Brands results

St. Louis Group offers a wide range of highly effective liquid & powder phosphorus based flame retardants. Specialty dispersions, blends, and masterbatches are available upon request.

Vanishing Oil is designed for light duty blanking, stamping, very shallow draws and fine forming. The light oily film evaporates in 10 to 20 minutes, depending on the environment, leaving a clean surface with virtually no residue. Vanishing oil is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

1,2-benzisothiazolin-3-one or BIT (CAS: 2634-33-5), the primary active ingredient in Arxada's Proxel® range, is widely recognized as one of the most versatile, compatible and trusted broad spectrum preservative solutions available for the Home Care market. Aside from single-active products based on BIT alone, the Proxel® range also encompasses cost-effective and specialist blends with carefully-identified co-actives providing flexibility of choice for difficult-to-preserve systems. Proxel® GXL and Proxel® AQ have been pre-approved by the EPA for use in Safer Choice labeled products and have been reviewed by NSF International’s Sustainability Program. For consumers the Safer Choice logo provides recognition that the product has been evaluated for its effect on the environment and human health. Utilizing ingredients that are considered the safest in their class. Safety without sacrificing quality or performance.

NITRILATEX is an extensive line of latex with different compositions specifically developed for application in the cord impregnation, rug and carpet backings, and the manufacturing of synthetic and natural fiber agglomerates, supported and unsupported gloves, non-fabric coatings, among others.

Cellular Vulkollan® is characterized by excellent properties such as high resilience, large volume compressibility, high restoring force, good abrasion resistance even under continuous load, aging and weather resistance, resistance to oil, grease, petrol, ozone, nitrogen.

Dynalene develops, manufactures and distributes industrial heat transfer fluids and coolants such as glycols, which include propylene glycol, ethylene glycol, BioGlycol, solar glycol, Geoglycol as well as other fluids including potassium formate, calcium chloride, hydrocarbon and silicone chemistries.

Protal ARO™ is a VOC free, 100% solids liquid epoxy coating formulated to be applied over FBE as an ARO coating (abrasion resistant overlay). It is a 3:1 ratio coating that can be spray or hand applied in the shop or field.

CSR™ is a versatile modified alkali system that can be effectively used in place of sodium hydroxide and potassium hydroxide as a cleaning and neutralization agent. It is unique because it has a freeze point of -40°F (-40°C) and 30 minutes of skin protection on contact.

Ultrachem P-ACO Series is a group of high performance, multifunctional lubricants designed for use in many industrial applications. These are considered environmentally friendly since they are zinc free. These premium petroleum oils are Ultrachem’s answer for petroleum oils where OEM specifications are critical. They are very useful where frequent change outs are necessary due to poor environments prone to contamination from dust, acids, solvents, gasses, or other contaminants. The P-ACO Series has a service life of 2,000 – 4,000 hours under good operating conditions in rotary screw compressors and up to 2,000 hours in reciprocating compressors. The additive chemistry found in this series provides high performance ashless hydraulic fluids and compressor oils with antiwear properties.

BioLoop surfactants have been designed to offer the formulator a wide range of options based on selection of products that range from hydrophobic to more hydrophilic types. These products can be used in many applications and perform against standard synthetic nonionics such as commonly used alcohol ethoxylates. If you want to explore a totally new chemistry, then the BioLoop surfactants are an exciting new range of products.

Ensolite® a closed-cell foam material made from a blend of Poly Vinyl Chloride (PVC) and Nitrile Butadiene Rubber (NBR) It provides a broad range of compression densities. It is for applications in industrial gasketing, flotation insulation and athletic padding. It is a 3.5 to 9.0 pounds per cubic ft. closed-cell PVC (Polyvinyl Chloride) foam. It can be used over a temperature range of -20°F to 250°F.

High quality water based inks for maximum performance.

Acti-Min® is a clean, high quality, white-ring kaolin especially selected for the ceramic and refractories industries.

AT Inks, Robuste™ Grade, a premium line of dye-sublimation inks, are high density, water based inkjet inks designed for a wide range of wide format printers. The inks are designed to be printed on coated transfer paper. The image printed on transfer paper is transferred onto polyester fabrics and onto coated rigid substrates under heat and pressure.