Products

Acculam™ Melaglas G5/G9 comprised of flame retardant melamine resin and a woven fiberglass glass substrate. It qualifies to NEMA G5/G9 and MIL-I-24768/1/8.This material has high strength and excellent arc resistance and electrical insulating properties which allows it to be used as mechanical support in electrical equipment, switchgear, and slot wedges where Class "B" insulation is required.

Acculam™ Epoxyglas HT-ESD comprised of an epoxy resin binder and a woven glass substrate. Surface properties are Electro Static Dissipative on 1 or 2 sides.Static dissipative properties are embedded in surface layer(s) making this ideally suited as test fixture material for printed circuit boards. Examples: Solder pallets, Assembly fixtures, Automated test equipment, ATE fixtures, and Electronic assembly workstation surfaces.

Acculam™ Phenolfab G3 comprised of a high temperature phenolic resin binder and a woven fiberglass substrate. It qualifies to NEMA G-3 and MIL-I-24768/18.This material has good heat resistance, high mechanical strength and low thermal expansion. It finds applications in motor slot insulation, valve plates, and other applications requiring good thermal insulation characteristics.

Acculam™ Epoxyglas G10/FR4 is a laminate sheet comprised of a flame retardant epoxy resin and a woven fiberglass substrate. This grade qualifies to NEMA FR4 and MIL-I-24768/27.This material has high mechanical strength and excellent electrical insulating qualities in both dry and humid conditions. These attributes along with good fabricating characteristics allow this grade to be used in a wide variety of electrical and mechanical applications.

Acculam™ Phenolkraft Paper X/XX comprised of a phenolic resin binder and a saturating kraft (paper) substrate. It qualifies to NEMA X/XX and MIL-I-24768/11/12.This is a general purpose grade with good mechanical and electrical insulating properties. Its versatility, good machining characteristics and lower cost encourage its applications as switch plates, barriers, terminal strips, washers and other electrical components.

Acculam™ Phenolfab Linen L/LE comprised of a phenolic resin and a woven linen (cotton) substrate. This material qualifies to NEMA L/LE and MIL-I-24768/13/15.This material's improved moisture resistance and machining characteristics allow its use in a wider range of electrical and structural applications than paper grades. Its finer weave fabric also allows for finer machined details& thinner sheets than grades C and CE.

Acculam™ Siliglas G7 comprised of a high performance silicone resin and a woven fiberglass substrate. It qualifies to NEMA G-7 and MIL-I-24768/17.This material has high heat resistance, low dissipation factor, and excellent arc resistance. It is flame resistant with low smoke evolution, and meets the needs of Class "H" insulation. It is used in high frequency telecom equipment, transformers and items subjected to high heat.