Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Products in Ready-to-Use Products
15,467 Products found in Ready-to-Use Products
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Applications
Product Type
Application Area
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
ELASTOSIL® N 2010
Chemical Family:
Silicones
Product Type:
Potting Compound, 1K (1 component) Adhesive, Solvent free (100% Solids) Sealant, Encapsulant
Cure Method:
Air Dry, Moisture Cure, Chemical Cure
Application Method:
Spray
ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant that cures at room temperature under the influence of moisture. It is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. It exhibits good adhesion to plastics and metals, along with elasticity and durability, making it suitable for a wide range of potential uses.
Wacker Chemie AG
WACKER® AK 150 000 STAB
Product Type:
Torque Transfer Fluid, Damping Fluid
Features:
High Linearity, High Temperature Performance, Heat Resistance, High Flash Point, Good Damping, Good Thermal Stability, Low Solidification Point, Chemical Resistant, Heat Stabilized, Low Odor, Excellent Dielectric Properties, Improved Shear Stability
Chemical Family:
Silicones
WACKER® AK 150 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 150,000 mm²/s. It is enriched with a special heat stabilizer that shields the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 150 000 STAB is especially well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.
Wacker Chemie AG
WACKER® HA - Hybrid Adhesive
Product Type:
Hybrid Adhesive, Solvent free (100% Solids) Adhesive
Compatible Substrates & Surfaces:
Glass, Plastics, Wood
Cure Method:
Moisture Cure, Air Dry
WACKER® HA - Hybrid Adhesive is a high-strength, silicone-free all-purpose adhesive suitable for bonding or repairing many different substrates. It cures at room temperature in the presence of atmospheric moisture to form a permanent hard rubber. The adhesive is almost odorless, non-corrosive, and non-staining. It can be painted over and is weatherable, making it highly resistant to various media such as mineral oils, solvents, acids, and alkalis.
Wacker Chemie AG
HELISOL® XA
Product Type:
Heat Transfer Fluid
Features:
Low Viscosity, Low Pour Point, Good Blocking Resistance, Low Density, High Linearity, High Reliability, Heat Resistance, High Durability, Long Shelf Life, Good Thermal Stability, High Efficiency, Wide Temperature Operating Range, Improved Heat Transfer Efficiency, Very Good Heat Resistance, High Temperature Strength, Anti-Fouling, Odorless, Non Corrosive
Chemical Family:
Silicones
HELISOL® XA is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20 mm²/s. Its chemical structure gives it a remarkable set of properties that distinguish it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits an outstanding property profile.
Wacker Chemie AG
WACKER® AK 2000
CAS Number:
9006-65-9
Functions:
Lubricant, Lubricant (Internal), Lubricant (External), Polishing Agent, Release Agent, Anti-Foaming Agent, Solvent, Water Repellent
Chemical Family:
Siloxanes
Product Type:
Hydraulic Fluids, Heat Transfer Fluid
Certifications & Compliance:
Consumer Product Safety Improvement Act (CPSIA), FDA 21 CFR 176.170, FDA 21 CFR 178.3570, EC No.1907/2006, Regulation (EU) No. 10/2011 (PIM), FDA 21 CFR 176.200, REACH Exempt (Europe), Coalition of Northeastern Governors (CONEG), Regulation (EU) No. 1169/2011, FDA 21 CFR 175.105, FDA 21 CFR 177.1200, Regulation (EU) No. 2019/1021, Directive 2011/65/EC amended through EU/2015/863 (RoHS), FDA 21 CFR 178.3910, BfR 36/2 Recommendation , FDA 21 CFR 181.28, Directive 2000/53/EC, GB 9685-2016, Waste Electrical & Electronic Equipment Directive (WEEE), FDA 21 CFR 178.3120, EC No. 1935/2004, BfR 14 Recommendation, BfR 15 Recommendation, FDA 21 CFR 175.380, BfR Recommendation, FDA 21 CFR 175.300, FDA 21 CFR 177.2260, EU Packaging Directive (94/62/EC), Swiss Ordinance (SR 817.023.21), FDA 21 CFR 177.1210, BfR 36 Recommendation, GB 4806.1-2016, FDA 21 CFR 176.210, FDA 21 CFR 175.390, Regulation (EC) No. 1005/2009, FDA 21 CFR 177.2800, BSE & TSE, FDA 21 CFR 176.180
Synonyms:
Dimethicone
WACKER® AK 2000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 2000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, has low surface tension, resulting in high surface activity, and is chemically highly unreactive.
