Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products results
1,837 Products found
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
Nylatron® 703 XL PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Plates
Features:
Bearing Grade, Wear Resistant, High Strength, High Loading Absorption Capability, Excellent Toughness, Low Thermal Expansion, High Performance, Good Electrical Properties, Good Mechanical Properties
Density:
1110.0 - 1110.0 kg/m³
Tensile Modulus:
2750.0 - 2750.0 MPa
Nylatron® 703 XL, a unique, ultra-high performance bearing grade made from Polyamide PA6. This material offers exceptional wear resistance, even better than Nylatron® NSM, while also providing superior load bearing capabilities and a near zero level of stick-slip.Features:Ultra-high performance bearing gradeBetter wear resistance than Nylatron® NSMSuperior load bearing capabilitiesNear zero level of stick-slipBenefits:Provides an extraordinary amount of motion control for high-precision applicationsElimination of stick-slip improves performance in high-precision applicationsIdeal for wear-intensive applicationsApplications:Wear padsConveyor componentsCorner tracksPneumatic control surfacesConstruction and heavy equipment marketsMade from a high performance cast nylon 6, Nylatron 703 XL is suitable for heavy-duty, high-load and high-speed applications where the highest level of wear resistance and load-bearing capabilities are required. It offers improved performance and longer service life than other materials. It is a cost-effective solution for construction, heavy equipment and other industrial markets that demand high-performance and durability.
Mitsubishi Chemical Group Corporation
Duratron® U2200 PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
Food Contact Acceptable, Low Thermal Expansion, Low Odor, Amorphous, High Tolerance, Dimensional Stability, High Strength to Weight Ratio, High Temperature Resistance, High Tensile Strength, High Rigidity
Density:
1410.0 - 1410.0 kg/m³
Color:
Brown
Duratron® U2200 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, high temperature resistance, and a low Coefficient of Linear Thermal Expansion. With 20% glass-reinforcement, Duratron® U2200 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:20% glass-reinforced for exceptional rigidity and dimensional stabilityHigh temperature resistanceLow Coefficient of Linear Thermal ExpansionExceptional strength-to-weight ratio and increased tensile strengthGreat electrical insulatorBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability, low thermal expansion and electrical insulation is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsElectrical insulationApplications that require dimensional stability, high temperature resistance and low thermal expansionDuratron® U2200 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments while providing electrical insulation, Duratron® U2200 PEI is the ideal solution.
Mitsubishi Chemical Group Corporation
Fluorosint® 500 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Plates, Rods
Features:
Good Tribological Properties, Good Mechanical Properties, Good Stability, Wear Resistant, Low Deformation Tendency, High Tolerance, Odorless, High Performance, Excellent Hydrolysis Resistance, Dimensional Stability, Chemical Resistant, Service Life Extension, Non Abrasive, Low Friction
Density:
2320.0 - 2320.0 kg/m³
Tensile Modulus:
1750.0 - 1750.0 MPa
Color:
Tan
Fluorosint® 500 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added stability and wear resistance. This material is designed to excel in demanding applications where high performance, reliability, and tight dimensional control are required.Key features:Nine times greater resistance to deformation under load than unfilled PTFE: provides excellent wear and deformation resistanceLow coefficient of linear thermal expansion: approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, eliminating fit and clearance problems for designersPTFE base: provides excellent chemical resistance, low friction, and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:High resistance to deformation under load, making it ideal for sealing applications where tight dimensional control is requiredLow coefficient of linear thermal expansion, eliminating fit and clearance problems in high temperature and dynamic environmentsEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Sealing applications where tight dimensional control is requiredHigh temperature and dynamic environments where fit and clearance are a concernChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires stability and wear resistance in harsh environments.Fluorosint® 500 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added stability and wear resistance, Fluorosint® 500 is an excellent choice for applications in chemical processing, aerospace, automotive and other industries where tight dimensional control and high-performance sealing are required.
