Brands in Adhesives & Sealants

THERMOSEAL® thermal insulation products are carefully formulated to withstand thermal expansion and contraction and have excellent thermal insulation properties, very low shrinkage, and high strength. Our refractory cements are available in thick paste or thick cement consistencies. Our refractory coatings come as paste or paint, and our refractory moldables are available as putty, mixes, or pastes.

Filter-bond™ is a series of thermoset potting compounds used for potting and pre-potting applications by some of the industry's largest filter manufacturers.

https://neyra.com/products/crack-fillers-primers-paint/

Pyrosil™ is a non-adhesive, iron oxide red silicone rubber tape, designed to withstand continuous exposure to temperatures up to 475°F (246°C).

Greenmaker Industries Wall Bond is a line of professional adhesives with high bond strengths. Designed for use in residential and commercial interior applications with the end user in mind. All our products have low odor, come ready mixed, easy to use and are tiger tough.

ARcare® double-coated spacer tapes are used to create capillary channels in diagnostic and biosensor devices for maintaining accurate sample volume and flow. Our state-of-the-art manufacturing process coupled with in-line measurement gages ensures a tightly controlled overall tape thickness.

The TUBIBOND product range offers extensive solutions for the Paper converting industry. TUBIBOND products are highly efficient and utmost sustainable. They are designed to ensure fast and smooth production processes.

ROOFDX SUPER is a single component urethane especially designed as a waterproofing membrane for all kinds of roofing. It cures to form a tough, elastic, waterproof seal and may be incorporated into roofing specifications that provide roof protection of 10 and 20 years. ROOFDX SUPER contains corrosion-inhibiting pigments and will protect metals against rust and acid rain.

Aquabond’s water soluble thermoplastic is designed for temporary mounting of hard materials for slicing, dicing, grinding, lapping and polishing, and works well as a chemical etch barrier. Aquabond® comes in 3 different bonding temperatures that can be purchased in puck form. The nomenclature depicts each product’s melting temperature centigrade.

Cads™ is a fiber reinforced, water-based, duct sealant used to pressure seal all types of HVAC systems including metal and flex duct.

Perma Plug® Bentonite is a high‐purity, dust‐free, granular sodium bentonite product for sealing abandoned drill holes and annular spaces. The coarse size allows rapid sinking through standing water. It isroduced from a special, slow swelling sodium bentonite, Perma Plug® ensures plugging the entire length of the drill hole without bridging.

SILVER FILM is a single component, liquid applied, bright aluminum solar reflective coating that will maintain its reflective qualities for many years. It is a high solids, thermoplastic resin based product that maintains superior adhesion to most metals as well as asphaltic, or coal tar pitch roofs. SILVER FILM is highly effective for either pitched or flat surfaces where ponded water conditions occur. SILVER FILM is significantly different to other aluminum colored roof coatings. It contains no asphalt, no fillers and uses high quality automotive grade flake pigment. At 3.5 pounds of aluminum metal flake per gallon it produces a layer of protective metal composite that can provide 7 to 10 years of protection in a single coat.

HydraSeal® is a concrete hardener and is waterborne, non-flammable silicate penetrating solutions. They are specifically designed as a concrete hardener and the stopping of moisture migration or major seepage of concrete decks, slabs, walls, driveways and foundations. Two (2) applications minimum required.

Polytec PU is a one-component, room- temperature curing, highly flexible with excellent polyurethane-adhesive electrical conductivity. Polytec PU has been specifically developed for contacting chip modules on dual interface smart cards. It is used in micro electronics, hybrid and electronic applications. Polytec PU cures at room temperature or accelerated with heat. Polytec PU stands out due to its high flexibility combined with mechanical strength. It is also suitable for electrical contacting of copper surfaces The material can be applied by dispensing, jet-dispensing or manually.