Products results

Trelleborg Industries UK PVC is available in rigid and flexible forms. PVC can be extruded in a wide range of durometers and colors to meet virtually any need. Medical grade PVC tubing is resistant to many chemicals, solvents, corrosion and has a long life expectancy. It is also resistant to most sterilization methods. It’s extremely smooth surface provides maximum fluid flow characteristics, reducing sediment build up which could lead to bacterial growth.

Oxy Vinyls 216S is suspension PVC resin designed for rigid applications.

Elastocon® 3353 is a white S-B-S thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 3353 is heat sealable and well suited for consumer goods and extruded tubing and profile applications. Elastocon® 3353 can be overmolded and/or coextruded onto polystyrene.Elastocon® 3353 is supplied as ready to use pellets in 50 lb. bag quantities.

LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.

Elastocon® STK60 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60 can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60 is supplied as ready to use pellets in 50 lb. bag and 1000 lb. bulk quantities.

Fainplast Compounds PVC MPH 85/XT is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Trelleborg Industries UK Nylon which are nylons are a family of synthetic polymers known as polyamides. They can be used to make mechanical parts such as gears and screws, and can also be extruded. Nylons are lightweight and resistant to corrosion and abrasion. FDA and USP Class VI grades are available. Medical tubing applications include suction, drainage, feeding tubes, dialysis, peristaltic pumps and other surgical procedures.

Polyplastics Group Topas® 6013M-07Product DescriptionTOPAS 6013M-07 is an injection molding grade with a wide processing window, especially suited for blow molding processes including IBM and ISBM. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (130°C) heat distortion temperature to withstand 121°C steam sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) TOPAS 5013L-10 - high flow grade; lubricated version for greater processing versatility TOPAS 5013S-04 - high flow grade without lubricant Topas® 6013M-07Topas® 6013M-07 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Copolymer Good Esthetics

Goodyear Rubber Company of So. California Silicone rubber is an elastomer different from other rubbers in that it has an inorganic backbone made of silicon and oxygen atoms. Organic rubbers have a carbon-carbon chain atomic structure. The outstanding physical property of silicone is its’ retention of flexibility and tensile strength at relatively high and low temperatures, from -150 F to 600 F. Silicones are very flexible due to large bond angles and bond lengths compared to basic organic polymers. Silicone rubber is a material of choice where retention of shape and mechanical strength are desired under heavy thermal stress or sub-zero temperatures. Silicone rubber is highly inert and does not react with most chemicals and due to its structural properties, it is widely used in aircraft engine parts, door and window sealing parts, healthcare and medical applications including implants.

PermaFelx® 45 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

PHOENIX™ 04351 is a Low melt flow index. RoHS compliant. Conform to FDA. Suitable for extrusion, cable and wire sheath, medical tube, film.

Tygon B-44-4X is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon B-44-4X include food contact applications, hose/tubing and plumbing/piping/potable water.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility Non-Toxic

Elastocon® STK40B is a black thermoplastic elastomer that has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK40B is well suited for consumer goods and industrial applications requiring non-slip/soft dry-touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK40B can be overmolded to PC, ABS, PC/ABS, Acrylic, PS, copolyester, various grades of polyamide, and more.Elastocon® STK40B is supplied as ready to use pellets in 50 lb. bag quantities.

Elastocon® CLR65 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, high strength properties and a tactile surface finish. Elastocon® CLR65 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR65 can be overmolded onto polypropylene.Elastocon® CLR65 is supplied as ready to use pellets in 1000 lb. quantities.

Elastocon® 8068N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068N can be overmolded to polypropylene.Elastocon® 8068N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

WellsStat - Antistatics can be added to polymers to minimize the natural tendency of most plastics to accumulate static charges. Antistatics are based mainly based on migratory additive systems, which can give fast and long term stable antistatic properties. Migratory additives rely upon the presence of atmospheric humidity to give optimum performance.

Guarniflon TEKCLEAN/ANTIBACTERIAL is a wide range of PTFE grades - virgin and compounded - certified and approved according to international standards for food and drinking applications. A wide range of virgin and filled PTFE grades certified and approved according to international standards for applications in the food and drinking water sectors.

Mediaplast EV/F is an effective processing aid for the treatment of very sticky polymers, mainly EVA compounds. EVA types with a vinyl acetate content of more than 40 % tend to stick to open mills, internal mixers and even extruder screws.

Fluran F-5500-A is a Fluoroelastomer product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Chemical Resistant Corrosion Resistant UV Resistant Weather Resistant

Norprene A60F is a Thermoplastic Elastomer (TPE) product. It is available in North America. Applications of Norprene A60F include hose/tubing, sealing applications and wire & cable.Characteristics include: Heat Resistant Wear Resistant

Kettlitz-Dispergator FD is a highly effective processing aid for compounds in alimentary contact. It has been developed referring to the regulations of FDA and BfR XXI (former BGVV resp. BGA regulation). It is a combination of zinc salts and hydrocarbons in surface active agents.

Silopren™ LSR 4030 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4030 can be used to produce medical technical articles with high transparency and excellent rubber like properties.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 4030 are distinguished by the following properties: high stability to ozone and ultraviolet light neutral odor and taste sterilisable with ethylen oxide, steam and gamma radiation good transparency high thermal stability high recovery after puncture easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4030 is particularly suitable for the following elastomeric articles: sealing elements, O-rings, diaphragms, bellows, catheters, baby teats, respiratory devices, vibration dampers, mats, parts for medical technical equipments.

GRP BUTYL RECLAIM GRP BRI75 is made from used butyl tubes. When incorporated in recipe provides faster mixing & extrusion, reduced power consumption. It is best suited for inner tubes, tire inner liner, adhesives, cable compound. Butyl rubber is a synthetic rubber, a copolymer of isobutylene with isoprene. Generally it’s called as IIR. It stands for isobutylene isoprene rubber. Butyl rubber is impermeable to air and used in many applications requiring an airtight rubber. The first major applications of butyl rubber are tire inner tubes and Inner Liner. Some other applications are adhesives, bladders, sealants and chewing gum.

Elastocon® 8058HL is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8058HL is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8058HL can be overmolded to polypropylene.Elastocon® 8058HL is supplied as ready to use pellets in 1000 lb. quantities.

Astlett Rubber Inc SKI-3S is produced by solution polymerization of isoprene with titanium as the catalyst. The rubber is stabilized by a non-staining BHT antioxidant that is approved for medical purposes and alimentary product uses. SKI-3S can be mixed with natural and synthetic rubbers and is non-staining.

Haftolat or the dry form, Haftolat/P, are very effective process aids produced from EPM rubber. I

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Mediaplast PM is a synthetic aromatic plasticizer based on polyalkylbenzene (bi- and trialkylated aro-matics), which is mainly recommended for the use in elastomers with low to medium polarity, i. e. NR, IIR, BR, SBR, EP(D)M for example, but also CR, CM/CSM, EVA and PNR. Especially in polychloro-prene the often used, expensive ester plasticizers can be replaced completely.

Elastocon® 8068BL is a black lubricated thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8068BL is well suited for consumer goods and industrial applications requiring increased U.V. stability. Elastocon® 8068BL can be overmolded to polypropylene.Elastocon® 8068BL is supplied as ready to use pellets in 1000 lb. quantities.

The Addisil™ IND 1050 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Silopren™ LSR 2665 by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace, Automotive and Aviation. It is available in Liquid form.

The Addisil™ 442 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

MARFRAN.MED® ST has a high versatility to satisfy every request, all materials can be colored and available in transparent or crystal, suitable for both production by injection molding and for extrusion.

The Addisil™ 450 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).

Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer