Agricultural Films


DuPont
Hytrel® 6356
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1220.0 - 1220.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 290.0 - 290.0 MPa
Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.


DuPont
Hytrel® 7246
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding
End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord
Density: 1260.0 - 1260.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 550.0 - 550.0 MPa
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.


DIC Corporation
DIC.PPS® Z-230
Polymer Name: Polyphenylene Sulfide (PPS)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Flame Retardant
Outline: Z-230 is a 30% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black


Greene Tweed
Chemraz™ XRZ
Polymer Name: Perfluoroelastomer (FFKM)
Features: High Purity, Low Compression Set
Chemraz XRZ is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz XRZ include engineering/industrial parts and sealing applications. Primary characteristic: high purity.


DuPont
Hytrel® 5556
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 190.0 - 190.0 MPa
Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.


Prime Polymers
Evolue® SP1520
Polymer Name: Metallocene Linear Low Density Polyethylene (mLLDPE), Linear Low Density Polyethylene (LLDPE)
Processing Methods: Film Extrusion
Melt Flow Index: 2.0 - 2.0 g/10 min
Evolue™ SP1520 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP1520 include film, agricultural and packaging.Characteristics include: Good Sealability Impact Resistant


DuPont
Hytrel® 8238
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1280.0 - 1280.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 1150.0 - 1150.0 MPa
Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.


Mitsui Chemicals
TPX® DX845
Polymer Name: Polymethylpentene (PMP)
Processing Methods: Film Extrusion, Fibers Extrusion, Blow Molding, Profile Extrusion, Injection Molding, Pipe, Profile & Tubing Extrusion
Melt Flow Index: 9.0 - 9.0 g/10 min
TPX™ DX845TPX™ DX845 is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for blow molding, fiber (spinning) extrusion, injection molding, pipe extrusion, or profile extrusion. Primary attribute of TPX™ DX845: High Stiffness.TPX™ DX845TPX™ is a 4-methylpentene-1-based olefin copolymer.TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather.Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material.TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware.


DuPont
Zytel® 70G30HSLR BK099
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 - 9000.0 MPa
Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.


Sasol
SASOLWAX 6530SA
End Uses: Fittings, Wire & Cable Applications, Pipes, Footwear
SASOLWAX 6530SA is a qualified hydrocarbon wax yielding similar torque fusion response as fully refined 165F melt paraffin with benefit of reduced die drool (beard), faster heat transfer, slightly stiffer melt and higher output.


DuPont
Rynite® 935 BK505
Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester
Processing Methods: Injection Molding
Fillers Included: Glass Fiber, Mica
Flexural Modulus: 9300.0 - 9300.0 MPa
Rynite® 935 BK505 is a 35% mica/glass-reinforced modified polyethylene terephthalate resin with low warpage and excellent electrical properties.


Braskem North America
Braskem North America LDF0034
Processing Methods: Film Extrusion, Extrusion
Melt Flow Index: 0.34 - 0.34 g/10 min
LDF0034 is a Low Density Polyethylene of high molecular weight that provides high mechanical strength. It is used in extrusion of tubular films with excellent mechanical properties and heat shrinkage.


VYNOVA
VYNOVA™ S6630
Polymer Name: Polyvinyl Chloride (PVC)
Processing Methods: Extrusion
End Uses: Fittings, Windows & Doors, Fencing & Decking, Pipes, Window & Door Profiles, Construction Applications, Conduit
VYNOVA™ S6630 is a medium molecular weight and medium porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion of PVC articles requiring excellent mechanical properties such as: window profiles, rigid profiles, and pipes.


SACO AEI Polymers
PEXIDAN® L/T-UV
Polymer Name: High Density Polyethylene (HDPE)
Processing Methods: Extrusion
Melt Flow Index: 0.7 - 0.7 g/10 min
PEXIDAN® L/T-UV is a high density PEX system consisting of a silane grafted basecompound A-1001 and a catalyst masterbatch CAT-003 (or A-1022 and CAT-117). When mixed and extruded in the proper proportions, the two-component system results in a material that is crosslinkable by exposure to moisture or by immersion in hot water at 90-95°C. PEXIDAN® L/T is listed by NSF International to standards 14 and 61 and to Canadian Standards Association standard B137.5. NSFI certification to ASTM F876 and ASTM F2023 testifies to its superior resistance to oxidation by hot, chlorinated water. PEXIDAN® L/T is permitted to be used in domestic continuous re-circulation systems and is listed by NSF as a NSF-pw CL5 / PEX 5006 material.