Mitsubishi Chemical Group Corporation
Ketron® CM GF30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Creep Resistant, Corrosion Resistant, Good Stability, High Strength, High Tolerance, Odorless, Dimensional Stability, Chemical Resistant, High Stiffness, High Flexural Modulus
Density:
1590.0 - 1590.0 kg/m³
Tensile Modulus:
5858.2 - 5858.2 MPa
Color:
Black
Ketron® CM GF30 Polyetheretherketone PEEK, a compression-molded, 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This brownish-grey colored material is designed for applications where high strength, stiffness, and stability are needed in extreme environments. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for large structural applications that require superior strength, stiffness, and stability Benefits: Offers a higher stiffness and creep resistance than Ketron 1000 PEEK Has a much better dimensional stability Ideal for structural applications carrying high static loads for long periods of time at elevated temperatures Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® CM GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® CM GF30 PEEK is the ideal solution. However, it is important to note that the glass fibers tend to abrade the mating surface so the suitability for sliding parts should be carefully examined.
Mitsubishi Chemical Group Corporation
Nylatron® SLG PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Plates, Rods
Features:
High Rigidity, Food Contact Acceptable, Lubricated, Heat Stabilized, Good Mechanical Properties, Low Coefficient of Friction, Wear Resistant, High Strength, Excellent Mechanical Strength, Self Lubricating, Excellent Toughness, Good Electrical Properties, Good Sliding Properties, Service Life Extension
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® SLG Polyamide PA6 oil-filled shapes are the perfect solution for industrial applications that require low coefficient of friction, high mechanical strength and rigidity, and outstanding wear resistance. Developed specifically for non-lubricated, highly loaded, and slowly moving parts, these shapes offer a number of benefits over conventional cast nylon grades.Features:Broadest size range availabilityExcellent wear resistanceGood mechanical and electrical propertiesIdeal balance of strength and toughnessInternally lubricated and heat stabilizedBenefits:Low coefficient of friction and sliding propertiesHigh mechanical strength and rigidityOutstanding wear resistanceLonger service life and lower maintenance costs compared to conventional cast nylon gradesApplications:Ideal for use in industrial environmentsSuitable for non-lubricated, highly loaded, and slowly moving parts such as gears, bearings, bushings, and wear pads.
Mitsubishi Chemical Group Corporation
Semitron® ESd 410C PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
ESD Protection, High Tolerance, Static-Dissipative, Odorless, Low Water Absorption, Low Thermal Expansion, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
5850.0 - 5850.0 MPa
Color:
Black
Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.
Mitsubishi Chemical Group Corporation
Semitron® ESd 420V PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Rods, Tube, Plates
Features:
Dimensional Stability, High Stiffness, ESD Protection, High Strength, High Tolerance, Static-Dissipative, Odorless
Density:
1480.0 - 1480.0 kg/m³
Tensile Modulus:
5450.0 - 5450.0 MPa
Color:
Black
Semitron® ESd 420V PEI Polyetherimide electro static dissipative shapes, a high-performance material designed for use in the semiconductor and electronics industries. With its unique combination of properties, this grade offers a range of benefits for device handling and test applications.Features:High strength and stiffness, making it suitable for extreme structural applicationsExcellent resistivity in the 10E5 to 10E8 ohms per square range, ensuring reliable electrostatic dissipationHeat deflection temperature of 419° F / 215° C, making it suitable for high temperature environmentsNot subject to dimensional change as a result of exposure to moistureBenefits:Suitable for use in a range of applications within the semiconductor and electronics industriesOffers reliable performance in extreme conditionsCost-effective alternative for applications that do not require the thermal performance of ultra-high performance materialsApplications:Device handling and test applications within the semiconductor and electronics industriesSuitable for use in high temperature environments, including extreme structural applications.
Mitsubishi Chemical Group Corporation
Duratron® PEI U2300
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
High Tensile Strength, High Rigidity, Food Contact Acceptable, Low Thermal Expansion, Heat Resistance, Flame Retardant, Low Odor, High Strength, Amorphous, High Tolerance, Dimensional Stability, High Strength to Weight Ratio
Density:
1510.0 - 1510.0 kg/m³
Tensile Modulus:
5513.6 - 5513.6 MPa
Color:
Brown
Duratron® U2300 PEI, a flame resistant Polyetherimide that offers exceptional rigidity, strength, dimensional stability, and heat resistance. With 30% glass-reinforcement, Duratron® U2300 PEI is the most durable and high-performance plastic offered in the Duratron® PEI line.Features:30% glass-reinforced for highest rigidity, strength, dimensional stability, and heat resistanceFlame resistantLowest Coefficient of Linear Thermal ExpansionSuperior strength-to-weight ratio and tensile strengthBenefits:Ideal for reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, and structural components that require high strength and rigidity at elevated temperaturesCan withstand harsh conditions and high temperaturesSuitable for a wide range of applicationsApplications:Reusable medical devicesAnalytical instrumentsElectrical insulatorsSemiconductor process componentsStructural components that require high strength and rigidity at elevated temperaturesDuratron® U2300 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions and high temperatures. Whether you are looking to improve the performance of your reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, or need a material that can withstand high temperatures and harsh environments, Duratron® U2300 PEI is the ideal solution. Try it today and experience the difference for yourself!
