Products results

T103 is a Polypropylene Homopolymer, produced by the Spheripol Technology. T103 combines exceptional processability with excellent Stiffness, Clarity & Gloss T103 is recommended for Thermoforming of Cups, Containers & other miscellaneous disposable items

SiliXan® M 400 is methacrylate modified polymer based on SiO2 /TiO2 is used as unsaturated binder for the formulation of scratch resistant UV coatings. Additive for commercial acrylate- or methacrylate based coating formulations, inks or binder. This binder is preferably used for UV-curing formulation, but also use for peroxidic thermal curing is possible. UV-Protection-Additive.

Ultramarine 462 is a moderate tinting strength, very red shade Ultramarine blue. It is heat fast, lightfast, very easy to disperse and approved worldwide for use in sensitive applications such as food contact plastics and cosmetics.While not as strong or bright as other grades in the R.S. Pigments range, Ultramarine 462 can offer a cost effective solution where only limited technical properties are required.Ultramarine 462 is intended as a general purpose pigment with applications in paint, ink, soap, cosmetics and many other industries. Ultramarine 462 can be used in plastics.

Oleamide wax

Dynax DX4000 is a highly effective and efficient product, especially designed to provide rapid spreading, wetting and leveling performance to various water-based coating systems, such as paints, inks, floor polishes, etc., on low surface tension substrates that are difficult to wet out. DX4000 provides both superior dynamic and equilibrium surface tensions compared to conventional surfactants including fluorochemical and silicone surfactants: it quickly lowers the surface tension of aqueous solutions down to 16 dynes/cm at a very low concentration. DX4000 can be used without a defoaming agent because of its low foaming tendency

LESTAC P140 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

UV N H-ECO Yellow does not require short-wave UV radiation for through hardening. It is of advantage that there is no heat development on the lamp. Thus, the stack temperature is similar to that of conventional inks. It can be cured with most novel Low Energy UV lamp systems.

Colourex Black Acid Dyes are highly acclaimed by the national and international clients, owing to their premium quality and distinctive features.

Organo Zn 10 is a low viscosity yellow colored clear solution of zinc metal-carboxylate in mineral spirits or methyl esters.

ULTRA-PLAST™ TPO6 is predominantly used as a slip agent in PE-films. This is due to migration and formation of a microscopic coating on the film surface. It migrates slower than ULTRA-PLAST™ TP05 but has a better heat stability. ULTRA-PLAST™ TP06 improves mold release and surface finish. It also functions as a dispersant in concentrates which leads to easier let-down of the concentrates. ULTRA-PLAST™ TP06 is sanctioned for use by the FDA (Food and Drug Administration) in a number of applications listed in the sections of Title 21 of the Code of Federal Regulations.

Hangzhou Dimachema PEARL 120 is a Pearlescent pigment.

Dalian Trico Chemical Antifoaming agent for gas production dimethyl silicone oil emulsion is a modified polydimethylsiloxane high-efficiency defoamer emulsion, used to eliminate foam in aqueous systems, with good solubility, fast spreading, strong defoaming and foam suppression capabilities, and a wide range of applications , It is easy to use on site, and it is non-toxic, non-corrosive, and has no adverse side effects.

ACCR 108 is a fine white powder. It is processed from white marble.

SILLIKOLLOID P 87 puriss is a finest particle size distribution with good color neutrality.

Gchemical Company GPRC-2720 is an antifoam defoamers used in caustic towers, glycol. It acts as a blend for poly-glycols and esters.

HisarCal® St-99 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Gold-Tone® Inks Original is the ink that put Buzz Sales Company in the forefront of engraved metallics more than 50 years ago. It requires a porous surface to adhere, but delivers a strong, resilient impression that burnishes well.

Mississippi Lime Company Magnum Fill HO97 is an extender pigment for coatings where it provides excellent hide, good blue-white shade and a high Hegman grind, and as an outstanding filler pigment for paper applications where it provides good opacity as well as excellent retention and drainage properties. All Magnum Fill® powder products are versatile pigments for TiO2 extension in both paper filling and coating applications. Magnum Fill® products are available with higher oil adsorption for increased opacity and wet hide.

