Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Characteristics
- High mechanical strength, rigidity and hardness
- Excellent ductility and tenacity (elastic memory)
- Good creep resistance
- High impact resistance, even at low temperatures
- Very good dimensional stability
- Good sliding properties and wear resistance
- Excellent machinability on machine tools
- Good dielectric and electrical insulation properties
- Physiologically inert (suitable for contact with food)
- It is not self-extinguishing
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Application
POM C is suitable for mechanical machining on automatic lathes and is particularly recommended for the construction of precision parts
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Flammability
- Tribological Properties
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.41 | g/cm3 | ISO 1183 |
Water (Absorption At Saturation) | 0.85 | % | ISO 62 |
Moisture (Absorption At 23°C - 50% RH) | 0.2 | % | ISO 62 |
Value | Units | Test Method / Conditions | |
Yield Strength | 63 | MPa | ISO 527 |
Rockwell Hardness | 84 | Scale M | ISO 2039-2 |
Elongation (Yield) | 10 | % | ISO 527 |
Elongation (Break) | 33 | % | ISO 527 |
Tensile Modulus | 2800 | MPa | ISO 527 |
IMPact Strength (Un-Notched) | 280 | KJ /m2 | ISO 179 |
IMPact Strength (Notch) | 8 | KJ /m2 | ISO 179 |
Flexural Strength (3.5%) | 89 | MPa | ISO 178 |
Flexural Modulus | 2500 | MPa | ISO 178 |
Compressive Stress (1% Strain-23°C) | 19 | MPa | ISO 604 |
Poisson'S Ratio | 0.43 | — | Abs |
Value | Units | Test Method / Conditions | |
Maximum Operating Temperature | 115 | °C | — |
Heat Deflection Temperature (0.45 MPa) | 156 | °C | ISO 75 |
Heat Deflection Temperature (1.81 MPa) | 105 | °C | ISO 75 |
Thermal Conductivity (23°C) | 0.31 | W/(K*m) | DIN 52612 |
Coef. Of Linear Thermal Expansion (23 To 100°C) | 110 - 110 | μm | ASTM D696 |
Value | Units | Test Method / Conditions | |
Bondability | Bonding and painting are possible after special surface treatment. | — | — |
Oxygen Limit Index | 15 | % | ISO 4589 |
UV Resistance | Resistance to UV exposure is reached with the pigmentation or specific additive. | — | — |
Value | Units | Test Method / Conditions | |
Volume Resistance | min.10^12 | Ω | IEC 60093 |
Surface Resistance | 10^16 | Ω | IEC 60094 |
Dielectric Constant (1 MHZ) | 3.9 | abs | IEC 60250 |
Dielectric Loss Factor (1 MHZ) | 0.007 | tan | IEC 60250 |
Dielectric Witch (2mm) | 22 | KV/mm | IEC 60243 |
Value | Units | Test Method / Conditions | |
Flammability | HB-V2 | — | UL 94 |
Value | Units | Test Method / Conditions | |
Static Coef. Of Friction On Polished Steel | 0.14 | abs | MPC test |
Dynamic Coef. Of Friction On Polished Steel | 0.21 | abs | MPC test |
Pv Limit Without Lubrication | 0.15 | MPa | MPC test V = 0.5 m / s MPC |
Wear Coefficient On Hardened Polished Steel | 1.5 - 2.8 | μm/s | test PV = 0.1 MPa * m / s |
Maximum Pressure | 18 | MPa | MPC test |
Regulatory & Compliance
- Food Contact Safety (FDA Compliance)
Yes (Test Method -DM 21.3.73)