Products in Corrosion Inhibiting Pigments

Habicor® CS is a Silicate and phosphosilicate based anticorrosive pigment, Chemical Structure is Modified calcium phosphosilicate.

Habicor® Paste 21 chemical structure is strontium chromate (SrCrO4) in solvent naphtha light.

Kronphos PZ is a dehydrate of zinc phosphate designed for manufacture of the anti-corrosive paints, used in demanding environment. The zinc phosphate of the PZ brand has established itself as a reliable anti-corrosion product. High zinc content allows you to add a smaller amount of pigment to obtain excellent anticorrosive properties of your products. The tone luminosity of 99% confirms the purity of our product and enables one to use the antirust pigment of the PZ brand in more complex and responsible formulations of your production.

Wayncor™ 213 - Corrosion Inhibitive Pigment is a general purpose corrosion inhibitive pigment which demonstrates good stability and corrosion resistance in a wide variety of systems. Typical use level is between 3 – 7% total formula weight.

Hybricor™ 204 - Hybrid Corrosion Inhibitor Pigment is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr6+ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (< 20 micron) applications. It does not affect pot life of 2K systems. Use level varies by intended application requirements.

Kronphos CP is an inorganic white pigment; it is used in paintwork products to enhances anti-corrosion properties and adhesion strength. Thanks to the lamellar structure of the pigment particles, the barrier-layer effect of the coating is enhanced on the anodic area.

Habicor® Paste 180 chemical structure is strontium chromate (SrCrO4) in methyl n-amyl ketone.

Novinox®PZ02 is an organically modified basic Zinc phosphate developed to be more reactive than standard Zinc phosphate in PU and alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. The organic activator provides a higher solubility of the pigment in the initial stages of corrosion leading to a higher reactivity and protection.

Habicor® ZS is a Silicate and phosphosilicate based anticorrosive pigment. Chemical Structure is Modified zinc strontium phosphosilicate.

SNCZ Zinc Phosphate PZW2 is a corrosion inhibiting pigment suitable for a wide range of applications. It is an easily dispersed white powder with a low tinting strength. Thanks to its low solubility, Zinc phosphate PZW2 is compatible with a wide range of solvent and water based resins.

Habicor® CP 4295 is a Orthophosphates and Polyphosphates, Chemical Structure is Chromium(III) phosphate.

The Fine Zinc Powder FH 400 grade is highly recommended for Paints and Plating.

Novinox®ACE110 is a corrosion inhibiting pigment designed for coil coatings. It is a stable and easily dispersed white powder with a low tinting strength. Novinox®ACE110 has been developed as a non toxic and eco-friendly alternative to Strontium chromate for coil coatings. Compatible with PU and PE/melamine systems, Novinox®ACE110 gives excellent anticorrosive performance in coil coatings applied to HDGS, ZAM and CRS.

The Fine Zinc Powder LARVIK SUPER EXTRA grade is highly recommended for organic or inorganic paints.

Novinox®PAS is a corrosion inhibiting pigment suitable for a wide range of applications. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Novinox®PAS is suitable for a wide range of resins, both solvent and water based systems. Novinox®PAS is also an excellent alternative to Strontium chromate in coil coatings.

The Fine Zinc Powder 4P/32 grade is highly recommended for Paints and Plating.

The Fine Zinc Powder LARVIK STANDARD 7 grade is highly recommended for Paints and Plating.

Wayncor™ 229 - Corrosion Inhibitive Pigment is an effective multi-component, multi-phase synergistic corrosion inhibitor pigment. It is a chrome free product, and is compatible with all commercially available aqueous and solvent based resin systems. The recommended loading levels for water based systems and solvent based systems from 3 – 7% total formula weight.

Beijing Panxin Titanium R258 is the new developed top grade general type rutile titanium dioxide,which was produced on base of the vulcanization process quality control experience,also used the new innovated research fruit such as inorganic envelope,organic treatment,salt treatment,calcinations control,hydrolyze and product usage technology,it also used the advantage hue and size control technology,Zr Si Al,P inorganic envelope and new developed organic treat technology.

NiCHEM No. 3 Strontium Chromate is a corrosion inhibiting pigment for use in solvent and water based primer systems.