Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Saint-Gobain
Dynafoam™ 30% Reduction
Polymer Name:
Thermoset (unspecified)
Processing Methods:
Foam Processing
Dynafoam 30% Reduction is a Thermoset, Unspecified (TS, Unspecified) product. It can be processed by foam processing and is available in North America. Applications of Dynafoam 30% Reduction include foam and sealing applications.Characteristics include: Heat Resistant Chemical Resistant
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 956GM 956 70
Polymer Name:
Polyurethane (unspecified)
End Uses:
Tubing, Tires
Density:
1020.0 - 1060.0 kg/m³
Tensile Strength:
4.6 - 5.6 MPa
This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.
BCC Products
BCC Resins™ BC 8165
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Modeling Material
BC 8165 is a low viscosity, rapid setting, rigid urethane compound. Similar to BC 8163, however exhibits an 8 to 10 minute working time. This system will cure quickly to a hard, tough, impact resistant casting. BC 8165 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. BC 8165 is recommended for thin wall model and prototype applications where a "thermoplastic feel" is desired.
BIP (Oldbury) Ltd.
Surkofilm® 1137
Polymer Name:
Polyurethane (MDI-based)
Processing Methods:
Lamination
Surkofilm® 1137 contains both polyether and polyester, aliphatic and some aromatic based high molecular weight structures, and comprise a range of solvent based film forming urethanes, which can be used on a wide variety of substrates where a demanding performance calls for high quality inks.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh LH 28 1TM
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Laminating
End Uses:
Molds/Dies/Tools, Mold Making, Tooling, Power/Other Tools
Flexural Strength:
85.0 - 105.0 MPa
Ebalta LH 28-1 / TM is a two components epoxy laminating resin, precuring at room temperature and, depending on postcuring, can be used till 175°C. Since this laminating resin system contains no fillers, it has got good wetting properties and makes a high glass fabric content possible. This leads to a low coefficient of thermal expansion and high strength. Together with aluminum granules, ebalta LH 28-1 is suitable for back filling of heat resistant molds and molding tools. At room temperature the curing takes 7 days and the material can only be used for applications till 60°C.
BIP (Oldbury) Ltd.
Beetafin™ BF2797
Polymer Name:
Polyurethane (MDI-based)
Features:
Consistent High Quality
Beetafin™ BF2797 is a water based Polyurethane emulsion having excellent compatibility with most common water-based systems. The product is suitable for application to a variety of substrates where high quality and longevity are prime requirements.
KarpatSmoly
KarpatSmoly UF Resin Grade B
Polymer Name:
Urea Formaldehyde Resin (UF)
KarpatSmoly UF Resin Grade B is an aqueous suspension, non-flammable, non-explosive. UF resin of lowered toxicity withfree formaldehyde content not above 0.1%.
Hapco Inc.
Di-Pak™ R-4307
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4307A high performance, long working life potting compound for potting/encapsulating units requiring high physical strength and excellent electricals. DI-PAK R-4307 is a holds its mechanical and electrical properties while under the most severe conditions. This is due to its low water absorption, thermal shock resistance, and retention of strength at elevated temperatures.
Fudow Company
Fudow Company F5750F
Polymer Name:
Phenol Formaldehyde (PF)
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components, Switches, Electrical/Electronic Applications, Automotive Interior Parts, Bobbins, Relay Bases, Automotive Electronics, Automotive Applications
Fudow Company F5750F is a glass fiber.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6610
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Density:
1110.0 - 1110.0 kg/m³
KPR 6610 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6610 is used in structural applications.
Poliya Composites and Polymers
Polipol 339-TA-LSE-H40
Polymer Name:
Thermoset Polyester
Processing Methods:
Spray Lay-Up, Hand Lay-Up
End Uses:
Automotive Interior Parts, Medical Devices, Electrical Components, Marine Applications, Industrial Parts, Automotive Applications, Enclosure, Automotive Exterior Parts
Cure Method:
Chemical Cure
Polipol 339-TA-LSE-H40 is a Hand lay-up / Spray-up medium reactivity thixotropic preaccelarated LSE polyster.