Wacker Chemie AG
SILRES® BS SMK 550
Product Type:
Solventless & High Solids Coating, Primer
Features:
Consistent High Quality, Water Resistant, Moisture Resistant, General Purpose
Chemical Family:
Silanes, Siloxanes
SILRES® BS SMK 550 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield microemulsions. Such dilute aqueous solutions serve as chemical damp-proofing agents. The WTA has certified the suitability of SILRES® BS SMK 550 for this application.
Wacker Chemie AG
ELASTOSIL® N291
Application Area:
Gaskets
Cure Method:
Moisture Cure, Heat Cure, Air Dry
Application Method:
Screen Coating
Chemical Family:
Silicones
ELASTOSIL® N291 is a free-flowing, ready-to-use silicone rubber that can be vulcanized at room temperature or at high temperatures when exposed to atmospheric moisture. It is specifically designed for printing sealing patterns on various substrates, such as steel or cylinder head gaskets containing or free of sulfur. This can be achieved using silk-screen printing techniques.
Wacker Chemie AG
WACKER® Primer G 719
Product Type:
Solventborne Coating, Primer
Features:
Excellent Substrate Adhesion, Good Adhesion
Application Method:
Dip Coating, Spray, Brush
Chemical Family:
Silanes, Siloxanes
WACKER® Primer G 719 is a solvent-based mixture of siloxanes and reactive silanes used as an adhesion promoter for silicone rubbers. WACKER® Primer G 719 is a solution of siloxanes and reactive silanes in organic solvents. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R plus or LR silicone elastomers (addition curing).
Wacker Chemie AG
ELASTOSIL® N9111 Grey
Product Type:
1K (1 component) Sealant
Application Area:
Gaskets
Cure Method:
Moisture Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® N9111 Grey is a non-slump, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. Due to its shear-thinning nature, this product is easy to apply. The material starts curing upon contact with air humidity. It shows excellent primerless adhesion to many substrates, like glass, aluminum, stainless steel, PA, and PBT.
Wacker Chemie AG
POWERSIL® 590
Product Type:
1K (1 component) Sealant, Insulating Coating
Application Area:
Wire Cables
Cure Method:
Chemical Cure
Chemical Family:
Silicones
POWERSIL® 590 is a purpose-built, thermally stabilized, one-component silicone sealant with a retarded curing process. Its low viscosity makes it easy to cast, and it offers primerless adhesion. This protective silicone sealant is specifically designed for cable jointing applications. In the absence of moisture, POWERSIL® 590 remains in a liquid state for an extended period, preventing the formation of voids.
Wacker Chemie AG
ELASTOSIL® AUX G 3242
Product Type:
Solventborne Coating, Primer
Compatible Substrates & Surfaces:
Silicon, Metal, Glass, Ceramic, Plastics
Features:
Good Adhesion, General Purpose, Excellent Substrate Adhesion
Application Method:
Spray, Brush, Dip Coating
Chemical Family:
Siloxanes, Silanes
ELASTOSIL® AUX G 3242 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).
Wacker Chemie AG
SEMICOSIL® 920 LT A/B
Product Type:
Potting Compound, Encapsulant, 2K (2 component) Adhesive
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SEMICOSIL® 920 LT A/B is a pourable, addition-curing, two-part silicone rubber that cures to a soft silicone gel. It has a 1:1 mixing ratio and exhibits very low viscosity, making it easy to handle and process. This product offers fast curing and forms a soft gel during vulcanization. SEMICOSIL® 920 LT A/B maintains almost constant properties within a wide temperature range, from -100 °C to +200 °C. Additionally, it has a low ion content, ensuring high purity in applications.
