Products results

ULTRA-PEP™ 90 is a multi functional processing additive. ULTRA-PEP™ 90 works as a mild mastication agent in the early stage of NR compounding and subsequently aids filler dispersion and down line processing, like extrusion and mold flow. Since the mastication effect is slower than with common peptizing agents, fewer break downs of polymer chains can be observed, resulting in better physical and dynamic properties. ULTRA-PEP™ 90 can be added in the masterbatch compound with other compounding ingredients and therefore a pre-mastication step is not needed. As such, additional cost saving could be achieved.

Methenadur® are White crystals or powder in appearance.

Antioxidant compound can effectively prevent the thermal oxidation of polymer processing, and long-lasting protective effect of the polymer from the widely use of polyethylene, polypropylene, polyester, polyurethane, polystyrene, ABS resin, polyamide, synthetic rubber and other polymer materials.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

PEROXAN AHP is tert-Amyl hydroperoxide 80%, Solution in water.PEROXAN AHP is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/ butadiene/styrene (ABS rubber).

MoldWiz® EM-606SFL - A water-based external release agent with anti-rusting properties that dries at room temperature forming a monomolecular film which adheres by absorption to the mold walls and has no affinity for the resin or rubber. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

Puyang Changyu Petroleum Resins CBS(CZ) Powder is a highly reactive species aftereffect accelerators, anti-scorch performance, process safety, curing time is short. When a strong role in promoting the curing temperature above 138 ℃. Changing and CY TMTD, CY DPG or other alkaline accelerators cooperation with the second accelerator. Alkaline accelerators such as thiuram and dithiocarbamate salts to enhance its activity. CBS and CTP and use alternative NOBS, nitrosamines problems can be avoided by people concerned but also meet the same scorch safety performance and faster cure rate needs. Mainly used in the manufacture of tires, hoses, rubber, industrial rubber cables, etc. products.

IRRH Speciality Chemicals Zinc Stearate ISC-500 is biodegradable and non-toxic.

CFI Carbon Products Austin Black 325 is produced from high quality, low volatile, sustainable bituminous coal, Austin Black 325 is a dry, finely divided powder with low specific gravity. It is known for its consistent, versatile, and formula-improving attributes, it can reduce end-product weight and increase your profit margin. Compared to other clay, talc, and calcium carbonate fillers, Austin Black 325 is one of the most cost effective and versatile organic fillers available.

Emulblack 1608 is a black masterbatch based on cold polymerized emulsion SBR, aromatic oil and carbon black.- SBR 100 pts - HAO 12.5 pts - Carbon Black N220 52 pts

N234 is a rubber carbon black.

4020(6PPD) is Rubber Antioxidant. Pure 6PPD is white solid product, and will gradually oxidize to brown solid when exposed to the air. Industrial product 6PPD is purple brown to black brown granules or flakes, and will slowly cake when the temperature exceeds 35-40°C. It is soluble in gasoline, benzene, acetone, ethyl acetate,dichloroethane, carbon tetrachloride ,methylbenzene, ethyl alcohol and other organic solvents, insoluble in water.

Orient Black® N121 is a Super Abrasion Furnace (SAF) grade with high structure and high surface area offers high reinforcement in rubber products.

Microsphere® FN-100S is chlorinated free grade and is medium temperature expansive product.

Nurcacit MBS GRS provides extended scorch safety and good green stock storage stability compared to CBS or TBBS. It is recommended for applications where extended scorch safety is required such as thick extrusions. Stock with high loading of furnace blacks such as ISAF and SAF. Its long scorch delay is also advantageous in injection or transfer molding operations.

Taizhou Huangyan Donghai Chemical Antioxidant agent 4010NA (IPPD) is a high-efficiency and multi-functional antioxidant with a wide range of applications. It can be used in natural rubber and various synthetic rubbers and their latex. It can be used in aircraft and automobile tires, bicycle tires, and cable industrial rubber products and latex. It is soluble in organic solvents such as oil and alcohol. It is hard to dissolve in gasoline, insoluble in water. It is easy to oxidize and change color when exposed to air and sunlight, but does not affect its performance.

