AcoustiGuard – WILREP LTD.

GREEN GLUE NOISEPROOFING SEALANT is a water based acoustic caulk used to seal edges and seams of the drywall and subfloor. Green Glue Sealant can be easily mudded and painted over. It cleans up with simple soap and water. This acoustic caulk remains permanently flexible and will not crack. Green Glue Noiseproofing Sealant adheres to most surfaces including wood, concrete, metal, glass, plastic and gypsum.

BARYMAT M-600D consist of a deep embossed vinyl “carpet like” wear surface on top of high transmission loss, 1.0 lb and 2. lb per sq. ft. flexible barrier with a 0.25 in. for the M-100D and a 0.375 in. closed cell modified PVC/nitrile rubber foam decoupling layer. The scuff resistant surface provides durability while the closed cell foam delivers excellent vibration isolation for maximum comfort. Baymat M-100D & M-600D is easy to install, effective treatments which require water and oil absorption resistance.

Barymat BV-14C is a composite noise barrier / absorption material protected with a performated vinyl film facing. The composite consists of perforated vinyl scuff wear and contamination resistance, 1.0 inch of acoustic polyurethane foam for sound absorption, a filled, flexible 1.6 lb. per sq. ft. barrier for transmission loss and a .25 inch polyurethan foam decoupler layer. it is suitable for moderately dirty environments where it is not exposed to contaminants such as direct oil or water spray.

CONVOLUTED FOAM - ACOUSTIC SOUND ABSORBER is a open cell polyurethane noise absorbing foam developed to provide high quality absorption of sound, especially in the mid to low range frequencies. The “cone” like shape provides four times more absorptive surface area than flat the acoustic foams and it deflects and entraps sound waves within the material making it a very acoustically efficient.

Barymat M-100D consist of a deep embossed vinyl “carpet like” wear surface on top of high transmission loss, 1.0 lb and 2. lb per sq. ft. flexible barrier with a 0.25 in. for the M-100D and a 0.375 in. closed cell modified PVC/nitrile rubber foam decoupling layer. The scuff resistant surface provides durability while the closed cell foam delivers excellent vibration isolation for maximum comfort. Baymat M-100D & M-600D is easy to install, effective treatments which require water and oil absorption resistance.

Barymat BTMM-14C is a versatile and durable noise barrier / absorption material. The composite consists of (from top down) a metallized mylar facing that has high contamination resistance and light reflectivity, 1.0 in. of acoustic urethane foam for sound absorption, a loaded, flexible 1.6 lb. per sq. ft. barrier for transmission loss and a .25 In. urethane foam decoupler. It is suitable for very dirty, wet or oily environments and can be exposed to direct spray.

NOISEBLOK - MASS LOADED VINYL (MLV) made from mineral filled, 100% recycled PVC and is designed for maximum sound transmission loss in a thin sheet material. This strong and flexible noise barrier is easy to work with and can be used in many applications such as Walls, Pipes, Ducts, Window Mullions, Fences or Vehicles. Noise Blok is non-toxic and available in 1 lb and 2 lb per sq. ft. with 1/2 lb. on special order. Noise Blok is commonly installed directly on the studs before drywall is applied to allow the material to hang freely. The material is easy to cut with standard ‘snap off blade’ utility knives making site fitting fast and easy. Standard roll sizes are kept in stock and custom widths and lengths are available for larger orders.