Products results

CAS-20® 4 Anhydrous Calcium Sulfate Filler is manufactured from high purity gypsum rock using controlled calcination and fine grinding; the calcination process used greatly reduces its moisture affinity. USG CAS-20-4 Anhydrous Calcium Sulfate Filler can be used at high loadings and consistently provides an excellent balance of properties and good surface appearance. It is ideal for food packaging applications that require a filler with high purity and food acid resistance. USG CAS-20-4 Anhydrous Calcium Sulfate Filler can also be used as a partial replacement for titanium dioxide (TiO2) because of its high brightness and opacity. The narrow particle size distribution contributes to optimum impact properties in thermoplastics; USG CAS-20-4 Anhydrous Calcium Sulfate Filler finds success in a variety of thermoplastic, thermoset and plastisol systems. In addition, the low Mohs hardness minimizes abrasion to processing equipment. USG CAS-20-4 Anhydrous Calcium Sulfate Filler is available in 50 lb. bags or 2,000 lb. semibulk.

European Plastic Joint Stock Company PP Filler Masterbatch is compounded of Calcium Carbonate CaCO3, Polypropylene PP as the carrier and other special additives by twin-screw machines.

Yamaguchi Mica AB-25S is a series of high performance mica powder that realizes smooth and thin scale-like particles with high aspect ratio using agrinding machine uniquely developed by Yamaguchi Mica Co.,Ltd. It produces effects that the any other makers have nevereffectuated. Pure Indian muscovite which contains much more fully-grown crystals is used as the material and is processed with our high-level refinement and iron removal methods that guarantee the quality of our products.

USG Corporation TERRA ALBA NO. 1, Calcium Sulfate Dihydrate Filler is a flame-retarding filler. It offers low abrasion to processing equipment and is available in 50 lb. bags or 2,000 semi-bulk from USG’s Southard, Oklahoma plant. USG Terra Alba No. 1 Calcium Sulfate Dihydrate Filler is made by fine grinding and air separating a select, high purity white gypsum containing approximately 20% water of crystallization. Depending upon vapor pressure, relative humidity, loading levels, etc., this water of crystallization, or combined water as it is often called, starts being released as the USG Terra Alba No. 1 Calcium Sulfate Dihydrate Filler is heated above 50 °C. At approximately 180 °C, 75% of the combined water has been released. Water is not totally removed until temperatures exceed 400 °C.

Ishihara Sangyo Kaisha Ltd. Needle-shaped titanium oxide FTL- 300 is used in reinforcing materials for plastics, ceramics, metals, etc. It is also used in paints, paper, rubber and catalysts, friction materials, filter materials.

Shijiazhuang Saiya Chemical Carbon Black - N220 it appears in pure black fine grain or powder which can burn in air. Widely used in textile, printing and dyeing, ceramic, paper, synthetic detergent, pesticide, metallurgy, food, rubber, etc.

MICROCARB NF11 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Ve Chemical N330 plays a crucial role in the rubber industry. They are widely used in tires and rubber products.When used in tires it ensures a high resistance to abrasion, good road handling and aging resistance.Carbon Black is also an important ingredient in the production of a multitude of other rubber goods like profiles, hoses and anti-vibration systems.

Orient Black® N351 is a medium surface area and high structure HAF grade, provides high wear resistance and excellent processing characteristics.

Orient Black® N326 is low structure carbon black of N300 series grade and is characteristics with medium surface area offers high elongation, flexibility and tear strength in rubber application.

Seast 116HM is a variety of carbon black that is added to rubber to make it stronger and more res istant to wear. It is used in the rubber parts of industrial machines and various sizes and models of tire.

E-SPHERES® ES75 are Finest Grade Standard Hollow Ceramic Microspheres.

Dongguan Liangsu Masterbatch Technology C5031 is made of high quality Calcium Carbonate and other special additives after extrusion molding from high performance twin-screw machine. It is widely used for polyolefin material in the process of extrusion, injection, plastic blowing, film blowing, casting, etc. When it is put into use, we can reduce material cost, and improve the character of final products.

