Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Eagle Chemicals
USP-EAGLE (GP25-65)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
Processing Methods:
Lamination
USP-EAGLE (GP25-65) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color and low viscosityit is used in general-purpose & glass fiber lamination.
Resin Systems
Resin Systems RS-2244 No Track Epoxy Resin
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
62.01 - 62.01 MPa
RS-2243 is a castable, filled epoxy resin specifically designed for high temperature, high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines. This material has superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.
Leepoxy Plastics
Leecast 20-73
Polymer Name:
Polyurethane (unspecified)
LEECAST 20-73 is a two-part, reversion resistant, electrical grade room temperature curing potting compound. It is a unique urethane system that contains neither MOCA nor TDI. LEECAST 20-73 is designed to provide excellent dielectric properties over a wide temperature range. It has good low temperature flexibility and is ideally suited for protecting pressure sensitive glass diodes and other electronic devices. Its low viscosity and long pot life make it attractive for penetrating complex modules and for the aggregate casting method of encapsulation and potting. LEECAST 20-73 also features excellent reversion resistance or hydrolytic stability.
SACO AEI Polymers
PEXIDAN® HF SX407K
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Industrial Cable Insulation, Cables, Wires, Nuclear Power Applications
Density:
1370.0 - 1370.0 kg/m³
PEXIDAN® HF SX407K pre-grafted base is mixed with a crosslinking catalyst masterbatch CM424 in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX407K has been designed to be used in different nuclear power plant radiation resistance cables sheathing with LOCA approval. Different types of cable designs made using SX407 have complied with the following flame tests: - BS 4066 Part 1/IEC 332 Part 1; CEGB GDCD Standard 21; VDE 0472 Pt.804 Method C; VDE 0472 Pt.814; NF C 32- 070 Test 2 (Category C1); BS 4066 Part 3; IEC 332 Part 3 (Categories A, B & C).
Resin Systems
Resin Systems RS-2200
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
62.01 - 62.01 MPa
RS-2200 is a castable, filled epoxy resin with good overall general properties. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and milk alkalines.
SACO AEI Polymers
PEXIDAN® HF SX612ES
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1520.0 - 1520.0 kg/m³
Tensile Strength:
13.0 - 13.0 MPa
PEXIDAN® HF SX612ES pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612ES has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41, with enhanced fire resistance to comply with fire testing on smaller cross sections.
SACO AEI Polymers
PEXIDAN® HF SX738
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Building Wire Insulation, Cables, Appliance Wire Insulation, Wires
Density:
1400.0 - 1400.0 kg/m³
PEXIDAN® HF SX738 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. This system is designed specifically for the production, by extrusion, of flame retardant halogen free heat shrinkable tubing. The two component system SX738:CM401 combines ease of processing with the ability to achieve a degree of crosslinking compatible with good expansion and contraction.
Resin Systems
Resin Systems RS-2242
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
62.01 - 62.01 MPa
RS-2242 is a castable, filled epoxy resin specifically designed for high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines. This material has superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL 94/V-0 requirements.
Resin Systems
Resin Systems RS-2920 Toughened Epoxy
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
97.838 - 97.838 MPa
RS-2920 is a castable toughened epoxy resin that has the look and feel of a thermoplastic and/or urethane but offers higher temperature resistance than cast urethanes. It’s high impact strength makes this material an excellent choice when urethanes are not sufficient to do the job.
Eagle Chemicals
USP-EAGLE (BU130-70)
Polymer Name:
Thermoset Polyester
Chemical Family:
Unsaturated Polyester (UPE), Polyesters
Cure Method:
Chemical Cure
Processing Methods:
Casting, Centrifugal Casting
USP-EAGLE (BU130-70) is Unsaturated Polyester resin with good flexibility, high translucency, non-accelerated and non thixotropic. It is used in manufacture of buttons by centrifugation and casting rods procedures.
Resin Systems
Resin Systems RS-3675
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1108.0332 - 1108.0332 kg/m³
Rs-3675 is a castable rigid urethane material that has the look and feel of a thermoplastic material but is easily cast into intricate thin and thickwall parts. It has good mechanical properties, has high strain capability and is easily pigmented into all opaque colors.