Wacker Chemie AG
WACKER® 440 - Glazing and Perimeter
Product Type:
1K (1 component) Sealant
Application Area:
Window Frames
Compatible Substrates & Surfaces:
Steel, Plastics, Copper, Painted Surfaces, Zinc, Masonry, Aluminum, Metal, Glass, Wood, Ceramic, Concrete
Cure Method:
Moisture Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
WACKER® 440 - Glazing and Perimeter is a high-quality silicone sealant specifically designed for various applications such as construction, glass and window building, and industrial use. This one-component, neutral-curing sealant offers outstanding adhesion, a long shelf life, and excellent tooling characteristics. When exposed to atmospheric moisture at room temperature, WACKER® 440 - Glazing and Perimeter undergoes curing and transforms into a permanently flexible silicone rubber.
Wacker Chemie AG
ELASTOSIL® SOLAR 2202 A/B
Product Type:
Potting Compound, Encapsulant, 2K (2 component) Sealant
Cure Method:
Heat Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® SOLAR 2202 A/B is a pourable, addition-curing, RTV-2 silicone rubber used for potting, lamination, and encapsulation purposes. The product vulcanizes at room temperature to yield a very soft silicone gel. Cured ELASTOSIL® SOLAR 2202 A/B demonstrates pronounced inherent tack and excellent long-term stability against weathering, moisture, and sunlight. The soft silicone gel can continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 160°C (320°F) without damage.
Wacker Chemie AG
GENIOSIL® GF 56
Functions:
Adhesion Promoter, Coupling Agent
Chemical Family:
Silanes
Product Type:
Primer
Labeling Claims:
Animal Products-free, BSE-free, TSE-free
GENIOSIL® GF 56 is an alkoxyvinylsilane. It is a clear, colorless liquid with a distinctive aromatic odor. In the presence of moisture, it undergoes hydrolysis (releasing ethanol) to form silanols, which can further react with each other to generate siloxanes. Acting as a bifunctional molecule, GENIOSIL® GF 56 serves as a molecular bridge between organic and inorganic substrates.
Wacker Chemie AG
ELASTOSIL® A 4
Product Type:
Solvent free (100% Solids) Sealant, 1K (1 component) Adhesive
Cure Method:
Moisture Cure
Chemical Family:
Silicones
ELASTOSIL® A 4 is a carbon dioxide-vulcanizing, solventless, one-component, curable elastomer designed for silk screen applications. It is a moisture-curing material with a very long shelf life. Once ELASTOSIL® A 4 is in place on the substrate, the cure may be induced by exposure to a combination of carbon dioxide and moisture. Adhesion may be improved by mildly preheating the substrate.
Wacker Chemie AG
SEMICOSIL® 987 GR
Product Type:
1K (1 component) Adhesive
Application Area:
Gaskets, Power Control Unit (PCU), Electric Vehicle (EV) Batteries, Form In Plastic Gaskets (FIPG), Electrical Components, Housing
Cure Method:
Heat Cure, Chemical Cure
Chemical Family:
Silicones
SEMICOSIL® 987 GR is a one-part, ready-to-use, thermally curable silicone elastomer that exhibits non-slump properties. It is primarily used as a sealing adhesive. The silicone is thixotropic in nature, allowing for easy application and shaping. It offers high flexibility, making it suitable for low-stress adhesive bonding, such as in molded-in-place gasket (FIPG) applications. Additionally, SEMICOSIL® 987 GR provides primerless adhesion to a wide range of substrates.
Wacker Chemie AG
WACKER® AK 600 000 STAB
Product Type:
Torque Transfer Fluid, Damping Fluid
Features:
High Linearity, High Temperature Performance, Heat Resistance, High Flash Point, Good Damping, High Viscosity, Good Thermal Stability, Low Solidification Point, Chemical Resistant, Heat Stabilized, Low Odor, Excellent Dielectric Properties, Improved Shear Stability
Chemical Family:
Silicones
WACKER® AK 600 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 600,000 mm²/s. It is specifically formulated with a special heat stabilizer to provide protection against thermal decomposition and viscosity changes. This makes WACKER® AK 600 000 STAB highly suitable for applications that experience high temperatures and/or shear stress.
Wacker Chemie AG
SILRES® BS 30
Functions:
Binder
Chemical Family:
Siloxanes, Silanes
Product Type:
Sealer, Solventless & High Solids Coating, Solventborne Coating
Application Area:
Facade, Kitchenware
Application Method:
Brush, Spray
Compatible Substrates & Surfaces:
Clay, Marble, Slate, Stone, Wood, Limestone
SILRES® BS 30 is a solventless silicone concentrate based on a mixture of silane and siloxane. In its undiluted form, it provides water and stain repellency to mineral substrates while enhancing their appearance. SILRES® BS 30 is suitable for a wide variety of mineral substrates used in the tile industry, including tumbled marble, limestone, slate, and saltillo clay tile.
