Dynalene

Dynalene HC-50 is a potassium formate/water-based heat transfer fluid engineered to deliver a higher thermal performance than glycol and calcium chloride throughout its temperature range. This user-friendly fluid poses little risk to the environment, equipment or personnel. Five concentrations of Dynalene HC and many specialty mixtures are available to serve a wide range of applications.

Dynalene HC-FG10 is a Potassium Formate/Water solution engineered to perform at low temperatures (-50°C to +218°C). The HC series of fluids have always been non-toxic, non-hazardous, non-flammable heat transfer fluids used in various heat transfer processes around the world, often in food plants. Dynalene HC-FG is engineered to deliver a much higher performance than glycol and calcium chloride throughout its temperature range. This user-friendly fluid poses little risk to the environment, equipment or personnel. Five concentrations of Dynalene HC-FG and many specialty mixtures are available to serve a wide range of applications.

Dynalene HF-LO is a non-toxic, thermally-efficient, odorless aliphatic hydrocarbon heat transfer fluid. Due to the non-aqueous nature of the fluid, it can be used with water-sensitive chemicals to reduce process hazards. Additionally, its high flash point provides improved safety with regards to transportation and electrical hazards.

Dynalene PG-XT is an Inhibited propylene glycol.Propylene glycol (PG), also known as monopropylene glycol or 1,2-propanediol, is a colorless, odorless, slightly viscous fluid that is miscible in water. Dynalene propylene glycol products are comprised of inhibited and uninhibited non-toxic propylene glycol solutions from <10% PG to up to 100% PG. Dynalene also offers raw or inhibited USP (United States Pharmacopeias) food grade propylene glycol (with purity greater than 99.8%) depending on your application.

Dynalene EG-XT is a high-temperature inhibited ethylene glycol. Dynalene ethylene glycol (EG), also known as monoethylene glycol (MEG) or 1,2-ethanediol, is a naturally colorless, odorless, slightly viscous fluid that is miscible in water. Dynalene ethylene glycol products include both inhibited and uninhibited solutions. Dynalene glycols are blended with specially formulated additive packages depending on your system specifications.

Dynalene LC-PG (propylene glycol-based) is specially designed for cooling PEM fuel cells, electronics, computers, and other applications requiring low electrical conductivity coolants. It provides efficient heat transfer that prevents your system from overheating while simultaneously acting as an electrical insulator. LC products use a non-ionic corrosion inhibitor package that prevents corrosion and contaminants from degrading your system.

Dynalene MS-1 is a molten salt heat transfer fluid which can be used in hot bath or solar thermal applications at very high temperatures. MS-1 can safely withstand temperatures up to 565°C (1050°F), higher than most commercially available heat transfer fluids on the market today.

Dynalene 600 high temperature silicone heat transfer fluid is specifically engineered to maintain consistently high thermo-physical stability in the most hostile high temperature applications, such as open fluid baths, quenching tanks and hydraulic/mechanical equipment.It is an environmentally-friendly, silicone-based product with enhanced resistance to oxidation and with a high benchmark for operational safety by exhibiting an open-cup flash point of 315°C (600°F). When premium performance is a minimum requirement, select Dynalene 600 as your fluid of choice.

Dynalene HT is a high temperature heat transfer fluid that embodies all the physical and environmental qualities desired by the modern day customer. It exhibits one of the highest boiling, flash and fire points available at atmospheric pressure. Noncorrosive and highly stable, Dynalene HT is the ideal choice for dependable performance where temperatures exceed the thermal stress limitations of most competitive fluids. The low vapor pressure of Dynalene HT (<0.01 PSIA at 160°C/320°F), along with its low odor and low toxicity, allow for safer use of the product in non-pressurized systems.

Dynalene SF (Single Fluid, High Temperature Heat Transfer Fluid) offers the process industry a versatile, practically nontoxic heat transfer fluid proven to be cost effective and thermally stable at temperatures up to 315°C (600°F). Unlike less-stable mineral oils, Dynalene SF has demonstrated excellent performance over a wide range of temperatures without compromising system reliability or integrity – important factors in choosing a fluid with confidence for long-term use.

Dynalene Inhibited Calcium Chloride heat transfer fluids provide users with a stable, safe, and efficient product for applications where freeze protection, efficiency, and safety are needed. Properly used and maintained, Calcium Chloride solutions and heat transfer fluids provide excellent thermophysical properties.

Dynalene TEG (High-Temperature, Inhibited Triethylene Glycol Heat Transfer Fluid). Dynalene TEG is an inhibited triethylene glycol heat transfer fluid offered in pre-mixed solutions up to 60%. Dynalene TEG offers users a stable, safe, and efficient product for applications where freeze protection is needed. It has a much higher thermal stability than propylene and ethylene glycol and can safely be used up to 204°C (400°F). Properly used and maintained, Dynalene TEG offers excellent thermophysical heat transfer properties all while protecting your system from corrosion and degradation for years.