Mitsubishi Chemical Group Corporation
Sultron® LSG FG R5100 PPSU
Polymer Name:
Polyphenylsulfone (PPSU)
Physical Form:
Plates, Rods
Features:
High Ductility, Biocompatible, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, Acid Resistant, Alkali Resistant, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Excellent Hydrolysis Resistance, Excellent Sterilization Resistance, X-Ray Sterilizable
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
2450.0 - 2450.0 MPa
Color:
Black
Sultron® LSG FG R5100 PPSU is a product available in the form of plates and rods, and it possesses various important features. These include being ethylene oxide sterilizable, biocompatible, excellent sterilization resistance, X-ray sterilizable, alkali resistant, life science grade, gamma sterilizable, steam sterilizable, acid resistant, heat sterilizable, plasma gas sterilizable, excellent hydrolysis resistance, and high ductility. It comes in the color black and finds applications in equipment and parts, implants and prosthetics, medical devices and assemblies, surgical instruments, and trays, as well as connectors in the medical field.
Mitsubishi Chemical Group Corporation
Nylatron® MC® 907 PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Heat Aging Resistant, High Hardness, Food Contact Acceptable, Creep Resistant, Heat Stabilized, Good Mechanical Properties, Wear Resistant, High Strength, Excellent Toughness, Good Electrical Properties, Good Machinability
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Nylatron® MC 907 PA6 and Ertalon® 6PLA PA6 are unmodified cast nylon 6 grades that offer the highest strength and hardness of all nylon 6 grades. They exhibit great creep and wear resistance, heat aging properties, and machinability capabilities, making them ideal for the food processing and packaging industry.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding properties and excellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma- and X-rays)Good machinabilityBenefits:High strength and hardness for maximum durability and longevityExcellent creep and wear resistance for minimal maintenance and replacement costsHeat aging properties ensure long-term performance in high-temperature environmentsGood machinability for easy customization and shapingFDA and EU food contact compliant composition for safe and hygienic use in food processing and packaging applicationsApplications:GearsRollersWheelsBearingsConveyor wear partsAnd more in the food processing and packaging industry.
Mitsubishi Chemical Group Corporation
Altron™ LSG PC
Polymer Name:
Polycarbonate (PC)
Physical Form:
Plates, Rods
Features:
No Animal Derived Components, Biocompatible, Gamma Sterilizable, Hydrocarbon Resistant, Life Science Grade, Plasma Gas Sterilizable, Excellent Dielectric Properties, Acid Resistant, Alkali Resistant, Ethylene Oxide Sterilizable, Odorless, Excellent Toughness, Impact Resistance, Hot Water Resistant, X-Ray Sterilizable
Density:
1200.0 - 1200.0 kg/m³
Tensile Modulus:
2400.0 - 2400.0 MPa
Color:
Transparent
Altron™ LSG PC is a polymer made from polycarbonate (PC) and is available in the form of plates and rods. It boasts a wide range of features, including hydrocarbon resistance, ethylene oxide sterilizability, impact resistance, hot water resistance, biocompatibility, X-ray sterilizability, alkali resistance, excellent toughness, life science grade, no animal-derived components, gamma sterilizability, odorlessness, excellent dielectric properties, and acid resistance. Transparent in color, it finds applications in medical devices and assemblies, as well as in housings and enclosures, including those for medical device housings, analyzers, and bioreactor equipment.
