Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products in Parts, Shapes & Films: Polyacetal Copolymer (POM)
32 Products found in Parts, Shapes & Films
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
Acetron® C Sterra™ POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Color:
Black
Physical Form:
Rods, Bars
Acetron® C Sterra™ POM-C is a general-purpose copolymer acetal grade that is often favored for its porosity-free nature. Acetron® C Sterra™ POM-C shapes offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Acetron® GP POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Rods, Tube, Plates
Features:
Good Machinability, Low Moisture Absorption, High Strength, Non-porous, Improved Wear, General Purpose, Food Contact Acceptable, Excellent Stiffness
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Acetron® GP Polyoxymethylene POM-C / Ertacetal® C Polyoxymethylene POM-C - the ultimate general-purpose, copolymer acetal grade that offers unparalleled performance and versatility.Features:Porosity free nature ensures a high-quality finish and long-lasting durabilityLow moisture absorption ensures that your components remain stable and dimensionally accurate, even in humid environmentsExcellent machinability allows for easy processing, reducing costs and increasing efficiencyBenefits:The porosity-free nature of Acetron® GP POM-C makes it ideal for Food Contact and medical applications, meeting FDA, NSF, Canada AG, and SSI Standard compliance requirementsThe low moisture absorption capability of this material ensures that your components remain stable and dimensionally accurate, even in humid environments, increasing the lifespan of your productThe excellent machinability of Acetron® GP POM-C makes it easy to process, reducing costs and increasing efficiency in your manufacturing processApplications:Food Contact and Medical ApplicationsBearings and BushingsGears and Electrical ComponentsMedical and Diagnostic EquipmentValves and Fluid Handling Components"
Mitsubishi Chemical Group Corporation
Ertacetal® C LQ POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, High Hardness, Exceptional Resilience, Creep Resistant, Excellent Stiffness, Enhanced Physical Properties, High Thermo-Oxidative Stability, Laser Markable, Hydrolysis Resistant, Wear Resistant, Excellent Mechanical Strength, Excellent Dielectric Properties, Alkali Resistant, Low Water Absorption, Electrically Insulating, Good Machinability, Dimensional Stability
Density:
1430.0 - 1430.0 kg/m³
Tensile Modulus:
3100.0 - 3100.0 MPa
Color:
White
Ertacetal® C LQ - the ultimate solution for laser technology applications. Made from Polyoxymethylene (POM-C), this specialized grade is specifically designed to show markings with common laser technologies such as IR-YAG and UV-YAG. Unlike standard POM-C, which only experiences burning but no visible dark marking, Ertacetal® C LQ POM-C offers a bright-white, less transparent color that makes it perfect for laser marking, engraving, and cutting applications.Features:Bright-white, less transparent color for improved laser marking visibilityIdentical physical properties and machinability as standard Ertacetal® C natural POM-CProcessed by extrusion technology for consistent, high-quality performanceBenefits:Provides clear and precise markings with common laser technologiesCan be used in a wide range of laser technology applications such as engraving, cutting and markingHigh-quality and consistent performanceApplications:Laser technology applications such as engraving, cutting and markingIndustrial manufacturing and production processesMedical and diagnostic equipmentElectrical and electronic components
Mitsubishi Chemical Group Corporation
Ertacetal® C POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, High Hardness, Exceptional Resilience, General Purpose, Food Contact Acceptable, Creep Resistant, Excellent Stiffness, Low Moisture Absorption, Wear Resistant, Excellent Mechanical Strength, Excellent Dielectric Properties, Non-porous, Low Water Absorption, Electrically Insulating, Good Cost-Performance Ratio, Good Machinability, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Ertacetal® C POM-C / Acetron® GP Polyoxymethylene POM-C is a general purpose, copolymer acetal grade that is known for its porosity-free nature and low moisture absorption. These POM-C shapes also offer excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments.Features:Porosity-free materialLow moisture absorptionExcellent machinabilityBenefits:Suitable for use in food contact and medical applicationsMeets FDA, NSF, Canada AG, and SSI Standard compliance requirementsCan be used in a variety of environmentsApplications:Food processing and packaging equipmentMedical and diagnostic equipmentBearings and bushingsGears and electrical componentsValves and fluid handling components