China Star Materials Antioxidant ODA is mainly used to produce tires, tube tires, cables, rubber overshoes, rubber mats, thermal aureoles and sponge products, etc. When ODA is used in CR with Antioxidant ODA as co-reagent, it will perform its best thermal resistance, reduce the plasticity of unvulcanized CR, and decrease the degree of shrinkage during calendering, so is helpful to adjust the size of semi finished articles, and increase the stability of CR during transportation and storage.

SBR 1778 is a general-purpose cold polymerized, naphthenic oil-extended elastomer. It exhibits excellent UV light stability for a SBR polymer.

Chemical name of Sirantox® 77PD (4030) is N'-pair(1,4-Dimethylpentyl)right Phenylenediamine.

Ve Chemical N539 plays a crucial role in the rubber industry. They are widely used in tires and rubber products.When used in tires it ensures a high resistance to abrasion, good road handling and aging resistance.Carbon Black is also an important ingredient in the production of a multitude of other rubber goods like profiles, hoses and anti-vibration systems.

IRRH Speciality Chemicals Zinc Stearate ISC-400 is biodegradable and non-toxic.

JSC Sterlitamak Petrochemical Plant SKS-30 ARK / SBR-1500 is a styrene and butadiene copolymer obtained by emulsification method with the use of mixture of rosin and fatty acids soaps. It is stabilized by non-staining antioxidant.

Finornic Chemicals Finor-MBI-010 is a non staining synergistic antioxidant for natural and synthetic rubbers offering good heat resistance and flex protection in natural and synthetic rubbers as well as latex. Not recommended for Polychloroprene. Easily disperses in rubber.

An Ultra Fast Curing Polymer for Sponge and Dense Extrusions

ULTRA-PEP™ 96 is a combined peptizing and processing additive for natural rubber. ULTRA-PEP™ 96 is easily dispersed in rubber due to its content of dispersing agent present. ULTRA-PEP™ 96 is extremely active and therefore can be used at low dosage levels. Its peptizing action starts at 90 °C but reaches an optimum at 140°C.

Sircon TR (30T), since the material is silicone rubber, it shows stable characteristics even when used for a long time.

Qingdao Zhongsu PE Wax H-20 is a polymerized type.

Nanjing Shuguang Chemical Group Accelerant SG-R 704 is used as the super accelerator for natural rubber, synthetic rubber and latex. It can replace ZDBC, ZDEC, PZ due to its lower vulcanization temperature in application. And the processing has better safety. The prominent advantage is that it does not produce the carcinogenic nitroamine in the rubber processing. It can also be a good activator for thiazole accelerator. When this product is added in, the dosage of zinc oxide and sulfur is ordinary, the fatty acid may be needed or not. SG-R 704 may be added to the rubber material directly, or added into latex with dispersing medium. Please refer to the regulation in the related chapters in FDA, BgVV when it is applied to the rubber product which food contact.

Sirubtis™ IS 7020 is 20%Oil-filled insoluble sulfur.

Haftolat or the dry form, Haftolat/P, are very effective process aids produced from EPM rubber. I

PEROXAN BIB-40 PK is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Powder with clay.PEROXAN BIB-40 PK is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

ChemPlasa Materials L-1020 is Polarity Amide Wax which used as a functional additive in many industrial applications.

Emulprene 260 is a self-reinforcing emulsion rubber due to its high styrene content. The design of the elastomer allows for excellent processability during mixing and the special antioxidant used in its manufacture make it non-staining.

KRAIBURG SBR is a styrene-butadiene rubber used in applications such as tire industry also for shoe soles, cable sleeves, seals, hoses, roller coatings, conveyor belts, floor coverings.

Microsphere® F-50 is chlorinated free grade and is low temperature expansive product.

CBS (CZ) Particle is Secondary Sulfonamide. It is grayish white or yellowish powder with slightly odor and nonpoisonous. It is soluble in benzene, methylbenzene, chloroform, carbon disulfide, carbon tetrachloride, methylene chloride, acetone and ethyl acetate; not easily soluble in ethyl alcohol; insoluble in water,dilute acid, dilute alkali and gasoline.