Mitsubishi Chemical Group Corporation
Ertalyte® Sterra™ PET
Polymer Name:
Polyethylene Terephthalate (PET)
Color:
Black
Physical Form:
Rods, Bars
Ertalyte® Sterra™ PET is an unreinforced, semi-crystalline grade that is produced from proprietary resin grades made by Mitsubishi Chemical Advanced Materials. Characterized by its excellent wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, this grade is capable of sustaining high loads and retains more of its original strength up to 180°F (85°C) than nylons or acetals. Due to these characteristics, Ertalyte® Sterra™ PET components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing and packaging, and oil and gas industries. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ertalon® 66 SA PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Tube, Plates, Rods
Features:
Food Contact Acceptable, Excellent Stiffness, High Melting Point, Wear Resistant, High Strength, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability, X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3550.0 - 3550.0 MPa
Ertalon® 66 SA / Nylatron® 101 Polyamide PA66 unmodified shapes are characterized by their superior combination of strength and toughness. Compared to other unmodified nylon grades, Nylatron® 101 PA66 / Ertalon® 66 SA PA66 components possess superior mechanical strength, stiffness, wear resistance, in addition to displaying one of the highest melting points of all PA66 materials. Due to these properties, and this grade’s FDA and EU food compliant composition, Nylatron® 101 PA66 / Ertalon® 66 SA PA66 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels, and seals.
Mitsubishi Chemical Group Corporation
Ertalon® LFX PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Excellent Stiffness, Lubricated, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Ertalon® LFX PA6 / Nylatron® LFX Polyamide PA6 internally lubricated shapes are specially formulated to withstand the demands of unlubricated, highly loaded, and slowly moving parts applications. This high-performance material offers a unique combination of mechanical properties, including high strength, stiffness, hardness, and toughness, as well as excellent sliding properties, high mechanical damping capabilities, and exceptional electrical insulation properties.Features:Internally lubricatedHigh mechanical strength, stiffness, hardness, and toughnessExcellent sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Can withstand the demands of unlubricated, highly loaded, and slowly moving parts applicationsOffers a unique combination of mechanical propertiesProvides excellent performance in extreme conditionsMinimizes the need for external lubricationApplications:Pharmaceutical, biotechnology, medical, and processing marketsIdeal for use in unlubricated, highly loaded, and slowly moving parts applications such as gears, bearings, and bushingsCan be used in a wide range of industries where high performance, durability, and low maintenance are required.
Mitsubishi Chemical Group Corporation
Nylatron® NSM PA6
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Tube, Plates, Rods
Features:
Wear Resistant, High Loading Absorption Capability, Self Lubricating, Lubricated
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® NSM Polyamide PA66 is a high-performance thermoplastic that is designed to provide exceptional wear resistance and long-term durability in a wide range of industrial applications. This solid lubricant-filled, proprietary cast nylon formulation offers superior self-lubricating properties, outstanding friction behavior, maximum wear resistance, and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades.Features:The most wear-resistant thermoplastic availableSelf-lubricating with outstanding friction behaviorDynamic load-bearing capacity up to 5x higher than standard cast nylonsService life up to 10x longer than standard cast nylonsBenefits:Provides exceptional wear resistance and long-term durabilityIdeal for high-velocity applications requiring larger geometriesSuitable for a wide range of industrial applicationsApplications:BearingsGearsWear padsPulleysSheavesBushingsValve seatsSealsNylatron® NSM Polyamide PA66 is an ideal solution for industrial applications in the conveying and processing industries and other applications that require a high-performance thermoplastic material with superior wear resistance. This grade is often used as a solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats, and seals, and has the ability to last up to 10 times longer than standard nylon grades, making it a perfect choice for high-velocity, unlubricated moving parts requiring larger geometries.
Mitsubishi Chemical Group Corporation
Nylatron® LIG PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Low Coefficient of Friction, High Strength, Self Lubricating, Lubricated, Excellent Toughness, Good Electrical Properties, Good Mechanical Properties
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® LIG Polyamide PA6, a self-lubricating, oil-filled nylon that is the perfect solution for industrial applications in the conveying and processing industries. With its unique combination of features, this material offers a range of benefits for a variety of applications.Features:Self-lubricating, oil-filled nylonHigher toughness and limiting pressure velocity when compared to unfilled gradesLow coefficient of frictionBenefits:Enhances load bearing performance and reduces the coefficient of frictionProvides a solution for industrial applications in the conveying and processing industriesApplications:Ideal for use in bushings, bearings, roller wheels, and valve seats and sealsSuitable for use in a wide range of industrial applications where self-lubricating materials are required.