Showa Denko
Bionolle™ 1020 MD
Polymer Name: Polybutylene Succinate (PBS)
Processing Methods: Foam Extrusion, Extrusion
Labeling Claims: Biodegradable, Environmentally Friendly
Density: 1260.0 - 1260.0 kg/m³
Bionolle™ 1020 MD by Showa Denko is comprised of Polybutylene Succinate. It is commonly used It is a Biodegradable


LG Chem
Lucene™ SP 980
Polymer Name: Polyethylene (unspecified)
Applications: Hot & cold drinking water pipe, Floor heating, Radiator connection, Al composite pipe. Description:SP 980, LG PERT is a high performance PE for hot and cold water pipe. It was developed by using a new LG catalyst technology as well as new concept which lead to a BOCD(Broad Orthogonal Co-monomer Distribution) molecular structure. Pipes made out of SP 980 offer excellent properties to both processability and Long Term Hydrostatic Strength. SP980 conforms to the FDA regulation 21 CFR 177.1520. and the NSF/ANSI standard 61(drinking water system components-Health effects).


LG Chem
Lucene™ SP 988
Polymer Name: Polyethylene (unspecified)
Applications: Hot & cold drinking water pipe, Floor heating, Radiator connection, Al composite pipe. Description:SP 988, LG PE-RT Type II is a high performance PE for hot and cold water pipe. It was developed by using a new LG catalyst technology as well as new concept which lead to a BOCD(Broad Orthogonal Co-monomer Distribution) molecular structure. Pipes made out of SP 988 offer excellent properties to both processability and Long Term Hydrostatic Strength. SP988 conforms to the FDA regulation 21 CFR 177.1520. and the NSF/ANSI standard 61(drinking water system components-Health effects).


Prime Polymers
Evolue® SP2320H
Polymer Name: Metallocene Linear Low Density Polyethylene (mLLDPE), Linear Low Density Polyethylene (LLDPE)
Processing Methods: Film Extrusion
Melt Flow Index: 1.9 - 1.9 g/10 min
Evolue™ SP2320H is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP2320H include film, agricultural, coating applications and industrial applications.Characteristics include: Clarity Fast Molding Cycle Good Sealability


VYNOVA
VYNOVA™ S5902
Polymer Name: Polyvinyl Chloride (PVC)
Processing Methods: Injection Molding, Calendering, Extrusion
End Uses: Conduit, Medical/Healthcare Applications, Medical Packaging, Fittings, Pipes, Construction Applications, Tubing, Flooring, Rigid Films, Flexible Packaging
VYNOVA™ S5902 is a low molecular weight, low porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion and calendering of PVC: rigid films for medical, food or consumer goods packaging, compact and foamed sheets, compact and foamed profiles, foam core pipes and fittings, and flooring.


VYNOVA
VYNOVA™ S5730
Polymer Name: Polyvinyl Chloride (PVC)
Processing Methods: Injection Molding, Calendering, Extrusion, Injection Blow Molding
End Uses: Furniture, Pipes, Construction Applications, Flexible Packaging, Medical/Healthcare Applications, Medical Packaging, Credit/Smart Cards, Rigid Films, Laminates, Stationary Supplies, Consumer Applications, Fittings
VYNOVA™ S5730 is low molecular weight, low porosity vinyl chloride homopolymer. It is general purpose resin suitable for extrusion, calendering and injection blow molding of PVC - films for packaging or consumer goods, compact foamed sheets and profiles, foamed core pipes and fittings, and bottles.


Braskem North America
UTEC® 5540
Polymer Name: Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods: Compression Molding, Ram Extrusion, Extrusion
UTEC® 5540 is an Ultra High Molecular Weight Polyethylene with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction what makes it a self-lubricating material.