Wacker Chemie AG
ELASTOSIL® E92 N Transparent
Product Type:
Solvent free (100% Solids) Sealant, Solventborne Adhesive
Cure Method:
Moisture Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® E92 N Transparent is a transparent, self-leveling silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. This product provides excellent primer-less adhesion to many substrates and is used as a multipurpose glue and for textile coatings, e.g. antislip coatings.
Wacker Chemie AG
POWERSIL® GEL A/B
Product Type:
Potting Compound, 2K (2 component) Sealant
Application Area:
Wires, Wire Cables
Cure Method:
Chemical Cure, Air Dry
Chemical Family:
Silicones
POWERSIL® GEL A/B is a pourable, two-component silicone mixture that cures at room temperature to form a transparent, very soft silicone gel. The resulting vulcanizate exhibits excellent mechanical damping properties, providing effective vibration absorption. Additionally, this gel is non-bleeding, ensuring its stability and integrity over time.
Wacker Chemie AG
ELASTOSIL® RT 778
Product Type:
2K (2 component) Sealant
Application Area:
Gaskets, Lighting Fixtures, White Goods, Form In Plastic Gaskets (FIPG)
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® RT 778 is a non-slump, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 778 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 250°C (482°F) without damage.
Wacker Chemie AG
WACKER® AK 35
CAS Number:
9006-65-9
Functions:
Lubricant, Polishing Agent, Release Agent, Anti-Foaming Agent, Solvent, Water Repellent
Chemical Family:
Siloxanes
Product Type:
Hydraulic Fluids, Heat Transfer Fluid
Certifications & Compliance:
EC No.1907/2006, FDA 21 CFR 176.200, REACH Exempt (Europe), Coalition of Northeastern Governors (CONEG), Regulation (EU) No. 1169/2011, FDA 21 CFR 175.105, Regulation (EU) No. 2019/1021, Directive 2011/65/EC amended through EU/2015/863 (RoHS), Directive 2000/53/EC, Waste Electrical & Electronic Equipment Directive (WEEE), FDA 21 CFR 178.3120, FDA 21 CFR 177.2260, EU Packaging Directive (94/62/EC), FDA 21 CFR 176.210, Regulation (EC) No. 1005/2009, FDA 21 CFR 177.2800, BSE & TSE, FDA 21 CFR 176.180, Consumer Product Safety Improvement Act (CPSIA)
Synonyms:
Dimethicone
WACKER® AK 35 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 35 mm²/s. Its chemical structure imparts exceptional properties to WACKER® AK 35, distinguishing it from organic materials like mineral oils. It exhibits good solubility in a wide range of solvents and demonstrates minimal changes in physical properties across a broad temperature range. These characteristics make it highly versatile and suitable for various applications that require these specific properties.
Wacker Chemie AG
WACKER® AK 12500
CAS Number:
9006-65-9
Functions:
Release Agent, Anti-Foaming Agent, Lubricant, Lubricant (Internal), Lubricant (External), Solvent, Polishing Agent, Water Repellent
Chemical Family:
Siloxanes
Product Type:
Hydraulic Fluids
Certifications & Compliance:
EC No.1907/2006, REACH Exempt (Europe)
Synonyms:
Dimethicone
WACKER® AK 12500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 12500 mm²/s. Its chemical structure gives it exceptional properties that distinguish it from organic materials like mineral oils. It exhibits minimal changes in physical properties over a broad temperature range, excellent water-repellent properties, and good dielectric properties.
Wacker Chemie AG
ELASTOSIL® SOLAR 2205
Product Type:
Potting Compound, Encapsulant, 2K (2 component) Sealant
Cure Method:
Heat Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® SOLAR 2205 is a pourable addition-curing RTV-2 silicone rubber suitable for coating, lamination, and encapsulation purposes. The product cures at room temperature and under heat to yield a soft elastomer. Cured ELASTOSIL® SOLAR 2205 offers excellent long-term stability against weathering, moisture, and UV light. The soft silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.