European Plastic Joint Stock Company HD Filler Masterbatch is made from CaCO3, PE carrier, and other additives. Exploiting from the hundreds of year old high-calcium limestones in Vietnam with ample resources, we produce the strong HD thermoplastic with the strong but remain light weight properties and cost effective solution for producing finish plastic products.

TOROWHITE (Toro Gips) Ti-ExR 04 is a Calcium Sulfate Anhydrite (AII) pigment with very high purity & excellent whiteness which can be used to extend TiO2 to a certain percentage.

Karntner Montanindustrie Wollastonite LAR 230# is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

Mansil 130 is a low surface area, ultra white spray dried powder or granules having excellent dispersion properties, resulting in desired reinforcement in rubber compound

Microsphere® FN-100M is chlorinated free grade and is high temperature expansive product.

Dongguan Liangsu Masterbatch Technology C5032 is made of high quality Calcium Carbonate and other special additives after extrusion molding from high performance twin-screw machine. It is widely used for polyolefin material in the process of extrusion, injection, plastic blowing, film blowing, casting, etc. When it is put into use, we can reduce material cost, and improve the character of final products.

Shijiazhuang Saiya Chemical Carbon Black - N330 it appears in pure black fine grain or powder which can burn in air. Widely used in textile, printing and dyeing, ceramic, paper, synthetic detergent, pesticide, metallurgy, food, rubber, etc.

MICROCARB NF19 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Seast 6 is a variety of carbon black that is added to rubber to make it stronger and more res istant to wear. It is used in the rubber parts of industrial machines and various sizes and models of tire.

Precipitated silica, a form of synthetic amorphous silicon dioxide, is derived from quartz sand, a crystalline form of silicon dioxide. The physical properties of precipitated silica can be manipulated during the manufacturing process to deliver products with a wide range of performance-enhancing features engineered for many different end-use applications.

Caco3 Filler 801 is a high quality calcium carbonate loading.

Dongguan Liangsu Masterbatch Technology C5036 is made of high quality Calcium Carbonate and other special additives after extrusion molding from high performance twin-screw machine. It is widely used for polyolefin material in the process of extrusion, injection, plastic blowing, film blowing, casting, etc. When it is put into use, we can reduce material cost, and improve the character of final products.

MICROCARB NF3 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

2B-KALK3 is composed of 3 micron Micronized Calcined Kaolin .

2B-ATAB45FP is composed of Micronized Tabular Alumina, Diallyluminium trioxide, Al2O3 .

Microsphere® F-48 is chlorinated free grade and is low temperature expansive product.

Karntner Montanindustrie Micro 12H is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

Ve Chemical N660 plays a crucial role in the rubber industry. They are widely used in tires and rubber products.When used in tires it ensures a high resistance to abrasion, good road handling and aging resistance.Carbon Black is also an important ingredient in the production of a multitude of other rubber goods like profiles, hoses and anti-vibration systems.

Beaverloc® 108 is a treated adhesive activated polyester for adhesion to various rubbers, particularly to EPDM, CPE & CSM.

Seast 7HM is a variety of carbon black that is added to rubber to make it stronger and more res istant to wear. It is used in the rubber parts of industrial machines and various sizes and models of tire.

CarbonX® X-7 is delivered in pelletized powder form in 20kg PP bags. For bulk orders, CarbonX® can be delivered in 1000 kg FIBCs and also available in masterbatch form for thermoplastics and elastomers. Masterbatches have been optimally mixed to ensure the highest quality possible in the final product while cutting down on lead times for R&D and Production.

Ishihara Sangyo Kaisha Ltd. Needle-shaped titanium oxide FTL-100 is used in reinforcing materials for plastics, ceramics, metals, etc. It is also used in paints, paper, rubber and catalysts, friction materials, filter materials.

Yamaguchi Mica SJ-005 is a fine-ground mica powder that has been finished by a wet-grinding machine and then re-ground by a dry jet mill.Thinning and impurity reduction compared to those produced by dry grinding. It is used as a high-performance, high-qualityparticulate mica powder, especially for plastics and paints that require a good appearance.