Mitsubishi Chemical Group Corporation
Duratron® T5530 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Rigidity, Good Stiffness, Creep Resistant, Temperature Resistance, Low Thermal Expansion, High Tolerance, High Loading Absorption Capability, Odorless, Good Electrical Properties, Dimensional Stability
Density:
1600.0 - 1600.0 kg/m³
Tensile Modulus:
6892.0 - 6892.0 MPa
Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.
Mitsubishi Chemical Group Corporation
Nylatron® GSM PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Low Coefficient of Friction, High Strength, High Loading Absorption Capability, Excellent Toughness, Good Electrical Properties, High Impact Resistance, Good Mechanical Properties
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® GSM Polyamide PA6, a unique material that combines the benefits of Molybdenum Disulphide (MoS2) with the impact resistance of cast nylon products. This material is specifically designed to enhance load-bearing capabilities while maintaining its strength and toughness.Features:Contains finely divided particles of Molybdenum Disulphide (MoS2)Enhances load-bearing capabilitiesMaintains impact resistance inherent to cast nylon productsPossesses an ideal combination of strength and toughnessExhibits excellent mechanical and electrical propertiesBenefits:Can withstand high pressure and heavy loadsResistant to impact and wearProvides stability and durability in various applicationsCan be used in high-precision and automated equipmentApplications:GearsBearingsSprocketsSheavesConstruction and heavy equipment marketsNylatron® GSM Polyamide PA6 is an ideal solution for industries that require materials with high load-bearing capabilities, excellent impact resistance, and strong mechanical and electrical properties.
Mitsubishi Chemical Group Corporation
Nylatron® MC 901 H.S. PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, Good Thermal Stability, High Rigidity, High Hardness, Heat Stabilized, Good Mechanical Properties, Wear Resistant, High Strength, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Good Electrical Properties, Electrically Insulating
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Color:
Blue
Nylatron® MC 901 Heat Stabilized (HS) Polyamide PA6 shapes are a durable and versatile solution for industrial applications that require long-term thermal stability and high mechanical properties.Features:Long-term thermal stability up to 260° F (126° C)Outstanding mechanical strength, rigidity, hardness, and toughnessGreat sliding properties and wear resistanceSuperior resistance to high-energy radiationExcellent electrical insulationBenefits:Provides reliable performance in high temperature environmentsResists wear and tear in industrial applicationsOffers high resistance to high-energy radiationProvides excellent electrical insulationApplications:Conveyor wear componentsBushingsSheavesWear padsValve seats and sealsCustom parts and gearswheels
Mitsubishi Chemical Group Corporation
Ertacetal® H-TF POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Plates
Features:
Excellent Stiffness, Lubricated, Low Moisture Absorption, Low Coefficient of Friction, Wear Resistant, High Strength, Improved Wear, Slip, Soft, Good Machinability, Good Sliding Properties, Low Friction
Density:
1500.0 - 1500.0 kg/m³
Tensile Modulus:
3100.0 - 3100.0 MPa
Ertacetal H-TF (POM-H + PTFE) is a Delrin® AF Blend, a combination of PTFE fibers evenly dispersed in a Delrin acetal resin. This material offers superior sliding properties, making it ideal for bearings, gears, and other low-friction applications. Compared to Ertacetal C and H, Ertacetal H-TF offers improved performance and longer wear life.Features:Low friction, long wearingHigh strength and toughnessHigh dimensional stability and machinabilityPTFE fibers evenly dispersed in a Delrin acetal resinBenefits:Reduced stick-slip behavior in bearings and other low-friction applicationsIncreased wear resistance and longer lifespanImproved performance in harsh environmentsFood-contact compliant for use in the food processing and packaging industryApplications:BearingsGearsPulleysConveyor wear partsAny other low-friction application requiring high strength and dimensional stability.