Wacker Chemie AG
WACKER® CS - Construction Seal
Product Type:
Solventborne Sealant, 1K (1 component) Adhesive
Application Area:
Window Frames
Compatible Substrates & Surfaces:
Copper, Zinc, Aluminum, Metal, Glass, Wood, Ceramic, Concrete, Steel, Plastics
Cure Method:
Chemical Cure, Air Dry, Moisture Cure
Chemical Family:
Silicones
WACKER® CS - Construction Seal is a one-component, neutral-curing silicone sealant specifically designed for construction, glass, and window building applications. This low modulus sealant offers outstanding adhesion, a long shelf life, and excellent tooling characteristics. WACKER® CS - Construction Seal cures at room temperature when exposed to atmospheric moisture, resulting in a permanently flexible silicone rubber.
Wacker Chemie AG
WACKER® AK 60000
Product Type:
Hydraulic Fluids
WACKER® AK 60000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 60000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits minimal change in physical properties over a broad temperature range. It also demonstrates excellent water-repellent properties and good dielectric properties.
Wacker Chemie AG
ELASTOSIL® RT 563
Product Type:
Potting Compound, Encapsulant, 2K (2 component) Sealant
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® RT 563 is a pourable, room-temperature-vulcanizing, condensation-curing, two-component silicone rubber. It exhibits excellent flow and high hardness. This product is specifically designed for encapsulating electronic components. To initiate the curing process, Catalyst T37 can be added for longer pot lives and curing times, or Catalyst T40 for shorter pot lives and curing times.
Wacker Chemie AG
ELASTOSIL® LR 6294 A/B
Product Type:
Solventless & High Solids Coating, 2K (2 component) Coating
Compatible Substrates & Surfaces:
Fibers & Fabrics
Features:
High Tensile Strength, High Solids Content, Fast Curing, High Strength, Good Adhesion, Medium Viscosity, Good Toughness, High Elongation
ELASTOSIL® LR 6294 A/B is a two-component, solventless liquid silicone rubber (LSR) system that cures rapidly upon heating to a tough silicone rubber. This product provides good adhesion and has been formulated primarily as a high-strength, moderate-viscosity liquid rubber for fabric coating applications.
Wacker Chemie AG
ELASTOSIL® 4100
Product Type:
Solventborne Sealant, 1K (1 component) Adhesive
Application Area:
Window Frames, Wires
Compatible Substrates & Surfaces:
Glass, Ceramic, Wood, Coated Surfaces, Plastics, Silicon
Cure Method:
Chemical Cure, Air Dry, Moisture Cure
Chemical Family:
Silicones
ELASTOSIL® 4100 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as sanitary applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.
Wacker Chemie AG
WACKER® AK 20000
CAS Number:
9006-65-9
Functions:
Lubricant, Lubricant (Internal), Lubricant (External), Polishing Agent, Release Agent, Anti-Foaming Agent, Solvent, Water Repellent
Chemical Family:
Siloxanes
Product Type:
Hydraulic Fluids
Certifications & Compliance:
Consumer Product Safety Improvement Act (CPSIA), FDA 21 CFR 176.170, FDA 21 CFR 178.3570, EC No.1907/2006, Regulation (EU) No. 10/2011 (PIM), FDA 21 CFR 176.200, REACH Exempt (Europe), Coalition of Northeastern Governors (CONEG), Regulation (EU) No. 1169/2011, FDA 21 CFR 175.105, FDA 21 CFR 177.1200, Regulation (EU) No. 2019/1021, Directive 2011/65/EC amended through EU/2015/863 (RoHS), FDA 21 CFR 178.3910, BfR 36/2 Recommendation , FDA 21 CFR 181.28, Directive 2000/53/EC, GB 9685-2016, Waste Electrical & Electronic Equipment Directive (WEEE), FDA 21 CFR 178.3120, EC No. 1935/2004, BfR 14 Recommendation, BfR 15 Recommendation, FDA 21 CFR 175.380, BfR Recommendation, FDA 21 CFR 175.300, FDA 21 CFR 177.2260, EU Packaging Directive (94/62/EC), Swiss Ordinance (SR 817.023.21), FDA 21 CFR 177.1210, BfR 36 Recommendation, GB 4806.1-2016, FDA 21 CFR 176.210, FDA 21 CFR 175.390, Regulation (EC) No. 1005/2009, FDA 21 CFR 177.2800, BSE & TSE, FDA 21 CFR 176.180
Synonyms:
Dimethicone
WACKER® AK 20000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits excellent water-repellent properties, good dielectric properties, and low surface tension, resulting in high surface activity.