BCC Products
BCC Resins™ MB1300
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Foam Processing, Machining
End Uses:
Molds/Dies/Tools, Modeling Material, Prototyping, Agricultural Applications, Automotive Applications, Aerospace Applications
MB 1300 is a Mahogany colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1300 is medium low density foam of approximately 30lbs/ft³ board. Easily cut using CNC machining equipment the MB 1300 is perfectly suited for visual master models, architectural design models as well as design verification and prototype tools.
RECKLI
RECKLI Epoxy Compound 51/30
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Industrial Castings
RECKLI Epoxy Compound 51/30 is a ready-to-use, easily flexible, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts or usable as a casting mass in construction. Its color is creamy-white.
Automotive Compounding Industry (Perplastic Group)
Automotive Compounding Industry (Perplastic Group) XLPE T3 - 2
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables
BCC Products
BCC Resins™ BC 5010
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Lamination
End Uses:
Laminates
BC 5010 is a high quality, low viscosity room temperature curing laminating resin. A Safety System for the production of a variety if dimensionally stable fiberglass tools. BC 5010 features low odor and rapid "wet-out" with no vertical drain off. An excellent general purpose laminating resin to meet the tooling requirements for automotive, aircraft, and foundry.
Duresco
Duresco NU 463 V
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Injection Molding, Transfer Molding
End Uses:
Encapsulant, Bushings
Volume Resistivity:
10000000000000.0 - 10000000000000.0 Ohm-m
Flexural Strength:
180.0 - 180.0 MPa
Duresco NU 463 V is a Glass fiber reinforced encapsulation epoxy molding compound with very good mechanical properties and excellent crack resistance.
Crosslink Technology Inc.
Crosslink Technologies CLR1329
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Encapsulant, Electrical/Electronic Applications, Electrical Components
CLR1329 is a two component heat cured epoxy casting system. The cured product is suitable for outdoor applications. The product passes accelerated in-house ultraviolet testing without chalking. The product passes in-house ul 94-hb flammability testing.
Bonyan Kala Chemie
BUP 640
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Cure Method:
Heat Cure
Density:
1170.0 - 1170.0 kg/m³
BUP 640 is an un-promoted orthophthalic based unsaturated polyester resin with very low color, high solid and viscosity, good flexibility, transparency and mechanical properties for ambient temperature cure with MEK peroxide.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6300C
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Density:
1130.0 - 1130.0 kg/m³
KPR 6300C by Kemrock Industries and Exports is an orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6300C is used in buttons.
Automotive Compounding Industry (Perplastic Group)
Automotive Compounding Industry (Perplastic Group) POLY EV T3
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables
Resin-SA Pty Ltd
Resin-SA Pty Ltd RES CR002-U-N-A
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Processing Methods:
Casting
Resin-SA Pty Ltd RES CR002-U-N-A appears clear and it is fast curing casting resin.
Hapco Inc.
Ultralloy™ 207
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Vacuum Casting
End Uses:
Prototyping, Agricultural Applications, Housings, Toys
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 200 SERIESA series of general purpose Liquid Molding Compounds that do not change color and remain clear/ light yellow when cured. Ultralloy 200 Series are ideal for in mold coloring of parts. They can be easily pigmented and the color remains the same in the cured or liquid state. Tensile strengths from 10,300 psi to 11,800 psi are available.
Silon
TABOCAB® SXI 009
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
Density:
914.0 - 914.0 kg/m³
Tensile Strength:
21.5 - 21.5 MPa
The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.
Nippon Pelnox
Nippon Pelnox MU-231A
Polymer Name:
Polyurethane (unspecified)
End Uses:
Speed Sensor, Relay Bases, Automotive Electronics
MU-231A its Functions Low Stress, High Thermal Conductivity, Stress Release, Shock Absorption.
Crosslink Technology Inc.