Mitsubishi Chemical Group Corporation
Ertacetal® C ELS POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, High Hardness, Exceptional Resilience, Electrically Conductive, Creep Resistant, Excellent Stiffness, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Excellent Dielectric Properties, Low Water Absorption, Electrically Insulating, Good Machinability, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
1500.0 - 1500.0 MPa
Ertacetal® C ELS Polyoxymethylene POM-C shapes exhibit excellent electrical conductivity qualities, low moisture absorption, high strength and stiffness, and great machinability capabilities. This grade in particular is recommended for use in electrical and explosion sensitive applications, and complies with REACH (EC) no 1907/2006 and UL 94 HB flame rating requirements.Features:Excellent electrical conductivityLow moisture absorptionHigh strength and stiffnessGreat machinabilityBenefits:Ertacetal® C ELS is the perfect solution for applications that require excellent electrical conductivity, low moisture absorption, and high strength and stiffness.Its great machinability makes it easy to work with, ensuring precise and accurate production.Applications:Ertacetal® C ELS is ideal for use in electrical and explosion sensitive applications and complies with REACH (EC) no 1907/2006 and UL 94 HB flame rating requirements.Its excellent electrical conductivity makes it perfect for use in electrical equipment, and its low moisture absorption ensures that it can be used in harsh environments without any issues.Its high strength and stiffness make it suitable for use in applications where precision and accuracy is required.
GEHR
GEHR POM® 10 PE (GLIDE)
Density:
1300.0 - 1360.0 kg/m³
GEHR POM® 10 PE (GLIDE) are used for tribological applications in which increased sliding wear is to be expected, POM-10PE is frequently used, whose sliding properties have been significantly enhanced. This type of POM-C with modified sliding properties also has a raw material food contact approval.
Smiths Metal Centres
Acetal-C + PTFE
Density:
1520.0 - 1520.0 kg/m³
Tensile Modulus:
2500.0 - 2500.0 MPa
Acetal-C + PTFE is a high-quality engineering plastic material.
PAR Group
PAR Group Acetal Sheet - Blue Food Quality
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Sheets
Features:
Crystalline, High Impact Resistance, Wear Resistant, Excellent Mechanical Strength, Low Water Absorption, Smooth Surface Finish, Excellent Hydrolysis Resistance, Electrically Insulating, Good Machinability, Dimensional Stability, Chemical Resistant, Good Sliding Properties, Good Thermal Stability
Density:
1630.0 - 1630.0 kg/m³
Tensile Modulus:
3200.0 - 3200.0 MPa
Color:
Natural, Black, Blue
PAR Group Acetal Sheet - Blue Food Quality offers similar properties to Acetal Sheet. It is blue in color making it popular for use in the food, drink and pharmaceutical sector. Acetal sheet is a food safe product and is available to buy online at PAR Direct by clicking the link above.
Polikim
POM-C(Delrin)®
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Rods
Features:
Excellent Rigidity, Excellent Mechanical Strength, Good Machinability, Wear Resistant, Electrically Insulating, Dimensional Stability, Chemical Resistant, Semi Crystalline, High Strength, Low Moisture Absorption
Density:
1420.0 - 1420.0 kg/m³
Tensile Modulus:
2800.0 - 2800.0 MPa
Color:
White, Natural, Black
POM-C(Delrin)® is a semi crystalline thermoplastic with high mechanical strength and rigidity. The good dimensional stability and particularly good fatigue strength, as well as excellent machining ability, makes POM polymer a highly versatile engineering material, even for complex components.
Smiths Metal Centres
Acetal-C ESD90, dissipative
Density:
1340.0 - 1340.0 kg/m³
Tensile Modulus:
1800.0 - 1800.0 MPa
Acetal-C ESD90, dissipative is a high-quality engineering plastic material. It is used to prevent uncontrolled static discharge in sensitive electronic environments or in explosive atmospheres.
Westlake Plastics
POMALUX® CN-P
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Slab, Rods
Features:
Chemical Resistant, Low Moisture Absorption, Good Machinability, Stiffness, Excellent Dielectric Properties, Good Strength, Wear Resistant
Density:
1450.0 - 1450.0 kg/m³
Color:
Black
Pomalux® CN-P is a conductive acetal co-polymer. It is a carbon powder filled material offering consistent surface resisitivty of 10² – 10⁶ ohms/sq, and also provides enhanced mechanical characteristics including strength and stiffness.
