Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.5 | g/cm3 | ISO 1183-1 |
| Water Absorption (immersed in water 24/96h at +23°C) | 0.18, 0.36 | % | — |
| Water Absorption (immersed in water 24/96h at +23°C) | 16, 32 | mg | ISO 62 |
| Water Absorption (when saturated in air +23°C / 50%RH) | 0.17 | % | ISO 62 |
| Water Absorption (when saturated in water +23°C) | 0.72 | — | ISO 62 |
| Melting temperature (DSC, +10°C/min) | 180.0 | °C | ISO 11357-1/-3 |
| Thermal conductivity (23°C) | 0.31 | W / (Km) | — |
| Length Extension Coefficient (23°C - 100°C) | 0.00012 | m / (mK) | — |
| Temperature Dependent Deflection (1.8MPa) | 100.0 | °C | ISO 75-1/-2 |
| Max. Operating Temperature in Air (Short Time) | 150.0 | °C | — |
| Max. Operating Temperature in Air (min 5000/20000h) | 105/90 | °C | — |
| Minimum Service Temperature | -20.0 | °C | — |
| Flammability (UL 94, 3/6 mm thickness) | HB/HB | — | — |
| Breaking Strength | 55.0 | MPa | ISO 527-1/2 |
| Tensile Strength | 55.0 | MPa | ISO 527-1/2 |
| Tensile Stress (Elongation at Break) | 10.0 | % | ISO 527-1/2 |
| Tensile Stress (Traction Module) | 3100.0 | % | ISO 527-1/2 |
| Compression (compression at 1/2/5% deformation) | 26, 44, 77 | MPa | ISO 604 |
| Charpy Impact Test Uncut | 30.0 | kJ/m2 | ISO 179-1 / 1eU |
| Charpy Impact Test Scored | 3.0 | kJ/m2 | ISO 179-1 / 1eU |
| Cultivation Hardening | 140.0 | N/mm2 | ISO 2039-1 |
| Rockwell Hardness | M84 | — | ISO 2039-2 |
| Electrical Impact Resistance | 20.0 | kV / mm | IEC 60243-1 |
| Volume Resistivity | min. 10E 14 | Ohm.cm | IEC 60093 |
| Surface Resistivity | min. 10E13 | Ohm | IEC 60093 |
| Relative Permittivity (100Hz) | 3.6 | — | IEC 60250 |
| Relative Permittivity (1MHz) | 3.6 | — | IEC 60250 |
| Electrical Loss Factor Tan δ (100 MHz) | 0.003 | — | IEC 60250 |
| Electrical Loss Factor Tan δ (1 MHz) | 0.008 | — | IEC 60250 |
| Creep Current Index (CTI) | 600.0 | — | IEC 60112 |