Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Features
- Fast cure
- Excellent adhesion to plastics, glass and metal substrates
- Good wetting performance
- Soft and flexible
- Fast cure, excellent adhesion to glass, good wetting performance.
- Product Highlights
It offers low stress, low modulus, low extractable, optically clear UV-curable acrylate based adhesives. These adhesives have good adhesion to many type of substrates including hard to bond plastic substrates such as polystyrene, and they can be used in microplate assembly due to their compatibility with various cell lines.
Applications & Uses
- Applications
- Cure Method
- Coating Type
- Applications
- Optical bonding
- Laminating adhesive for plastic film
- Bonding
- Microplate assembly
Properties
- Color
- Physical Properties
- Typical Properties
- Cured Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Elongation (25°C, 50% RH) | 900.0 | % | ASTM D638 |
Tensile Strength (25°C, 50% RH) | 3.0 | Mpa | ASTM D638 |
Young's Modulus (25°C, 50% RH) | 2.0 | Mpa | ASTM D638 |
Value | Units | Test Method / Conditions | |
Operating Temperature | -40 to 100 | °C | — |
Value | Units | Test Method / Conditions | |
Coefficient of Thermal Expansion [Above Tg (x10⁻⁶)] | 250.0 | °C⁻¹ | ASTM E831 |
Coefficient of Thermal Expansion [Below Tg (x10⁻⁶)] | 180.0 | °C⁻¹ | ASTM E831 |
Depth of cure | min. 1 | mm | — |
Glass Transition Temperature (DMA) | 46.0 | °C | — |
Hardness | 17 - 20 | Shore D | — |
Poisson’s ratio | 0.37 - 0.38 | — | — |
Refractive Index of Cured Film (25°C, 589 nm (D)) | 1.5 | — | — |
Shrinkage (Linear) | max. 0.3 | % | — |
Value | Units | Test Method / Conditions | |
Density | 1.1 | g/ml | — |
Pot Life or Working Life (20 - 30°C) | 3.0 | months | — |
Shelf Life (20 - 30°C) | 6.0 | months | — |
Viscosity (25°C) | 4,000 - 7,000 | cps | — |
Technical Details & Test Data
- UV Curing Conditions
- Metal halide/Mercury UV: UV-A (320-400 nm), intensity: 50-1,000 mW/cm2
- or LED-365 nm, UV light intensity: 100 to 1,000 mW/ cm2
LED-365 nm UV intensity(mW/cm2 ) x time (sec) 100 20 sec or more or 200 10 sec or more or 300 7 sec or more or 400 5 sec or more or 500 4 sec or more or 1,000 2 sec or more Metal Halide/Mercury(UV-A: 320-400 nm)
UV intensity(mW/cm2 ) x time (sec) 50 20 sec or more or 100 10 sec or more or 200 8 sec or more or 500 2 sec or more or 1,000 1 sec or more
Safety & Health
- Safety and Handling
The uncured adhesive can be cleaned from apparatus with isopropyl alcohol (IPA), methyl ethyl ketone (MEK), or commercial alcohol based cleaning solution. Avoid direct skin and eye contact. Use only in well ventilated areas. Use protective clothing, gloves and safety goggles.
Storage & Handling
- Shipment and Storage
- Shipment: no restriction on shipment and no cold shipment is needed
- Storage: After the adhesive is received in black syringes or amber HDPE bottles, room temperature storage (15-30°C) in the original container is required.