PAR Group
Delrin® Acetal Homopolymer Sheet
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Sheets
Features:
Low Water Absorption, Low Thermal Expansion, Electrically Insulating, High Impact Resistance, Good Machinability, Chemical Resistant, Wear Resistant, Good Sliding Properties, Excellent Mechanical Strength
Density:
1430.0 - 1430.0 kg/m³
Delrin® Acetal Homopolymer Sheet is a strong, rigid plastic with a higher mechanical strength, hardness and creep resistance than Acetal copolymer. It also has a high resistance to wear, but is not resistant to long term immersion in water in temperatures over +60°C.
Manifattura Cattaneo
Manifattura Cattaneo POM c+PTFE
Density:
1490.0 - 1490.0 kg/m³
Tensile Modulus:
2650.0 - 2650.0 MPa
Manifattura Cattaneo POM c+PTFE is a Well-distributed combination of acetal resin + PTFE that highlight both the characteristics of POM C and those of PTFE, increasing the smoothness; therefore it has a low coefficient of friction and better resistance to wear and to temperature.
Smiths Metal Centres
Acetal-C + 25% Glass
Density:
1580.0 - 1580.0 kg/m³
Tensile Modulus:
4500.0 - 4500.0 MPa
Acetal-C + 25% Glass is a high-quality engineering plastic material. It is Acetal-C reinforced with 25% glass fiber.
GEHR
GEHR POM® ELS
Density:
1350.0 - 1400.0 kg/m³
GEHR POM® ELS is a variant of POM-C with enhanced electrical conductivity. The conductivity is generated by a specially adjusted additive. Migration to the part surface, and thus strong fluctuation of the good conductivity, should therefore not occur. The surface resistance, measured on the semi-finished product, is ≤104 Ω.
Westlake Plastics
POMALUX® Polyoxymethylene (POMC)
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Slab, Sheets, Rods, Film
Features:
Chemical Resistant, Wear Resistant, Low Moisture Absorption, Low Friction, Dimensional Stability, Good Machinability, Semi Crystalline, Excellent Dielectric Properties, Stiffness, High Temperature Resistance, Food Contact Acceptable
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
2461.42 - 2461.42 MPa
Color:
Black, Natural
Pomalux® Polyoxymethylene (POMC) is a high-performance acetal copolymer used for a wide range of applications. Pomalux® has good chemical and high-temperature resistance. As a semi-crystalline material, Pomalux® has good wear resistance and low frictional characteristics.Pomalux® also has low moisture absorption making Pomalux® a good candidate for a wide range of structural and mechanical components that carry or transmit loads in dry or wet environments .
ISO TECH Kunststoff GmbH
ISO TECH Kunststoff GmbH ISO-POM
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
2800.0 - 2800.0 MPa
ISO TECH Kunststoff GmbH ISO-POM is a semi-crystalline, thermoplastic plastic that is characterized by high strength and hardness as well as high abrasion resistance. In particular, slide rails and bearing bushings are often made from ISO-POM .
GEHR
GEHR POM® 10 PE-TF (GLIDE)
Density:
1300.0 - 1360.0 kg/m³
GEHR POM® 10 PE-TF (GLIDE) is new material in which the tribological behavior (friction) has been optimized by incorporating solid lubricants. Thanks to these solid lubricants, we achieve a high wear resistance, a low coefficient of friction and thus a good dry running capability. In addition to the standard features, these plastic materials also have excellent emergency running properties, good damping properties as well as optimized chemical resistance and oxidative stability. Their abrasion behavior is also positively influenced by the firmly integrated PTFE additive, which is not harmful to health
GEHR
GEHR POM® C 25GF
Polymer Name:
Polyacetal Copolymer (POM)
Reinforcement Material:
Glass Fibers
Physical Form:
Custom, Rods
Density:
1390.0 - 1390.0 kg/m³
Features:
High Heat Deflection Temperature, Dimensional Stability, Good Sliding Properties, High Strength, Good Thermal Stability, Chemically Coupled, Good Solvent Resistance, Low Water Absorption, Good Environmental Stress Crack Resistance (ESCR), Electrically Insulating, High Rigidity, High Stiffness
GEHR POM® C 25GF has a broad property profile that offers increased strength for many applications compared to non-reinforced GEHR POM-C®. In addition, the reinforcement reduces the coefficient of expansion and simultaneously increases the heat deflection temperature.
