company tower banner

Products

Additek

Matching Product Categories

Elastomers

15 Products found on Additek

TDSWith TDS

Moulex® 31GS3 banner

Functions:Release Agent, Mold Release Agent
Processing Methods:Resin Transfer Molding
End Uses:Marine Applications, Aerospace Applications

Moulex® 31GS3 acts as mold release agent. It is used in resin transfer molding.

Moulex® 154 NS banner

Moulex® 154 NS

Functions:Mold Release Agent, Release Agent
Compatible Polymers & Resins:Vinyl Esters, Unsaturated Polyester (UPE)
Processing Methods:Resin Transfer Molding
End Uses:Tanks, Marine Applications, Aerospace Applications, Pipes

Moulex® 154 NS is internal mold release agent. It improves external release agent performances.

Moulex® 77PD 70 banner

Moulex® 77PD 70

Functions:Antiozonant
Compatible Polymers & Resins:Natural Rubbers (NR), Styrene Butadiene Rubber (SBR)
End Uses:Footwear, Weatherstripping, Radiator Seals

Moulex® 77PD 70 is antiozonant on carrier silica for natural and synthetic rubber.

Moulex® TPR banner

Functions:Mold Release Agent, Release Agent
Compatible Polymers & Resins:Natural Rubbers (NR), Polybutadienes, Ethylene Propylene Diene Monomer (EPDM), Styrene Butadiene Rubber (SBR)
End Uses:Weatherstripping, Radiator Seals, Tires, Footwear

Moulex® TPR is a semi-permanent water based release agent. It possesses high adhesivness on molds.

Moulex® 100 banner

Functions:Release Agent, Mold Release Agent
End Uses:Mold Making

Moulex® 100 is free of silicone oil, external semi permanent release agent. Offers high gliding effect. It possesses highly abrasive resistant properties. Ready to be used and allows obtaining a thin release coating without transfer to molded parts. Due to its composition it also reduces mold fouling.

Calsec® FE banner

Chemical Name:Calcium Hydroxide
Compatible Polymers & Resins:Fluoroelastomer (FKM)
Functions:Crosslinking Agent
Features:Food Contact Acceptable

Calsec® FE contains micronised calcium hydrooxide. It is used in fluoroelastomers crosslinking.

Moulex® RI 04 banner

Functions:Processing Aid

Moulex® RI 04 is a processing aid for all types of elastomers. It increases filler dispersion and offers reduced mixing time. It improves molding properties.

Moulex® WD8 banner

Functions:Release Agent, Mold Release Agent
End Uses:Mold Making

Moulex® WD8 is external semi permanent water based release agent. It exhibits high gliding effect. It possesses highly abrasive resistant.

Moulex® 352 banner

Functions:Mold Release Agent, Release Agent, Wetting Agent
Compatible Polymers & Resins:Unsaturated Polyester (UPE), Vinyl Esters
Processing Methods:Pultrusion
End Uses:Tanks, Pipes

Moulex® 352 is internal mold release agent. It also acts as wetting agent.

Moulex® EGDMA 70 banner

Moulex® EGDMA 70

Chemical Name:Ethylene Glycol Dimethacrylate
Compatible Polymers & Resins:Chlorosulphonated Polyethylene Rubber (CSM)
Functions:Vulcanizing Agent
Features:Good Mechanical Properties, Good Solvent Resistance

Moulex® EGDMA 70 by Additek is a vulcanization co-agent on carrier silica. It offers increased mechanical properties with peroxide cured compounds. It exhibits increased resistance to solvents.

Moulex® TMPTMA 70 banner

Moulex® TMPTMA 70

Chemical Name:Trimethylolpropane trimethacrylate
Compatible Polymers & Resins:Chlorosulphonated Polyethylene Rubber (CSM)
Functions:Vulcanizing Agent
Features:Low Compression Set, Chemical Resistant, Good Mechanical Properties, Good Solvent Resistance

Moulex® TMPTMA 70 by Additek is a vulcanization co-agent on carrier silica. It offers increased mechanical properties with peroxide cured compounds. It exhibits increased resistance to solvents. Provides improved compression set.

Moulex® 155 PU banner

Moulex® 155 PU

Functions:Mold Release Agent, Release Agent
Compatible Polymers & Resins:Unsaturated Polyester (UPE)
End Uses:Pipes

Moulex® 155 PU is internal mold release agent. It reduces the consumption of external release agent and provides reduced mold fouling.