with medium viscosity. Could be soluble in water to form a transparent solution. Widely used in dry mix mortar industry.

MICA-SOFT® 15/12 W is a wet-ground silky pure mica fine powder.

SILFIT Z 91 is a Calcined product based on Sillitin Z 86.

MAISSEN RDP 707U is a redispersible polymer powder(RDP)produced by spray-drying special water-based emulsion, mostly based on vinyl acetate and ethylene. It dissolves in water easily and quickly forms emulsion.

Dolomite 400# is a double carbonate of Magnesium and Calcium (CaCO3. MgCO3) Theoretically, it contains 21.7 MgO and 30.4 % CaCO3 and the remaining being CO2. How ever in nature much variation takes place in the composition. It is sedimentary origin and is supposed to have been formed due to alteration of Calcium Carbonate sediments or rocks, by seawater rich in magnesia.

AKTISIL PF 777 is a SILLITIN Z 86 coated with alkyle silane.

Sil-cell® 32 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

Talc MP 25-38 is a fine-particle talc with high brightness, low surface area and oil absorption, and excellent Hegman fineness. It is used in a number of applications including: industrial and architectural coatings and primers; adhesives and sealants; and caulks and putties. It is low in abrasion, chemically inert and has a platy crystal shape that improves weatherability and reinforcement.

Sil-cell® 42 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

MAILOSE™ MP 150K is hydroxypropyl methyl cellulose ether(hpmc) with high viscosity. Could be soluble in water to form a transparent solution. Widely used in dry mix mortar industry.

Extendospheres® 200/600 is our largest-sized hollow sphere grade. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

Dolomite RF 240# is a double carbonate of Magnesium and Calcium (CaCO3. MgCO3) Theoretically, it contains 21.7 MgO and 30.4 % CaCO3 and the remaining being CO2. How ever in nature much variation takes place in the composition. It is sedimentary origin and is supposed to have been formed due to alteration of Calcium Carbonate sediments or rocks, by seawater rich in magnesia.

Sil-cell® 50 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

MICA-SOFT® 30 is a wet-ground silky pure mica small flakes.

Extendospheres® SG is our most versatile, general purpose hollow sphere grade. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

AKTISIL VM 56/89 is a SILLITIN Z 89 coated with Vinyl silane.