Viva Nylons Limited
Viva Nylons Limited POM-C (Acetal)
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
2700.0 - 2700.0 MPa
Viva Nylons Limited POM-C (Acetal) otherwise known as Acetal Copolymer features highly crystalline resins, making this material strong and rigid, with a low coefficient of friction in comparison to metals and other plastics. POM-C is also creep resistant and is recommended for applications where dimensional stability is important. The Copolymer grade is the ideal combination of strength, stiffness and wears resistance. It absorbs very little moisture, is easily machinable and is genuinely porosity-free making it the preferred grade for food contact and medical applications. The product exhibits an elevated resistance to hydrolysis, strong alkalis and thermal-oxidative degradation when compared to acetal homopolymer.
PAR Group
PAR Group Acetal Sheet - Metal & X-Ray Detectable
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Sheets
Features:
Good Impact Strength, Good Stiffness, High Impact Resistance, Good Machinability, Dimensional Stability
Density:
1630.0 - 1630.0 kg/m³
Tensile Modulus:
3200.0 - 3200.0 MPa
PAR Group Acetal Sheet - Metal & X-Ray Detectable has good impact resistance and provides good dimensional strength. It combines good stiffness, dimensional stability and impact strength while remaining easy to machine. It contains very fine material additives making it detectable to most metal detector equipment.
Apple Rubber Products
ExpresSeal® POM (White or Black) (Polyoxymethelene/Polyacetal) (Hard Plastics)
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Seals
Features:
Low Water Absorption, Good Mechanical Properties
Color:
Black, White
ExpresSeal® POM (White or Black) (Polyoxymethelene/Polyacetal) (Hard Plastics)Used for sealing components such as back-up rings and special shapes. » Low absorption of water (low swelling) and strong mechanical properties make this material ideal for bearings and guide-rings.
GEHR
GEHR POM® C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Custom, Rods, Sheets, Bars
Features:
High Stiffness, Excellent Toughness, Low Water Absorption, High Hydrolytic Stability, Good Solvent Resistance, High Rigidity, Good Sliding Properties, Electrically Insulating, Good Thermal Stability, Dimensional Stability, Chemical Resistant, Good Environmental Stress Crack Resistance (ESCR), High Strength
Density:
1390.0 - 1390.0 kg/m³
Color:
Natural, Black
GEHR POM® C is produced from the continuous operating temperature of this engineering plastic ranges between -40 °C and +100 °C. Based on its toughness combined with high dimensional stability, there is no tendency to stress cracking. The copolymer has high thermal stability and chemical resistance. In particular, the increased hydrolytic stability and resistance to contact with many solvents must be taken into account. This material is frequently found in applications in the food industry, as cleaning processes require resistance to the use of hot water or various chemical agents. Our round rods and sheets in natural or black color comply with the food contact regulations according to 10/2011/EC.
GEHR
GEHR POM® ESD 9
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Custom, Sheets
Features:
High Stiffness, Low Water Absorption, Good Solvent Resistance, High Rigidity, Good Sliding Properties, Electrically Insulating, Good Thermal Stability, Dimensional Stability, Good Environmental Stress Crack Resistance (ESCR), Reduced Surface Resistivity, High Strength
Density:
1300.0 - 1300.0 kg/m³
GEHR POM® ESD 9 is a variant of POM-C with reduced surface resistance. Unfilled thermoplastic materials made of plastic are electrically insulating and are classified as non-conductors. By means of certain modifiers, such as treated carbon black, metal fibers or certain salts, however, an inherently acting electrical conductivity can also be introduced. This can result in antistatic, static dissipative or even very conductive properties. The aggregates used are not subject to migration, so that continuity of this special property is ensured. In our standard program we have the following electrically conductive materials in stock: GEHR PE-ELS®, GEHR POM-ELS® and GEHR PVDF-ELS®. Due to market-specific requirements, we have now added an electrically conductive type to the technical materials: GEHR POM-ESD 9® has a static conductivity with a surface resistance of between 106 Ω and 109 Ω. This favors applications in sensitive electrical engineering and conveyor technology with – at the same time – increased requirements in explosion protection.
