Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- RESOLTECH 2010 FR/2014 FR is a fire retardent epoxy system that complies with EN 45545-2 standard, it can be used as a gelcoat, a topcoat or as a casting resin.
- One coat of 300 to 500 um applied by brush or roller is recomended in order to obtain the self-extinguishing properties.
- After a proper surface preparation, RESOLTECH 2010 FR/2014 FR system may be applied on on many susbtrates (steel, aluminum or composite)
Applications & Uses
- Markets
- Composites End Use
- Applications
- It is recommended to use the products at temperatures above 10°C in order to facilitate the mixing of the two parts.
- Application by brush, roller or casting.
- Coverage recommended: 300 to 500um
- Consumption: 450 to 750 g/m
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (23°C) | 1.58 | — | — |
| Gel time (70 mL, 4cm at 23°C) | 2h42min | — | — |
| Hardness | 89.0 | — | Shore D |
| Viscosity (23°C) | 81 500 | mPa.s | — |
Safety & Health
- Health & Safety
Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of re- sin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15 minutes, hol- ding the eyelid open, and seek medical attention. Ensure adequate ventilation in work areas. Respirato- ry protection should be worn with ABEKP coded filters. Resoltech issues full Material Safety Data Sheet for all hazardous products. Please ensure that you have the correct MSDS to hand for the ma- terials you are using before commencing work.
Packaging & Availability
- Packaging Type
- Packaging
2010 FR ECO+2014 FR
- Box of IKg +0.11Kg
- Bucket of 5Kg + 0.55Kg
- Bucket of 25Kg + 2.75Kg
- Drums kit of 200Kg+ 22Kg
Storage & Handling
- Storage
Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original pac kaging (check expiry doate on the label)