Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Generic Type
Alkyd
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- VOC compliant
- Corrosion resistant
Applications & Uses
- Applications
- Substrate & Surface Preparation
- Must be clean and dry. Any dirt, dust, oil, contaminants, loose rust or loose mil scale must be removed.
- Immersion Carbon Steel: Not Recommended
- Non-Immersion Carbon Steel: Minimum SSPC-SP3 Power tool Cleaning. For optimum performance SSPC- SP6 Commercial Blast, surface profile 1.5-3.0 Mil.
- Galvanized Steel: Not recommended
- Previously painted surfaces: Surface must be sufficiently roughened, either by abrasive blasting or mechanical abrasion. Surface must attain a minimum 3B rating in accordance with ASTM D3359 “X-Scribe” test. Apply a test patch to check compatibility, prior to primary application.
- Topcoats: APCO201 Industrial Enamel, 202 Industrial Aluminum Paint
- Application Equipment
Spray Application:
- Conventional: Pressure pot with dual regulators, 3/8” I.D. material hose, Binks 2001 Gun w/66 series nozzles and 565 needle.
- Airless: Graco 36:1 Min. 1⁄4” material line. Tip size .013. Output PSI- 3000-3600
Brush & Roller:
- Brush: Natural Bristle
- Roller: 1⁄4” Nap cover with Phenolic Core Mixing &
- Mixing & Thinning
Components: One
Mixing: Power mix to uniform color & consistency
Thinning:- Spray: Up to 12 oz/gal with S102
- Application
- Pre-application: Flush all equipment with thinner S102 or Mineral Spirits
- Temperature: Application range from 50°F-110°F surface temperature. Do not apply below 50°F.
- Method: Apply one coat maintaining a wet edge to achieve a WFT of 4-6 Mils. Maximum performance will be achieved with two coats totaling 4-6 mils DFT.
- Application Continued
Inspection: Visually inspect film to ensure adequate coverage.
Clean up & disposal: After use immediately flush all equipment with thinner S102 or mineral spirits. Dispose of all containers, solvents and unused materials in accordance with all local, state and federal regulations.
Curing schedule: Times based upon 75°F
- Dry to touch: 2 hours
- Dry to topcoat: 24 hours
- Dry through: 48 hours
Dry times are greatly affected by weather conditions and film thickness.
Properties
- Color
- Typical Properties
- Performance Properties
| Value | Units | Test Method / Conditions | |
| Solids Content | 52.0 | % by Volume | - |
| VOC Value | 3.15 | lbs/gal | EPA Method 24 |
| Value | Units | Test Method / Conditions | |
| Theoretical Coverage (mil) | 834 | ft² | |
| Theoretical Coverage (3 mil DFT) | 278 | ft² |
Packaging & Availability
- Packaging Type
- Packaging & Handling:
- Unit sizes: Ones, Fives and Drums
- Shipping Weight: 12 lbs/gal Unit