Mitsubishi Chemical Group Corporation
Nylatron® LFX PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Excellent Stiffness, Lubricated, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Nylatron® LFX Polyamide PA6, a specially formulated internally lubricated material designed for unlubricated, highly loaded, and slowly moving parts applications. This advanced material offers a range of exceptional properties that make it a top choice for various industries, including pharmaceutical, biotechnology, medical, and processing.Features:Internally lubricated for unlubricated, highly loaded, and slowly moving parts applicationsHigh mechanical strength, stiffness, hardness, and toughnessGreat sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Excellent wear resistance and easy machiningLow coefficient of frictionHigher values of PV (pressure / velocity)Good resistance to high energy radiations (Gamma and X Rays)High mechanical damping capacityGood sliding and thermal insulation propertiesApplications:Pharmaceutical, biotechnology, medical and processing industriesIdeal for use in gears, bearings, sprockets, and sheavesSuitable for use in various machinery and equipment
Mitsubishi Chemical Group Corporation
Semitron® MP-370
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates
Features:
Good Stability, Low Moisture Absorption, High Strength, High Tolerance, Odorless, Excellent Toughness, High Performance, Good Machinability, Dimensional Stability, Good Thermal Stability
Density:
1650.0 - 1650.0 kg/m³
Tensile Modulus:
4450.0 - 4450.0 MPa
Color:
Grey
Semitron® MP 370 shapes exhibit excellent moisture absorption and thermal resistance, while also maintaining outstanding strength and dimensional stability. As a result, this grade is often selected for test socket applications where precision machining is critical, and complex geometries are prevalent.Features:Excellent moisture absorptionHigh thermal resistanceOutstanding strength and dimensional stabilityExcellent machinabilityBenefits:Allows for precision machining and complex geometries in test socket applicationsProvides greater strength and dimensional stability compared to unfilled PEEK materialsLow internal stresses and no "soft center" issues associated with injection molded blanksApplications:Test sockets for the semiconductor manufacturing industryPrecision machining and complex geometries in various industries where high thermal resistance and moisture absorption are required.
Mitsubishi Chemical Group Corporation
Duratron® T4203 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Temperature Resistance, Good Impact Strength, Good Abrasion Resistance, Creep Resistant, Low Thermal Expansion, Good Compressive Strength, Wear Resistant, High Strength, High Tolerance, High Loading Absorption Capability, High Elongation, Odorless, Excellent Toughness, Electrically Insulating, Good Machinability, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
4200.0 - 4200.0 MPa
Color:
Brown
Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment
Mitsubishi Chemical Group Corporation
TIVAR® Sterra™ ESD UHMW-PE
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Color:
Black
Physical Form:
Profiles
TIVAR® Sterra™ ESD UHMW-PE are electrostatic dissipative shapes produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as agriculture and grain handling, bulk material handling, and parcel handling. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ ESD UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ ESD UHMW-PE is often a favored solution for conveyor, chute, and hopper applications, where electrical charge build-ups are prevalent. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ 1000 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Color:
Grey
Physical Form:
Rods, Bars, Plates
Ketron® Sterra™ 1000 PEEK is an unfilled, general-purpose grade known for its exceptional elongation and toughness. It is ideal for instrument and seal components, where ductility and inertness are crucial. Ketron® Sterra™ 1000 PEEK portfolio, featuring recycled content for a reduced carbon footprint compared to non-recycled materials.
Mitsubishi Chemical Group Corporation
Techtron® 1000 PPS
Polymer Name:
Polyphenylene Sulfide (PPS)
Physical Form:
Rods, Plates
Features:
Anti-Wear Properties, Low Thermal Expansion, Good Machinability, Dimensional Stability, Corrosion Resistant, Low Moisture Absorption, High Tolerance
Density:
1350.0 - 1350.0 kg/m³
Tensile Modulus:
4000.0 - 4000.0 MPa
Color:
Natural
Techtron® 1000 PPS is a high-performance polymer known for its excellent dimensional stability, chemical resistance, and easy machinability. It is a unfilled grade of Polyphenylene Sulfide (PPS) and is ideal for a wide range of applications where precision and durability are required.Key features:Outstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion make it easy to maintain tight tolerances.Easy machinability: this material can be machined to close tolerances, making it suitable for precise components.Corrosion resistance: due to its chemical resistance, this material is ideal for use in corrosive environments.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals and moistureEnhanced precision and dimensional stabilityImproved machinability and tight tolerance controlApplications:Structural parts in corrosive environments such as chemical processing and oil and gas industry.Precision components and machine parts that require dimensional stability, wear and chemical resistanceElectrical components, as it has good electrical insulation and dielectric properties.Automotive and aerospace components as it can withstand high temperatures.Techtron® 1000 is a versatile and reliable material that can help improve the performance and longevity of your products, it's available in a range of shapes and sizes, making it easy to incorporate into your designs.