Wacker Chemie AG
ELASTOSIL® RT 602 A/B
Product Type:
Potting Compound, Encapsulant, 2K (2 component) Sealant
Cure Method:
Heat Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® RT 602 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 9:1 mixing ratio. It has low viscosity and offers rapid heat cure. The cured rubber exhibits a medium hardness and excellent heat stability. This product is suitable as a general purpose encapsulant.
Wacker Chemie AG
WACKER® WN - Weatherseal Neutral (000034072)
Product Type:
Solventborne Adhesive, 1K (1 component) Adhesive, Solvent free (100% Solids) Sealant
Compatible Substrates & Surfaces:
Copper, Zinc, Aluminum, Metal, Glass, Wood, Ceramic, Concrete, Steel, Plastics
Cure Method:
Chemical Cure, Air Dry, Moisture Cure
Chemical Family:
Silicones
WACKER® WN - Weatherseal Neutral (000034072) is a one-component, neutral-curing silicone sealant with a high modulus. It exhibits outstanding adhesion and weather resistance, along with a long shelf life. This sealant is specifically designed for construction, glass, and window building applications. WACKER® WN - Weatherseal Neutral (000034072) cures at room temperature in the presence of atmospheric moisture, resulting in a permanent and flexible silicone rubber. It also offers excellent tooling characteristics.
Wacker Chemie AG
ELASTOSIL® RT 774
Product Type:
2K (2 component) Sealant
Application Area:
Gaskets, Lighting Fixtures, White Goods, Form In Plastic Gaskets (FIPG)
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® RT 774 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 774 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.
Wacker Chemie AG
WACKER® AK 1 000 000 STAB
Product Type:
Torque Transfer Fluid, Damping Fluid
Features:
High Linearity, High Temperature Performance, Heat Resistance, High Flash Point, Good Damping, High Viscosity, Good Thermal Stability, Low Solidification Point, Chemical Resistant, Heat Stabilized, Low Odor, Excellent Dielectric Properties, Improved Shear Stability
Chemical Family:
Silicones
WACKER® AK 1 000 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1,000,000 mm²/s. It is formulated with a special heat stabilizer that protects the silicone fluid from thermal decomposition and viscosity changes. As a result, WACKER® AK 1 000 000 STAB is well-suited for applications involving high temperatures and/or shear stress. It has a low solidification point, good dielectric properties, a high flash point, and is chemically inert.
Wacker Chemie AG
WACKER® AK 20
CAS Number:
9006-65-9
Functions:
Lubricant, Polishing Agent, Release Agent, Anti-Foaming Agent, Solvent, Water Repellent
Chemical Family:
Siloxanes
Product Type:
Hydraulic Fluids, Heat Transfer Fluid
Certifications & Compliance:
EC No.1907/2006, FDA 21 CFR 176.200, REACH Exempt (Europe), Coalition of Northeastern Governors (CONEG), Regulation (EU) No. 1169/2011, FDA 21 CFR 175.105, Regulation (EU) No. 2019/1021, Directive 2011/65/EC amended through EU/2015/863 (RoHS), Directive 2000/53/EC, GB 9685-2016, Waste Electrical & Electronic Equipment Directive (WEEE), FDA 21 CFR 178.3120, FDA 21 CFR 177.2260, EU Packaging Directive (94/62/EC), FDA 21 CFR 176.210, Regulation (EC) No. 1005/2009, FDA 21 CFR 177.2800, BSE & TSE, FDA 21 CFR 176.180, Consumer Product Safety Improvement Act (CPSIA)
Synonyms:
Dimethicone
WACKER® AK 20 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It is chemically highly unreactive, has a low solidifying point, and exhibits high heat resistance.
Show
36
of 15,467 results
Go to page
1
2
3
4
5
6
7
8
9
10