THYON SR630 is a high molecular weight alkali soluble solid resin designed to producegood rheology organic and inorganic pigments dispersions.

MAL Magyar Aluminum GROUND HYDRATES ALOLT 21AF for Ground and finely precipitated hydrates are mainly used as environmentally friendly flame retardant filler materials in the production of: cable insulation; thermoplastics; cross-linked elastomers; polyurethanes; PVC; water-based dispersions; polyester resins; papers; epoxy resins; paints. All these grades are white (whiteness > 90 %).

Aluminium paste

SCG Chemicals LP1100P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP11IOOP is guaranteed its high quality for various applications.

Prizmalite P2015SL is a solid soda lime glass microspheres with an average diameter of 8 to 12 microns.

Chemguard S-764P-14A High Performance Anionic Fluorosurfactant is a short-chain, phosphate ester type fluorosurfactant. It is water-based and free from volatile organic compounds (VOC). It provides surface tensions as low as 18 dyn/cm in water at very low concentrations. Chemguard S-764P-14A imparts excellent wetting, spreading, leveling, anti-blocking, and flow control properties on various types of water-based coatings for architectural paints and stains, concrete coatings, industrial coatings, and hydrocarbon surfactant solutions. Chemguard S-764P-14A has excellent dynamic surface tension properties which allow for the rapid attainment of low equilibrium surface tensions. It is low foaming and can provide improved dirt pick-up resistance to exterior paints and interior low-gloss paints, sealers, and stains.

Zinc Stannate(ZS) is a white powder, insoluble in water, it is non‐toxic fire retardant and low heating rate of flame retardants, flame retardant and inhibit the double effect of the smoke. Suitable for use within the operating temperature below 570 °C material.

AteCe Graphic Products B.V. WB3250 is a double side, short and extended delivery waterbased coating with satin.

Vibfast Yellow 4009 is a Organic Pigment.

Non polar Polypropylene wax

Nayakem Di Octyl Sebacate (DOS) is the typical high quality cold resistance PVC plasticizers with high plasticizing efficiency and low color distortion. DOS has favorable lubricating action when processing and is often added with phthalate to make cold resisting agricultural film, cable clad, artificial leather, outdoor water tube, and frozen food packaging film and so on. It can also be used in many synthetics rubber where low temperature performance is required and cold resisting plasticizer for Nitro Cellulose, Ethyl Cellulose, Polystyrene, Vinyl Chloride Copolymer and so on.

Pigment Yellow 151 is recommended for Paints, Plastic, Printing Ink, Limited Usage in Rubber and Textile

LESTAC DCPD100 is pale yellow granular or flake thermoplastic resin obtained from mainly thermo polymerizing unsaturated DCPD derived from the process of thermal cracking of naphtha. The major usages are Adhesive such as pressure-sensitive adhesive, hot-melt adhesive, Coating, Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

Kumho P&B Chemicals KCA 2310 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

ADDAPT_x0001_ PolySurF HPm is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate. It has a higher mono-content compared to PolySurF HP

DISPARLON AQ-320 is a solvent free wetting and dispersing agent based on polymer with phosphoric acid group ester, designed for metallic pigments (i.e. aluminum paste, pearlescent pigments etc.) pre-dispersion in water-borne coating systems.

Sinocmc SINOOF130 is a good finishing agent, thickener and sizing agent. CMC can be applied on the glaze, in the process of weaving the protection of the role, to retain a good elasticity, improve the smooth muscle. CMC as a sizing agent is because of its film forming in the cotton yarn to form protective film, effectively prevent mildew and insect bites. At the same time, CMC can be used as printing material for dyeing industry and it can improve the force of hydrophilic and osmosis of dye material, making the dyeing uniform and less chromatism.