Resin Systems
Resin Systems RS-2922
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
121.953 - 121.953 MPa
RS-2922 is a 10% class filled version of RS-2920, castable toughened epoxy resin. This material has the look and feel of a thermoplastic and/or urethane but offers higher temperature resistance than cast urethanes. It’s high impact strength makes this material an excellent choice when urethanes are no sufficient to do the job.
Resin Systems
Resin Systems RS-2240
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS2240 is a castable, filled epoxy resin specifically designed for high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids, and mild alkalines. This material also offers superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.
Resin Systems
Resin Systems RS-3690
Polymer Name:
Polyurethane (unspecified)
Density:
1250.0 - 1250.0 kg/m³
Tensile Strength:
75.101 - 75.101 MPa
Eagle Chemicals
USP-EAGLE (GP20-62)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
Processing Methods:
Lamination
USP-EAGLE (GP20-62) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color, rigid film, and low viscosityit is used in glass fiber lamination for general purpose applications.
Resin Systems
Resin Systems RS-2279 Outdoor Epoxy Resin
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
105.417 - 105.417 MPa
RS-2279 is a castable, filled epoxy resin specifically designed to operate under high voltage conditions in outdoor applications, as well as SF6 environments. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines.
Leepoxy Plastics
Leecast 15-95-3
Polymer Name:
Epoxy Resins & Compounds
Volume Resistivity:
2000000000000.0 - 2000000000000.0 Ohm-m
LEECAST 15-95-3 is a two-part epoxy casting compound designed for encapsulation of high voltage components. Used in UL-listed applications requiring excellent electrical performance, heat dissipation,and flame retardance, it provides a system that is non-burning and highly resistant to thermal cycling with minimal effect on components.
SACO AEI Polymers
PEXIDAN® HF SX623
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1430.0 - 1430.0 kg/m³
Tensile Strength:
10.3 - 10.3 MPa
PEXIDAN® HF SX623 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX623 has been designed to meet the requirements of IEC 60092-360 SHF2, BS 7655-2.6 SW4 and EN 50264 sheathing applications.
Resin Systems
Resin Systems RS-2272
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2272 is a patented, castable, lead free insulating grade filled epoxy resin specifically designed for high voltage insulator applications requiring X-Ray shielding. This material provides good electrical grade insulation properties, high mechanical properties, and superior arc resistance to any lead oxide filled epoxy. This material is non-flammable and meets UL94V-0.
Resin Systems
Resin Systems RS-2297
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2297 is a patented, very high density, filled, castable, lead free insulating grade epoxy resin specifically designed for high voltage insulator applications requiring x-ray shielding. This material provides greater than 28% of the x-ray shielding of lead metal, and has superior x-ray shielding to the industry standard 30% lead oxide filled “orange†epoxy. This high density material is non-hazardous and meets UL94V-0 requirements.
Eagle Chemicals
USP-EAGLE (RS18-65)
Polymer Name:
Thermoset Polyester
Chemical Family:
Unsaturated Polyester (UPE), Polyesters
Cure Method:
Chemical Cure
Processing Methods:
Continuous Lamination, Lamination
USP-EAGLE (RS18-65) is Unsaturated Polyester resin with high clarity, very good transparency as the refractive index of cured resin matches that of E-glass fiberit is used in the manufacturing of roofing sheets by continuous lamination.
Eagle Chemicals
USP-EAGLE (GP60-65)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
Processing Methods:
Hand Lay-Up, Hand Lay-up, Spray Lay-up, Spray Lay-Up
USP-EAGLE (GP60-65) is Unsaturated Polyester resin pre-accelerated, thixotropic and excellent adhesion to acrylic sheetit is used in a spray, hand lay-up and glass fiber reinforced back lamination for sanitary ware.
Resin Systems
Resin Systems RS-3111
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1100.0 - 1100.0 kg/m³
Tensile Strength:
44.785 - 44.785 MPa
RS-3111 is an unfilled polyurethane that produces tough, dimensionally stable castings and is used to produce parts requiring a “thermoplastic” feel and appearance.
Resin Systems
Resin Systems RS-2287
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
62.01 - 62.01 MPa
RS-2287 is a high density, castable, lead free non-insulating grade filled epoxy resin designed for applications requiring x-ray shielding. This material provides 50% of the x-ray shielding of lead metal at a given thickness, has high mechanical properties, can be cast into complex shapes, and is easily machined with lead free processing techniques. this material is non-flammable and meets UL94V-0.