Mitsubishi Chemical Group Corporation
TIVAR® Sterra™ DrySlide UHMW-PE
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Additives Included:
Lubricant (Unspecified)
Color:
Black
Physical Form:
Plates
TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ HPV PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Additives Included:
Lubricant (PTFE), Lubricant (Graphite)
Fillers Included:
Carbon Fiber
Color:
Black
Physical Form:
Plates
Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ketron® CM CA30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Low Thermal Expansion, Good Heat Dissipation, High Impact Resistance, Good Compressive Strength, Corrosion Resistant, Wear Resistant, High Strength, High Tolerance, Odorless, Chemical Resistant, High Stiffness, Good Thermal Conductivity, Abrasion Resistant
Density:
1420.0 - 1420.0 kg/m³
Tensile Modulus:
9648.8 - 9648.8 MPa
Color:
Black
Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.
Mitsubishi Chemical Group Corporation
Sultron® LSG R5500 PPSU
Polymer Name:
Polyphenylsulfone (PPSU)
Physical Form:
Parts & Shapes
Features:
X-Ray Sterilizable, High Ductility, Biocompatible, Gamma Sterilizable, Hydrolysis Resistant, Life Science Grade, Plasma Gas Sterilizable, Acid Resistant, Alkali Resistant, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Excellent Sterilization Resistance
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
2450.0 - 2450.0 MPa
Color:
Grey, Blue, Off White, Yellow, Green, Orange, Brown, Red, Black
Sultron® LSG R5500 PPSU Black BK937 is designed for healthcare and pharmaceutical applications. It offers numerous features, including high ductility, ethylene oxide sterilizability, biocompatibility, hydrolysis resistance, excellent sterilization resistance, X-ray sterilizability, alkali resistance, life science grade, gamma sterilizability, steam sterilizability, acid resistance, heat sterilizability, and plasma gas sterilizability. It comes in various colors, including gray, black, orange, brown, blue, red, green, yellow, and off-white, and is a product available in the physical form of parts and shapes.
Mitsubishi Chemical Group Corporation
Ketron® LSG FG PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Heat Resistance, Biocompatible, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, Excellent Mechanical Strength, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Chemical Resistant, High Stiffness, X-Ray Sterilizable
Density:
1310.0 - 1310.0 kg/m³
Tensile Modulus:
4300.0 - 4300.0 MPa
Color:
Black, Beige
Ketron® LSG FG PEEK is a product available in the form of plates and rods and boasts a range of features including X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance, ethylene oxide sterilizability, and biocompatibility. It is offered in both beige and black colors and is suitable for applications in equipment and parts, particularly connectors.
Mitsubishi Chemical Group Corporation
Ketron® LSG CA30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Creep Resistant, Heat Resistance, Biocompatible, Gamma Sterilizable, Wear Resistant, Life Science Grade, Plasma Gas Sterilizable, Excellent Mechanical Strength, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Dimensional Stability, Chemical Resistant, High Stiffness, X-Ray Sterilizable
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
9200.0 - 9200.0 MPa
Color:
Black
Ketron® LSG CA30 PEEK is a product available in the form of plates and rods, and possesses an array of beneficial features including ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, wear resistance, plasma gas sterilizability, dimensional stability, chemical resistance, and creep resistance. It comes in a sleek black color and is well-suited for applications in appliances and electronics. Potential uses include nailing target devices, grips, adapters, and washers.