Crosslink Technologies CLR1876
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting, Potting
End Uses:
Encapsulant, Electrical/Electronic Applications, Electrical Components
Volume Resistivity:
200000000000000.0 - 200000000000000.0 Ohm-m
CLR1876 is a thermally conductive, two part epoxy system. the system was secifically designed for applications where heat dissipation on thermally sensitive devices is required.
Fudow Company
Fudow Company F5800F
Polymer Name:
Phenol Formaldehyde (PF)
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components, Switches, Electrical/Electronic Applications, Automotive Interior Parts, Bobbins, Relay Bases, Automotive Electronics, Automotive Applications
Fudow Company F5800F is a Organic filler.
Telene
Telene® 1660
Polymer Name:
Polydicyclopentadiene (PDCPD)
Processing Methods:
Injection Molding, Reaction Injection Molding (RIM)
End Uses:
Fenders, Automotive Under The Hood, Engine Covers, Automotive Bumpers, Automotive Exterior Parts
Telene® 1660 technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency.
Resin-SA Pty Ltd
Resin-SA Pty Ltd SHCP 3254 BQTN-WS
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE), Isophthalics
Processing Methods:
Hand Lay-Up, Hand Lay-up, Spray Lay-up, Spray Lay-Up
Resin-SA Pty Ltd SHCP 3254 BQTN-WS is a isopthalic resin which is used for spray up /hand laminating.
Rampf Group
RAKU® TOOL EL-2203
Polymer Name:
Epoxy Resins & Compounds
Chemical Family:
Epoxy & Epoxy Derivatives
Processing Methods:
Compression Molding, Vacuum Infusion Processing (VIP), Hand Lay-Up, Laminating, Vacuum Casting, Resin Transfer Molding (RTM)
End Uses:
Prototyping, Mold Making
RAKU® TOOL EL-2203 has a viscosity range of 400 – 700 mPas, is low in viscosity, has excellent wetting properties, and gels well at room temperature.
Silon
TABOCAB® SXG 011
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
Density:
1400.0 - 1400.0 kg/m³
Tensile Strength:
18.0 - 18.0 MPa
The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.
Matrix Polymers
Revolve XL400 Conductive
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Rotational Molding
End Uses:
Fuel Tanks
Density:
955.0 - 955.0 kg/m³
Revolve XL400 Conductive is a rotational molding crosslinkable polyethylene grade which combines conductivity with all the benefits of a crosslinkable resin such as wide processing window, excellent impact strength, outstanding chemical resistance and long term properties.
RECKLI
RECKLI Epoxy GF Filler
Polymer Name:
Epoxy Resins & Compounds
RECKLI Epoxy GF Filler is a pasty, glass fiber reinforced, solvent-free twocomponent epoxy resin with high impact resistance as well as compressive- and flexural strength. It is almost shrinkage-free and insensitive to moisture, thus being applicable on slightly humid surfaces. The addition of further filling material is not recommended.
Austin Novel Materials
TEXALAN® W295A
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Cables, Pipes, Film, Flexible Packaging, Belts & Belt Repair
Density:
1190.0 - 1230.0 kg/m³
Tensile Strength:
32.0 - 32.0 MPa
Texalan® W295A product has high hydrolysis resistance, solvent resistance, good hand feeling, and high recycling rate. Also has high strength, excellent processing performance.
Hapco Inc.
Ultraclear™ 480N-10
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Prototyping
Ultraclear™ 480N-10 by Hapco Inc. is comprised of Polyurethane (unspecified). It is commonly used as Casting Resin for a variety of applications.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6620
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Pultrusion
Density:
1120.0 - 1120.0 kg/m³
KPR 6620 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6620 is suitable for processing by pultrusion. Recommended for FRP composites.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh MG 804, 804 GF/ MG 804 1
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Modeling Material
Density:
1080.0 - 1120.0 kg/m³
This product is a polyurethane system. Preferential processing in usually used vacuum pouring plants. Maximum wall thicknesses of the parts: from 5 – 10 mm.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10