Products results

Polycor® 944 Neutral Base isophthalic gel coats are high quality coatings developed for the fiberglass industry. These gel coats provide quality finishes, which deliver good chemical/water resistance, gloss retention, weatherability, and resiliency. These gel coats are formulated to meet the rigid requirements of transportation, boating, and sanitary applications. They have enabled customers to meet and surpass all requirements of the American national standard for plastic bath tubs, shower receptors and shower stalls, ANSI Z124.1, .2 -1995, sec. 6.1.1. 944 gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Polycor® 944 isophthalic gel coats are available in a wide range of eye-appealing colors. Customer color matching is available on request. See polynt’s 944-W-005 data sheet for standard White isophthalic gel coat.

Ares P200 NGSL isophthalic resin of medium reactivity. Excellent resistance to chemical agents. Excellent color stability, UV stabilized. Good compatibility with fillers and pigments.

P & P Technology AS-SCS001 CONDUCTIVE SILICONE CAULK is an electrically conductive composite material comprising of silicone elastomer and silver plated copper particles. It is designed to be easily applied to panel joints &seams and/or the small clearances that result from non-continuous mechanical fixing in sheet metal enclosures. On application it cures at room temperature to form a highly conductive elastomeric section / joint that has good adhesion to most commonly used metals &substrates. When fully cured it will prevent water ingress and improve the EMI shielding performance of panel joints &overlaps.

RESOLCOAT 7050 is a Abrasion resistant epoxy gelcoat. which has excellent abrasion resistance and has good fire resistance. This new generation system has a viscosity and a thixotropy suitable for brush application on heated tools

Schmelzer Industries PEARLVEIL 3 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

Schmelzer Industries PEARLVEIL 15 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

VTFA400 (DF034) toughened epoxy adhesive film is design to cure between 65°C and 120°C, allowing flexibility in component manufacture.

Lavecoat IO is based on IsoPhtalic resin, provide very protection and good mechanical performance in external applications with exposure to water and sunlight.

Sogel Aquaguard Gel coats are developed from a proprietary ISO/NPG resin with high quality pigments and special additives. These gel coats provide excellent resistance to chlorine, blush/blister resistance, weathering resistance, and gloss retention. They have very good flexibility and crack resistance at demold.

Nord Composites GF 921 is a op coat formulated with isophthalic resin, used to make floor coverings with or without the use of corundum as an anti-slip. Thixotropic, pre-accelerated. Gun or robot application. Contains a film-forming agent.

Polycor® Tooling VE SP gel coats are specifically formulated with selected vinyl ester resins that exhibit high heat distortion temperature to withstand the repeated molding of FRP laminates. They provide a high gloss and hard durable surface. These tooling gel coats are ready to be sprayed after the addition of the proper amount of the appropriate of promoters, then the right amount of methyl ethyl ketone peroxide. Read application instructions carefully, because even though manufacturing precautions are used to make tooling gel coat, a misapplication of these products can produce unacceptable results.

Sogel Metallic Gel coats have been developed from a special polyester resin. This, in combination with high quality additives, allow optimal performance for the manufacture of exterior pieces with a metallic effect exposed to weather conditions. These gel coats provide a permanent lustrous finish, an esthetic surface, and an intense color. Excellent UV resistance, and resistance to osmosis make them ideal for applications in the aeronautical industry.

Our Polyester Tooling Gel coat was formulated from a special polyester resin in combination with high quality additives, providing good high deformation temperature. Sogel’s Polyester Tooling Gel coat provides a permanent surface gloss to the mold, allowing the manufacturing of several parts between polish/wax applications.

Gel Coat IN-700 H/S* (Colorless) is a premium quality gelcoat. It is enhanced UV-resistant decorative coating based on ISO/NPG unsaturated polyester resin, for “spray” (GELCOAT IN-700 S) and “hand” application (GELCOAT IN-700 H). The gelcoat could be tinted to any color in accordance with RAL cataloge or with your laminate sample.

Armorguard® 967 White have been formulated as barrier coats to reduce osmotic blistering, and as print blockers, to provide a smoother gel coat finish.

Lavecoat FT Represents an evolution in the flame retardant gelcoat range since thanks to its intumescent properties it provides high fire protection combined with a very low smoke emission. In combination with Lerpol RS61, it enables the manufacturing of parts rated class HL3 in R1 and R7 according to EN 45545 norms.