Traid Villarroya Hnos
TKG® AL (POM C)
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Bars, Tube, Plates
Features:
Excellent Toughness, Good Machinability, Wear Resistant, High Strength, Good Sliding Properties
Density:
1410.0 - 1410.0 kg/m³
Color:
Natural, Opaque
TKG® AL (POM C) commonly known as Acetal, is a crystalline polymer obtained by polymerizing formaldehyde. Discovered only a few years ago, it has enjoyed a rapid growth in popularity because of its excellent mechanical characteristics, its stability in spite of humidity and for being easy to machine.
Westlake Plastics
POMALUX® SD-A
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Slab, Film, Rods, Sheets
Features:
Low Outgassing, Good Machinability, Excellent Dielectric Properties, Wear Resistant, Chemical Resistant, Low Moisture Absorption, Excellent Lubricity, Non Sloughing
Density:
1330.0 - 1330.0 kg/m³
Color:
Natural, Beige
Pomalux® SD-A is non-carbon-filled, non-migratory, permanently antistatic acetal co-polymer offering surface resistivity of 109 – 1011 ohms/sq which is non-humidity dependent. Natural in color, this material offers enhanced lubricity, provides superior wear resistance, and ease of machining. Exhibiting low outgassing and non-sloughing characteristics, it is optimal for ESD applications where carbon sloughing cannot be accepted.
PAR Group
PAR Group Acetal Sheet
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Sheets
Features:
Crystalline, High Impact Resistance, Wear Resistant, Excellent Mechanical Strength, Low Water Absorption, Smooth Surface Finish, Excellent Hydrolysis Resistance, Electrically Insulating, Good Machinability, Dimensional Stability, Chemical Resistant, Good Sliding Properties, Good Thermal Stability
Density:
1390.0 - 1390.0 kg/m³
Tensile Modulus:
2618.2 - 2618.2 MPa
Color:
Natural, Black
PAR Group Acetal Sheet (polyoxymethylene copolymer), commonly referred to as POM-C, is a strong, rigid semi-crystalline thermoplastic that provides good sliding properties, high mechanical strength and excellent resistance to impact and wear.
Smiths Metal Centres
Acetal-C ESD60, conductive
Density:
1400.0 - 1400.0 kg/m³
Tensile Modulus:
1900.0 - 1900.0 MPa
Acetal-C ESD60, conductive is a high-quality engineering plastic material. It is used to prevent uncontrolled static discharge in sensitive electronic environments or in explosive atmospheres.
Licharz
Licharz POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Plates, Tube, Bars
Features:
Superior Surface Quality, Good Machinability, Good Impact Strength, High Rigidity, Good Sliding Properties, Wear Resistant, Dimensional Stability, High Hardness, Creep Resistant, High Strength, Low Moisture Absorption, High Degree of Crystallinity, Fatigue Resistant
Density:
1410.0 - 1410.0 kg/m³
Color:
Natural, Black
Semi-crystalline thermoplastic with high Hardness, rigidity and mechanical strength as well good creep resistance. By adding a it has a special, homogeneously distributed solid lubricant, compared to pure PET, improved sliding properties and higher abrasion resistance.
Manifattura Cattaneo
Manifattura Cattaneo POM c
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
2800.0 - 2800.0 MPa
The semi-finished products in Manifattura Cattaneo POM c are more resistant to hydrolysis, strong alkalis and thermo-oxidant degradation.
COMCO EPP
Comco POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Sheets, Rods
Features:
Low Moisture Absorption, Dimensional Stability, Good Machinability, Friction Resistant, Food Contact Acceptable, Excellent Solvent Resistance, Chemical Resistant
Color:
Black, Blue, Red, Green, Yellow, Natural
Comco POM-C is an acetal in its pure form with no additives. POM-C fulfills all food-contact safety requirements according to FDA and EN regulations.
Smiths Metal Centres
Smiths Metal Centres POM-C Natural or Black unmodified
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
2800.0 - 2800.0 MPa
Smiths Metal Centers POM-C Natural or Black Unmodified is a high-quality general purpose engineering plastic material. Its chemical name is polyoxymethylene and it is available in a range of grades and forms to suit many applications.