Mitsubishi Chemical Group Corporation
Duratron® T4301 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
Creep Resistant, Lubricated, Low Thermal Expansion, Low Coefficient of Friction, Wear Resistant, Improved Stick-Slip Response, High Tolerance, Odorless, Dimensional Stability, High Flexural Modulus
Density:
1450.0 - 1450.0 kg/m³
Tensile Modulus:
5500.0 - 5500.0 MPa
Color:
Black
Duratron® T4301 PAI Polyamide-imide is a high-performance plastic that offers exceptional properties for severe service wear applications. The addition of PTFE and graphite provides this grade with improved wear resistance and dimensional stability, making it an ideal solution for non-lubricated bearings, seals, bearing cages, and reciprocating compressor parts.Features:Very low expansion rate and coefficient of frictionLittle to no slip-stick in useExcellent dimensional stability over a wide temperature rangeHigh flexural modulus of 1,000,000 psiHigher wear resistance compared to unfilled Duratron® T4203 PAI gradeBenefits:Allows for increased bearing speeds and extended part lifeCan be used in severe service wear applicationsIdeal for non-lubricated bearings, seals, bearing cages, and reciprocating compressor partsApplications:Bearings and bearing cagesSealsReciprocating compressor partsOther severe service wear applicationsCompression-molded Duratron T4501 PAI is similar in composition to Duratron T4301 PAI, and is selected when larger shapes are required. Prior materials for these applications include steel cages, hardened steel balls, and bronze bushings. Duratron T4301 PAI (colour: black) also offers excellent dimensional stability over a wide temperature range.
Mitsubishi Chemical Group Corporation
Ertacetal® H POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Plates, Rods
Features:
High Hardness, Creep Resistant, Excellent Stiffness, Low Thermal Expansion, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Improved Wear, Good Machinability
Density:
1430.0 - 1430.0 kg/m³
Tensile Modulus:
3700.0 - 3700.0 MPa
Ertacetal® H / Acetron® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, hardness, and creep resistance, making it the perfect choice for a wide range of demanding applications.Features:Superior mechanical properties that allow the use of standard fastenersExcellent stability and machining properties that reduce machining costsDurable material that allows for easy installation and removal with minimal distortionHigh chemical resistance for a long service lifetimeHigh impact strength, even at low temperaturesExcellent dimensional stability with low water absorptionBenefits:Reduced machining costs and improved efficiency in manufacturingLong-lasting and durable components that can withstand demanding conditionsEasy installation and removal, even in tight spacesHigh chemical resistance ensures a long service lifetimeHigh impact strength, even at low temperatures, ensures reliable performance in any environmentExcellent dimensional stability ensures consistent and accurate resultsApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components
Mitsubishi Chemical Group Corporation
Kyron® GC100
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates
Features:
High Tolerance, Good Machinability, High Stiffness, Good Stability, Low Moisture Absorption
Tensile Modulus:
7579.0 - 7579.0 MPa
Kyron® GC100 Polyetheretherketone PEEK - Superior Dimensional Stability and Micro-Machinability for Semiconductor and Electronics ApplicationsFeatures:Unfilled injection molded shapesSuperior dimensional stability and stiffnessExcellent micro-machinability capabilities due to low CTE and tensile elongationBenefits:Specifically formulated for the semiconductor and electronics industryIdeal solution for burn in and test socket applications where precision machining is requiredApplications:Burn in and test socket applications in the semiconductor and electronics industryAny application requiring precision machining and excellent dimensional stability and stiffness.
Mitsubishi Chemical Group Corporation
Nylatron® GSM Blue PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Lubricated, Good Mechanical Properties, Low Coefficient of Friction, High Strength, Improved Wear, Excellent Toughness, Good Electrical Properties, High Pressure Applications
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Color:
Blue
Nylatron® GSM Blue PA6 is a unique and advanced bearing grade that offers exceptional frictional characteristics, low coefficient of friction, and a low "k" factor. This makes it an ideal solution for high pressure and low speed applications, such as slide pads, thrust washers, and trunnion bearings. Additionally, it is also an excellent choice for bearing and wear parts in a wide range of automated equipment applications.Features:Superior frictional characteristicsLow coefficient of frictionGreater limiting PVLow "k" factorBroadest size range availabilityDark blue in colorBenefits:Ideal for high pressure and low speed applicationsExcellent wear resistanceGood mechanical and electrical propertiesIdeal balance of strength and toughnessLow coefficient of frictionApplications:Slide padsThrust washersTrunnion bearingsBearing and wear parts in automated equipment applications.
Show
36
of 1,837 results
Go to page
1
2
3
4
5
6
7
8
9
10