Products results

The Addisil™ 440 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Addisil™ 2050 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

PharMed PharMed Tubing is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of PharMed PharMed Tubing include medical/healthcare, food contact applications and plumbing/piping/potable water.Characteristics include: Chemical Resistant UV Resistant

Polyplastics Group Topas® 6017S-04Product DescriptionTOPAS 6017S-04 is an injection molding grade with a high heat distortion temperature (170°C) and exceptional dimensional stability. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for precision optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has excellent heat resistance to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Precision componentry Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware High Temperature Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Dimensional stability, high tolerances Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6015S-04 - high heat distortion resistance (150°C) for 134°C protocols Topas® 6017S-04Topas® 6017S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Tygon SE-200 is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon SE-200 include food contact applications, medical/healthcare and hose/tubing.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility

Vetronite® EGS T 23 T is composed of epoxy resin and glass fabric reinforement.

Polyplastics Group Topas® Elastomer E-140 is a semicrystalline cyclic olefin material with flexibility. It is a fairly stiff elastomer which can be extruded and injection molded, and can be blended with other TOPAS grades, other olefin resins and elastomers. For an elastomer, E-140 features high moisture barrier and has excellent clarity in thin sections or films. Secondary Tg of -6°C is relatively insignificant in terms of E-140 properties such as low temperature brittleness. The major Tg is below -90°C, while the melting point is about 84°C.

Sylvin™ 86060-70 Clear is a vinyl compound formulated with high molecular weight resin for extruded tubing.

Norprene A60F is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A60F include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

Rubaloy RA - 7573 is a high performance grade, offering excellent ozone, oil and abrasion resistance. It is non-staining and is made from 70% medium ACN content NBR and 30% from PVC Resin.

Paracril OZO3341 is a pre-fluxed blend of NBR/PVC containing 30% PVC and 28% BAN NBR base polymer.

Black 6683 is an economy black LDPE based masterbatch containing high opacity carbon black. This product is designed for general-purpose extruded tubings, sheets and film blowing.

Mediaplast PM is a synthetic aromatic plasticizer based on polyalkylbenzene (bi- and trialkylated aro-matics), which is mainly recommended for the use in elastomers with low to medium polarity, i. e. NR, IIR, BR, SBR, EP(D)M for example, but also CR, CM/CSM, EVA and PNR. Especially in polychloro-prene the often used, expensive ester plasticizers can be replaced completely.

Fainplast Compounds PVC MPH 75/T1 is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Oxy Vinyls 195F is a Polyvinyl Chloride Homopolymer which is white, free flowing powder.

Supreme Petrochem SH2157 used for the production of Refrigerator door, Cabinet liners & accessories Freezer liners Decorative trim Picnic cooler liners Printed materials.

Tygon B-44-4X-I.B. is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon B-44-4X-I.B. include food contact applications, hose/tubing and plumbing/piping/potable water.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility Non-Toxic

Oxy Vinyls 200F is a Polyvinyl Chloride Homopolymer which is white, free flowing powder.

Fainplast Compounds Fainplast™ PVC MPH 73/GT 1 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 73/GT 1 include hose/tubing and medical/healthcare. The primary feature is sterilizable.

Polyimide /PI Glide™ Tubing is a class of high performing polymers well established in industry for their outstanding chemical, thermal, and mechanical performance properties. Polyimides typically do not melt before decomposing; thus, they demonstrate excellent thermal stability in high as well as low temperatures. Polyimides also exhibit good dielectric properties giving them substantial presence in a number of electrical applications. Zeus polyimide tubing brings these properties and more for both medical and non-medical precision tubing applications. Polyimide tubing provides excellent strength and abrasion resistance. Polyimide tubing also maintains its properties even at very small dimensions. For applications where additional lubricity is needed, PI Glide™, a PI / PTFE composite, provides a lower coefficient of friction for reduced surface resistance of the tubing. Zeus polyimide tubing is also available in a layered or composite construction using a combination of PI and PI Glide™ to suit a variety of tubing requirements. Mechanical properties, lubricious surface, and many other tubing properties can be tailored in this way. Choosing Zeus PI and PI Glide™ tubing for your catheter construction needs allows users to consolidate their components with a single best-in-class supplier.

Nylene Nylon 6 polymer designed for use in extrusion of tubing and film to be used in food packaging. High melt strength for shape retention Like most PA6, Nylene 615 NP has excellent grease resistance, toughness, and resistance to abrasion.

Elastocon® STK56PA a colorable thermoplastic elastomer that has been developed for applications that require soft rubber-like properties and a good surface finish. Elastocon® STK56PA is well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK56PA can be overmolded to polyamide/nylon.Elastocon® STK56PA is supplied as ready to use pellets in 50 lb. bag quantities.

Rubaloy RA - 7047 is a unique blend of Nitrile Rubber with PVC, specially made to offer very high ozone, weather, oil, and abrasion resistance in the products. It offers good tensile strength and elongation along with extremely low gas permeability. It is suitable to produce molded and extruded products.

Nylene High viscosity nylon copolymer with high impact resistance and superior flexibility Optimized with good melt strength for high line speeds in thin wall sections 2415 HSSP BK is one of a family of grades specifically designed for the convoluted tubing used n the Automotive and Electrical industry, but can also be used for other extrusions and some molded parts.

KPC® KLC-25 by Kadakia Plastics and Chemicals is a general purpose, flexible polyvinyl chloride (PVC) grade. Is suitable for processing by profile extrusion. Possible applications of KPC® KLC-25 could be complex profiles & shapes, hose tubing, tapes & fiber coating and sleeving.

PTFE EXTRUSION TUBE is manufactured by high pressure PTFE dispense resin mixed with additive, it is extruded and sintered. According to different demands, the tubing could be opaque or translucent.

Vetronite® EGS 102 T is composed of epoxy resin and glass fabric reinforement.

Silopren™ LSR 2670 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2070, Silopren™ LSR 2670 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2670 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2670 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Keypads Vibration dampers Pressure cookers parts Spark plug boots, catheters, parts of medical technical equipment s.o.

Nylon 6 - Mighty Tough plasticized extrusion grade for tubing/profile applications.

Elastocon® STK40B is a black thermoplastic elastomer that has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK40B is well suited for consumer goods and industrial applications requiring non-slip/soft dry-touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK40B can be overmolded to PC, ABS, PC/ABS, Acrylic, PS, copolyester, various grades of polyamide, and more.Elastocon® STK40B is supplied as ready to use pellets in 50 lb. bag quantities.

Fainplast Compounds Fainplast™ PVC MPH 83 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 83 include medical/healthcare and hose/tubing.

PBY Plastics PB21000M is a compression molded virgin Poly(Fluorinated Ethylene-Propylene) copolymer (FEP) premium grade.

Miracll Chemicals E 195 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Sylvin Technologies Sylvin™ 913-80 Natural is a flexible polyvinyl chloride (PVC) compound formulated for profile and tube extrusion applications that require a non migrating plasticizer for improved heat and chemical resistance.

Rulon® 641 is manufactured from FDA compliant materials which possess excellent load and wear characteristics.It offers excellent, continuous non-lubricated service up to 10,000 PV - higher for intermittent service. While the load capacity of Rulon 641 is generally limited to 1,000 psi at room temperature, deformation is a function of wall thickness, temperature and load.Its compatibility with a wide array of mating surfaces, including mild steel, 303 and 316 stainless steels, as well as harder materials, make it a good choice for most food and pharmaceutical bearing applications.