Leepoxy Plastics
Leecast 30-125
Polymer Name:
Polyurethane (unspecified)
LEECAST 30-125 is a two-component urethane that is mixed and poured at room temperature. LEECAST 30-125 develops full hardness after 24 hours at room temperature to provide an impact, UV and temperature resistant system.
Eagle Chemicals
Eagle Chemicals Polyol SHS 100 C
Polymer Name:
Polyurethane (MDI-based)
Chemical Family:
Polyurethanes (PU)
Polyol SHS 100 C / Cross.101 / ISO.SHS 100 A is Three component PU system suitable for the production of Soft Casual soles.
Resin Systems
Resin Systems RS-3590
Polymer Name:
Polyurethane (unspecified)
Density:
1130.0 - 1130.0 kg/m³
SACO AEI Polymers
PEXIDAN® HF SX622
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1430.0 - 1430.0 kg/m³
Tensile Strength:
10.5 - 10.5 MPa
PEXIDAN® HF SX622 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX622 has been designed to meet the requirements of IEC 60092-360 SHF2 sheathing.
ADEKA Corporation
ADEKA™ EP-4005
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Engineered Applications, Electrical/Electronic Applications
ADEKA™ EP-4005, a stellar member of the epoxy resins and compounds family, is tailored to meet the demands of diverse applications. Boasting features like good adhesion, good flexibility, and low viscosity, this polymer ensures superior performance in both electrical/electronic and engineered applications. Specifically designed for use in casting processes within plastics and elastomers, ADEKA™ EP-4005 stands as a reliable choice for those seeking versatility and excellence in their material formulations.
ADEKA Corporation
ADEKA™ EP-5100R
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
ADEKA™ EP-5100R, an epoxy resin and compound polymer, is at the forefront of plastics technology. Specifically designed for casting methods, it ensures optimal performance in various industrial applications. ADEKA™ EP-5100R stands as a testament to reliability in precision casting processes.
ADEKA Corporation
ADEKA™ EP-4100E
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Laminates, Electrical/Electronic Applications
ADEKA™ EP-4100E, an epoxy resins and compounds variant, is tailored for plastics and elastomers processing through casting techniques. ADEKA™ EP-4100E is primarily intended for end uses in electrical and electronic applications and laminates. This specialized polymer ensures optimal performance in these specific industrial applications.
ADEKA Corporation
ADEKA™ EP-4000S
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
ADEKA™ EP-4000S, identified by the polymer name epoxy resins and compounds, is characterized by its low viscosity. Designed for plastics and elastomers processing methods, particularly casting, ADEKA™ EP-4000S ensures ease of application and efficient material flow in various industrial processes.
SACO AEI Polymers
PEXIDAN® HF SX545
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1490.0 - 1490.0 kg/m³
Tensile Strength:
12.0 - 12.0 MPa
PEXIDAN® HF SX545 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX545 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.
ADEKA Corporation
ADEKA™ EP-4080E
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Electrical/Electronic Applications
ADEKA™ EP-4080E, a distinguished epoxy resins and compounds variant, is tailored for specific plastics and elastomer processing methods, especially casting. With a prime focus on applications in the electrical and electronic domains, ADEKA™ EP-4080E ensures optimal material performance in these specialized settings. As a reliable choice for casting processes, this polymer addresses the unique requirements of electrical and electronic applications, making it an ideal solution for industries demanding precision and reliability.
ADEKA Corporation
ADEKA™ ED-523T
Polymer Name:
Epoxy Resins & Compounds
ADEKA™ ED-523T, distinguished by the polymer name epoxy resins and compounds, is a specialized resin designed for plastics and elastomer functions. With a foundation in advanced plastic technologies, it stands as a vital component in formulations within the plastics industry, embodying a commitment to excellence in resin applications.
SACO AEI Polymers
PEXIDAN® HF SX650
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1470.0 - 1470.0 kg/m³
Tensile Strength:
12.0 - 12.0 MPa
PEXIDAN® HF SX650 pre-grafted base is mixed with catalyst masterbatch CM603 or CM601, in an addition rate between 3% and 5%, depending on extrusion conditions. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX650 system has been developed to meet specification requirements TUV 2Pfg1169:2007, EN 50618:2014 and IEC 62930.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10