Products in Masterbatches: Polyethylenes (PE)

CONSTAB NC 00611 LL is a basic, strong nucleating agent that enhances stiffness in filled polymers. It serves as a nucleator for high-crystallinity PE applications and leads to improved shrinkage, tensile strength, and barrier properties in HDPE films.

CONSTAB BR 02017 LL enhances the barrier properties of films while lowering melt viscosity and increasing film stiffness. It serves as a barrier and viscosity modifier and is compatible with polyethylene (PE). This product is applicable in the printing and packaging market, particularly in food and beverage packaging and industrial and transport packaging.

CONSTAB SAB 06569 LD is a synergistic combination of additives that provides balanced antiblocking and fast slip properties when processing mlld-pe, plastomers, or pe-copolymers; avoids screw slip and blooming; and provides excellent printing and sealing properties in comparison to oleamide or erucamide.

Polyfil Inc’s PAC-0001FFLL-SP is a fluoropolymer-free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without buildup at low dosage levels. Benefits of PAC-0001FFLL-SP quality include reduction or elimination of melt fracture. Improvements are seen in the gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0001FFLL-SP complies with FDA and EU requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations.

Polyfil Inc’s PAC-0005FFLL-MWZ is an economical, fluoropolymer free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without build-up at moderate dosage levels. Benefits to PAC-0005FFLL-MWZ quality include reduction or elimination of melt fracture, die build-up, and gel formation. Improvements are seen in gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0005FFLL-MWZ complies with FDA requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations. The MWZ grade has a proprietary chemistry that is thermally stable at even higher temperatures than the MW, making the MWZ suitable for both blown and cast film applications.

Polyfil Inc’s PAC-0005FFLL-MW is an economical, fluoropolymer free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without build-up at moderate dosage levels. Benefits to PAC-0005FFLL-MW quality include reduction or elimination of melt fracture, die build-up, and gel formation. Improvements are seen in gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0005FFLL-MW complies with FDA requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations. The MW grade has a proprietary chemistry that provides excellent thermal stability for blown film applications.

ADINS® Clay Sil-1 is characterized by its free-flowing powder appearance. Achieving the desired improvements hinges on effectively dispersing ADINS synergists into the polymeric matrix.

PMB200OGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

PMB200RGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

OPTIM® E-119 is a maleic anhydride modified linear low density polyethylene. It is used to improve adhesion of HFFR fillers such as Magnesium Hydroxide [Mg(OH)2] & Alumina Trihydrate (ATH) and the polymer matrix.

EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

PMB200PGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

Rainmaker Polymers ACOTASXXNA1 is an Antistatic Compound. Rainmaker Polymers' Antistat Concentrates dissipate surface charges and eliminate the undesirable effects of static build up.

PMB200MGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

OPTIM® E-151 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

PMB200OGGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

LDV-1035T is a Powerful odor and VOC reducer. Utilizing an unique mechanism, our LDV-1035T additive permanently removes VOCs and reduces odor for PP, TPO and other compounds. This highly efficient masterbatch fits easily in extrusion applications and is perfect for recycled and for talc filled polyolefins.

PMB200BGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

BindEX E-160 is a maleic anhydride modified linear low density polyethylene adhesive resin. It can be processed within different extrusion and co-extrusion technologies designed to process polyolefins. It is especially designed to combine aluminum sheets with polymer core in Aluminum composite panels, using extrusion coating process.

MBD 40227 is a masterbatch filled with 2.5% fluorated processing aid on a LLDPE support. For SDS, please contact Addiplast Group using the 'Request Document' button.

MB-80 is an adhesive resin based on modified polyethylene. It can be used to produce a three-layer low temperature adhesive film, for manufacture of Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer with MB-80, which faces aluminum sheet during ACP manufacturing process. It can be processed on normal extruders used for making 3-layer polyethylene films.

BindEX E-165 is a modified linear low density polyethylene adhesive resin designed for use in adhesive film for making Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer which faces aluminum sheet during lamination process. It can be processed on normal extruders used for processing of polyethylenes.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

The MBD 40170 is a masterbatch containing 5 % of an antistatic agent type ethoxylated amine and 10 % of an antiblock agent, on a PE low density base. For SDS, please contact Addiplast Group using the 'Request Document' button.

ST-LST0850 is a light stabilizer masterbatch with high loading of active substance based on hindered amine light stabilizer (HALS) chemistry. ST-LST0850 is available in pellet form, for general purpose use in automotive applications. The additive induces extremely low levels of unwanted VOCs. It is produced by a reactive process which differs from traditional reactive extrusion. The 0850 additive has increased compatibilization properties over our similar ST-LST5350 light stabilizing additive.

OPTIM® E-152 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

BindEX E-183 is a maleic anhydride modified metallocene based linear low density polyethylene (mLLDPE) adhesive resin. It can be processed within different extrusion and co-extrusion technologies designed to process polyolefins. It is blendable with PP random copolymer up to 30% proportion.

PMB200YGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.