Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Area
- Uses
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be used with a sealant for chlorine-containing constituents or other strong oxidizing materials. This product is not suitable for use on plastic parts. Refer to Material Safety Data Sheet for instructions on safe handling of this material.
- Directions for Use
Substrates should be cleaned and degreased with a solvent such as acetone, MEK, or trichloroethylene. Do use mineral spirits or Stoddard solvent. Allow substrates to dry completely before applying sealing compound. Apply sealing compound to both surfaces and assemble. For faster cure speed and maximum bonding, apply INSTAbond® Primer N, INSTAbond® Primer T or INSTAbond® Primer F prior to application of sealing compound. Allow primer to dry thoroughly before applying sealing compound. Once fixturing has occurred, no adjustments should be made as this will decrease the sealing compound’s total locking strength once the fixture bond is broken.
Properties
- Color
- Physical Form
- Physical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Flash Point | min. 93 | ºC | ASTM D56 |
| Specific Gravity (25°C) | 1.1 | gms/ml | ASTM D792 |
| Viscosity (25°C) | 1200.0 | cPs | ASTM D445 |
| Value | Units | Test Method / Conditions | |
| Breakaway Torque (24 hours, 25°C) | 8.5 | N-m | - |
| Fixture Time: Primed Steel (25°C) | 3 - 5 | minutes | - |
| Fixture Time: Unprimed Steel (25°C) | 5 - 10 | minutes | - |
| Full Cure: Primed Steel (25°C) | 12.0 | hours | - |
| Full Cure: Unprimed Steel (25°C) | 18.0 | hours | - |
| Hot Strength (2 hours, 93°C, breakaway torque) | 5.8 | - | - |
| Prevailing Torque (24 hours, 25°C) | 5.1 | N-m | - |
| Solvent Resistance: (Breakaway Torques) Distilled Water | 8.4 | N-m | - |
| Solvent Resistance: (Breakaway Torques) Ethylene Glycol | 5.8 | N-m | - |
| Solvent Resistance: (Breakaway Torques) JP-4 Jet Fuel | 5.0 | N-m | - |
| Solvent Resistance: (Breakaway Torques) Motor Oil (10W-30) | 7.8 | N-m | - |
| Solvent Resistance: (Breakaway Torques) n-Butanol | 6.5 | N-m | - |
| Solvent Resistance: (Breakaway Torques) Toluene | 5.2 | N-m | - |
| Temperature Range | -65 - 300 | ºF | - |
Regulatory & Compliance
- Compliance
INSTAbond® 122 complies with MIL-S-46163 Type II Grade M / ASTM D 5363-03 AN0311.
Technical Details & Test Data
- UV Light Properties
Illumination at 230 nm.
Storage & Handling
- Storage
This product should be stored less than 100 deg F and out of direct sunlight. Product should be stored in the original, closed container. NEVER combine liquid primers/activators with anaerobic sealing compounds as violent chemical reactions will result. Shelf life is 18 months when stored in accordance with manufacturer’s recommendations.