Products results : Automotive Applications

TPE-S, Shore A70, translucent

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

TPE-S, Shore A70, translucent

TPE-S, Shore A55, translucent

TPE-S, Shore A70, also suitable for extrusion, food compliant according to 10/2011 EG

TPE-S, Shore A55, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A60, natural

ELASTIL™ combines excellent material performances of thermoplastic elastomer with our know-how of bead foam. In addition, we have well-experienced foaming and molding technologies, product design skills and customization technology therefore we can propose finished products (moldings) as our solutions.

TPE-S, Shore A55, black

Badaflex® TPE-S 60A 1344 LD GR by Bada AG is comprised of Styrene Ethylene Butylene Styrene. It is commonly used It is available in Granules form.

TPE-S, Shore A60

TPE-S, Shore A65, translucent

TPE-S, Shore A70, natural

BARLOG plastics GmbH Kebaflex® / SG 90 A.02 is a TPE-S, Shore A90, natural. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A77, good wear behavior, translucent

TPE-S, Shore A69, black, modified for good adhesion to ABS, PC and ABS / PC blends.

BARLOG plastics GmbH Kebaflex® SG 95 A.01 black is a TPE-S, Shore A95, black. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

Aronkasei AR-770 is styrene type elastomer AR.

TPE-S, Shore A55, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

TPE-S, Shore A60, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A57, black

TPE-S, Shore A64, modified for very good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

TPE-S, Shore A60, modified for good adhesion, etc. On PBT and PBT blends.

BARLOG plastics GmbH Kebaflex® / S D50 A.02 Black is a TPE-S, Shore D50, black. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A60, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12

TPE-S, Shore A50, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

BARLOG plastics GmbH Kebaflex® S 95 A.01 is a TPE-S, Shore A95, translucent. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A80, natural, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A40, black, with improved compression set at high temperatures

TPE-S, Shore A80, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

TPE-S, Shore A76, black, modified for good adhesion to ABS, PC and ABS / PC blends. Also suitable for automotive interior applications.

BARLOG plastics GmbH Kebablend® / MW FE 181101 TPE is a development product based on TPE for the production of soft magnetic components. The material has a Shore A 80 hardness.

TPE-S, Shore A50, black

TPE-S, Shore A68, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

BARLOG plastics GmbH Kebaflex® / S FE190902 Translucent is a TPE-S, Shore A86, very good wear behavior, translucent. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / S FE 160602 is a TPE-S, Shore D40, also suitable for extrusion, food-compliant according to Regulation (EU) No. 10/2011. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.