AOC, LLC
Vipel® F013-AAB-00
Polymer Name: Vinyl Ester Resin
Processing Methods: Pultrusion, Spray Lay-Up, Hand Lay-Up, Filament Winding
AOC's Vipel F013 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F013 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F013 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistantVipel F013 highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment.


Cardia Bioplastics
Cardia Compostable™ B-F
Polymer Name: TPS/Polyester Alloy
Processing Methods: Film Extrusion
Density: 1200.0 - 1200.0 kg/m³
Labeling Claims: Biodegradable
Cardia Compostable™ B-F is a biodegradable and compostable resin based on a blend of thermoplastic starch (TPS), aliphatic polyesters and natural plasticizers. This grade of resin is compatibilised to offer a high level of mechanical strength, outstanding elongation properties and toughness. The resin is based on corn starch which is a renewable material.Cardia Compostable B-F resin is certified biodegradable during composting in professionally managed composting facilities. Complies with International Standard ISO16929, ISO 14855 Certified compostable for blown film applications up to 120 microns. Cardia Compostable B-F complies with: European Standard EN13432, USA Standard ASTM 6400, Australian Standard AS 4736 and Japanese "GreenPla" Standard Chinese Environmental Labelling. Cardia Compostable B-F is a completely biodegradable polymer suitable for the manufacturing of film-type products. It can be directly used in the film blowing process. It does not contain any non-degradable polymers such as PE, PP, PS and PVC. Independent university testing shows that after biodegradation Cardia Compostable B-F does not leave any harmful residues.This film grade has been evaluated for compostability in accordance with international standard ISO 16929 (2002-11- 01) "Plastics — Determination of the Degree of Disintegration of Plastic Materials under Defined Composting Conditions in a Pilot Scale Test". According to the European certification scheme for biodegradable materials, Performance Standard EN 13432, the pass threshold for this test is 90% of the material passing through a 2 mm sieve after the 12 week test period.The testing shows that the plastic film samples used in this test are completely compostable as demonstrated by their 100% disintegration after 3 months and > 90% mineralization in less than 6 months. In the laboratory scale composting test according to ISO 14855: 1999 Cardia Compostable B-F film grade resin reached 90% biodegradation relative to cellulose reference material and meets the biodegradability requirement specified in the EN 13432 standard.Application Examples Compostable bags Shopping bags/Check-out bags Garbage bags Leaf litter bags Green bin liners Produce and meat liners Overwrap Packaging Mulch film Breathable film.


Mitsui Chemicals
TPX® MX002
Polymer Name: Polymethylpentene (PMP)
Processing Methods: Extrusion Coating, Extrusion, Film Extrusion, Fibers Extrusion, Blow Molding, Profile Extrusion, Injection Molding, Pipe, Profile & Tubing Extrusion
Melt Flow Index: 21.0 - 21.0 g/10 min
TPX™ MX002TPX™ MX002 is a Polymethylpentene Copolymer (PMP Copolymer) material. It is available in North America for blow molding, extrusion, extrusion coating, fiber (spinning) extrusion, injection molding, pipe extrusion, or profile extrusion. Primary attribute of TPX™ MX002: Good Stiffness.TPX™ MX002TPX™ is a 4-methylpentene-1-based olefin copolymer.TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for industrial materials, including mandrels and sheaths in the manufacture of high-pressure rubber hose, mold cups to create LED light and other applications such as release film on FPC manufacturing process and release paper in the manufacture of synthetic leather.Furthermore, TPX™ possesses a lowest density among thermoplastic polymers and then provides the molded articles with lower weight. This leads to reduce the environmental load for transportation. It is also noted that TPX™ is a halogen-free polymer denoted as environmentally-friendly material.TPX™ is also used for food-related applications such as food wraps, food preservation packs, baking carton and microwave oven tableware.