AeroWindTech AWTNPP 204 is designed for vacuum bag lay-up composites, metal-to-metal bonding structures, and resin infusion layup processes. It is a white nylon with red tracers to prevent material being left behind. This Heat Set and scoured finish material is a 100% Nylon 6, 6 fiber and melts at approximately 419° F (212° C). This product is not recommended for phenolic systems. The fabric leaves a rough surface impression for priming and secondary bonding and is available in precision slit widths.

EPOVIA ORTHO SP - Orthophthalic,good workability,available in a range of white and or color. Main Applications areas are Agrochemical,Agrobusiness,Solvents etc.

SURFITEX™ EU 45 G NL is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.

Armorguard® 967 Black have been formulated as barrier coats to reduce osmotic blistering, and as print blockers, to provide a smoother gel coat finish.

RESOLTECH 2010 FR is a Epoxy auto extinguishing topcoat. Which complies with IMO Solas Part 5 Annex 1 For bulkheads, walls & ceilings linings, floor covering, and primary deck covering. Has applications (Gelcoat, topcoat or casting).

Polynt Group 54X series gelcoat are formulated with a particular mix of polyester resins, for use in applications where sun exposure and weather conditions are a factor. They are suitable for boats, truck cabs, water slides and environments with humidity and direct sun exposure. This unique formulation is easier and quicker gloss recovery with less buffing time to achieve gloss.

RECKLI Adhesive Paste EP is a slightly thixotropic, solvent-free, two-component adhesive resin for the adhesion of wood, paperboard, natural or synthetic stone, various metals and plastics. Its color is creamy-white.

POLYCOR® LSC NPG FLEX PA WHITE 9199 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

Sogel Platinum Gel coats have been developed from a proprietary hybrid resin with high quality pigments and special additives. These gel coats offer outstanding paint-like weathering resistance, optimum crack resistance at demold and have blister and chlorine resistance superior to that of ISO/NPG gel coats. Platinum Gel coats require the use of a two component spray gun application system for the simultaneous application of the co-promoter RM-0018 Sogel.

Polycor® 969 Colors - sanding, MACT compliant gel coat for use in manufacture of FRP parts to be painted. Excellent sanding properties and good elongation. Can be used for room temperature and heated molding applications. Main applications areas are aeronautical, railway sector, textile industry etc.

Gel Coat IN-500 (Clear) is a premium quality gelcoat. It is a decorative coating based on ISO/NPG unsaturated polyester resin, for “spray” and “hand” application. The gelcoat could be tinted to any color in accordance with RAL cataloge or with your laminate sample.

Imedge® ECT120 Colors - epoxy compatible technology; MACT compliant gel coat for in-mold use with epoxy resin matrix laminates; deep, dark, rich Colors and high gloss parts; excellent color and gloss recovery after sanding and buffing; excellent scratch and wear resistance; resistance to porosity. Main applications areas are aeolian, textile industry etc.

Polynt Group Polygel 31 - orthophthalic gel coat; used in manufacture of FRP parts to be painted; excellent sanding properties and good elongation. Main applications areas are composites, industrial sector, mass transports etc.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

Schmelzer Industries PEARLVEIL 20 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

Polynt Group 22, 22-01 - superior waterimpact resistance and weathering properties; resistance to staining, chalking, crazing and cracking; high gloss retention; easy sprayability. It is generally used in composites applicatons.

AeroWindTech AWTPP 103 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. AWTPP-103 is produced from 100% Polyester fiber. The fiber melts at approximately 480°F (249°C). The fabric leaves a medium surface impression for priming and secondary bonding and is available in precision slit widths. This product is available in standard white heat set finish.

POLYCOR® TOP COAT PA WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Sogel Ortho Balcon Gel coats are developed from an ortho resin with high quality pigments and special to provide good weathering resistance. These gel coats have been formulated to be easily sprayable and have good application properties.

Polycor® Tooling VE BR Neutral 0000 - speciality vinyl ester based gel coat formulated to provide our highest level of heat resistance. A high gloss durable surface, resilient to the repeated molding cycles of composite production. High levels of styrene and chemical resistance.