Orion Engineered Carbons
HIBLACK® 40B2
Function: Conductive Agent, Pigment
Pigment Type: Inorganic Pigments
Color: Black
Compatible Polymers & Resins: Polyamides, Low-Density Polyethylene (LDPE), Polypropylenes (PP), Poly(Methyl Methacrylate) (PMMA), Unsaturated Polyester (UPE), Polycarbonates (PC), Polyethylenes (PE), Polyvinyl Chloride (PVC), Acrylonitrile Butadiene Styrene (ABS), Acrylonitrile Styrene Acrylate (ASA), Styrene Acrylonitrile (SAN), Epoxies (EP), Polystyrenes (PS), High-Density Polyethylene (HDPE)
Processing Methods: Injection Molding, Extrusion
End Uses: Furniture, White Goods & Small Appliances, Geo Membranes, Automotive Interior Parts, Appliances, Automotive Electronics, Pipes, Automotive Exterior Parts, Fenders, Agricultural Applications, Textile Applications
HIBLACK® 40B2 is a general purpose conductive carbon black suitable for polyolefins and other thermoplastic materials. It is also suitable in rubber compounds.


Greene Tweed
Chemraz™ 504
Polymer Name: Polytetrafluoroethylene (PTFE)
Specifically formulated for low-pressure applications requiring a low sealing force, Chemraz® 504 is recommended for a wide variety of medical and biotechnology device applications requiring long-term seal reliability. Chemraz 504 offers excellent performance in dynamic and static analytical equipment applications where slight lubrication is preferred to lower friction. Chemraz 504 is suitable for service temperatures ranging from 0°F to 400°F (-18°C to 204°C).FEATURES & BEN EEITS Excellent performance under low pressure and low sealing force Lubricated compound to minimize friction Dependable balance of physical properties Good chemical resistance APPLICATIONS Analytical lnstrumentation—Gaskets and O-rings Solenoid \/alves—Plunger seals, gaskets and O-rings


VYNOVA
VYNOVA™ S6706
Polymer Name: Polyvinyl Chloride (PVC)
Processing Methods: Extrusion
End Uses: Fittings, Windows & Doors, Fencing & Decking, Pipes, Window & Door Profiles, Construction Applications, Conduit
VYNOVA™ S6706 is a medium molecular weight and medium porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion of PVC articles requiring excellent mechanical properties such as: window profiles, rigid profiles, and pipes.


Asahi Kasei Corporation
Leona™ 14G33
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Heat Stabilizer
Flexural Modulus: 10400.0 - 10400.0 MPa
Leona™ 14G33 is a Polyamide 66 (Nylon 66) product filled with 33% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Leona™ 14G33 include automotive, electrical/electronic applications and engineering/industrial parts.Characteristics include: Flame Rated Creep Resistant Fatigue Resistant Heat Resistant Heat Stabilizer


Chandra Asri Petrochemical
Asrene® SP4808
Polymer Name: High Density Polyethylene (HDPE)
Processing Methods: Extrusion, Pipe, Profile & Tubing Extrusion
Melt Flow Index: 0.06 - 0.06 g/10 min
Asrene® SP 4808 is a High Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application: Plumbing/Piping/Potable Water.Characteristics include: High ESCR (Stress Crack Resistant) High Strength


Prime Polymers
Evolue® SP2520
Polymer Name: Metallocene Linear Low Density Polyethylene (mLLDPE), Linear Low Density Polyethylene (LLDPE)
Processing Methods: Film Extrusion
Melt Flow Index: 1.9 - 1.9 g/10 min
Evolue™ SP2520 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP2520 include film, agricultural, coating applications and industrial applications.Characteristics include: Fast Molding Cycle Good Aesthetics Good Stiffness


DuPont
Crastin® ST820 BK503
Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester
Processing Methods: Injection Molding, Extrusion, Coating, Sheet, Plaques & Profiles Extrusion
Flexural Modulus: 1500.0 - 1500.0 MPa
Crastin® ST820 BK503 is an unreinforced, Super Tough polybutylene terephthalate resin for injection molding.


DuPont
Hytrel® 4068FG
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Corrugated Pipe, Film, Thermoforming Applications, Tubing, Wire & Cable Applications
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 47.0 - 47.0 MPa
Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.